| 挤出机螺杆熔融段的优化设计 |
| |
| 引用本文： | 梁基照.挤出机螺杆熔融段的优化设计[J].橡胶工业,2002,49(10):603-606. |
| |
| 作者姓名： | 梁基照 |
| |
| 作者单位： | 华南理工大学工业装备与控制工程系,广东,广州,510641 |
| |
| 摘 要： | 讨论了挤出机螺杆熔融段的优化设计问题。以单位产量能耗最小为优化目标 ,建立简化的挤出机熔融段螺杆优化设计的数学模型 ,应用复合形法求解。结果表明 ,计算所得熔融段起、末端的螺槽深度、螺纹顶宽度和螺纹升角均位于或接近文献中所建议的最佳取值范围
|
| 关 键 词： | 挤出机 螺杆 优化设计 |
| 文章编号： | 1000-890(2002)10-0603-04 |
| 修稿时间： | 2002年4月9日 |
Optimized design of melting zone for extruder screw |
| |
| LIANG Ji-zhao.Optimized design of melting zone for extruder screw[J].China Rubber Industry,2002,49(10):603-606. |
| |
| Authors: | LIANG Ji-zhao |
| |
| Affiliation: | South China University of Technology |
| |
| Abstract: | The design of the melting zone for extruder screw was optimized.A simplified mathematic model of the melting zone for extruder screw was established and solved by the complex method to minimize the specific energy consumption.The results showed that the calculated depth of base,top width and spiral angle of flight at the start and end of the melting zone for extruder screw were in or close to the ranges recommended in literatures |
| |
| Keywords: | extruder screw optimized design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《橡胶工业》浏览原始摘要信息 |
|
点击此处可从《橡胶工业》下载全文 |
