| 丙烯酸酯乳液影响因素的研究 |
| |
| 引用本文： | 李维盈,凌爱莲,桑鸿勋,吕大鹏. 丙烯酸酯乳液影响因素的研究[J]. 北京工业大学学报, 2002, 28(2): 150-154. DOI: 10.3969/j.issn.0254-0037.2002.02.006 |
| |
| 作者姓名： | 李维盈 凌爱莲 桑鸿勋 吕大鹏 |
| |
| 作者单位： | 北京工业大学,环境与能源工程学院,北京,100022 |
| |
| 摘 要： | 研究了乳化剂配比、缓冲剂加入方式、玻璃化温度(Tg)、聚合工艺对乳液性能的影响. 结果表明:采用非离子型乳化剂较多的复合乳化剂配比和缓冲剂在反应前一次性加入的方式有利于提高丙烯酸酯乳液的稳定性,从而获得符合要求的乳液;聚合物体系的Tg、聚合工艺对乳液性能影响较大,采用软壳硬核的聚合工艺设计可大大降低最低成膜温度(MFT).
|
| 关 键 词： | 丙烯酸酯乳液 缓冲剂 玻璃化温度 聚合工艺 |
| 文章编号： | 0254-0037(2002)02-0150-05 |
| 修稿时间： | 2001-07-19 |
Study of Factors Influencing Properties of Acrylic Emulsion |
| |
| LI Wei-ying,LING Ai-lian,SANG Hong-xun,LU Da-peng. Study of Factors Influencing Properties of Acrylic Emulsion[J]. Journal of Beijing Polytechnic University, 2002, 28(2): 150-154. DOI: 10.3969/j.issn.0254-0037.2002.02.006 |
| |
| Authors: | LI Wei-ying LING Ai-lian SANG Hong-xun LU Da-peng |
| |
| Abstract: | The effects of the proportion of emulsifier, the feeding mode of buffer agent, the glass transition temperature(Tg) on the properties of acrylic emulsion were studied. The results show that the stability of acrylic emulsion is increased by using more nonionic emulsifier and feeding the buffer agent before polymerization wholly. The required emulsion can be obtained in this way. The properties of acrylic emulsion are deeply affected by glass transition temperature and polymerizing technology and the lowest-filming temperature is decreased greatly by using the polymeric design of soft-shell and hard-core. |
| |
| Keywords: | acrylic emulsion buffer agent glass transition temperature polymerizing technology |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
