首页 | 本学科首页   官方微博 | 高级检索  
     

电容分压型电子式电压互感器研究与设计
引用本文:王红星,张国庆,蔡兴国,郭志忠.电容分压型电子式电压互感器研究与设计[J].电力自动化设备,2009,29(10).
作者姓名:王红星  张国庆  蔡兴国  郭志忠
作者单位:哈尔滨工业大学电气工程及自动化学院,黑龙江,哈尔滨,150001
基金项目:哈尔滨市科技攻关计划项目 
摘    要:建立电力系统中电容分压型电子式电压互感器(ECVT)电容分压器的数学模型,依据电子式电压互感器暂、稳误差的定义,提出运用ECVT电容分压器的数学模型分析ECVT误差特性的思想.以220 kV系统ECVT为例,利用ECVT电容分压器的数学模型,使用仿真软件综合分析了三相ECVT的暂、稳态误差,进而完成传感器参数的优化设计.仿真和优化结果表明.杂散电容是引起ECVT测量误差的根本原因,它对电容分压器分压比的影响随着主电容值的减小而增大,在主电容值不低于3500pF时,ECVT能达到0.2级精度.

关 键 词:电子式电压互感器  电容分压器  误差特性  参数优化  建模

Electronic capacitive voltage transformer
WANG Hongxing,ZHANG Guoqing,CAI Xingguo,GUO Zhizhong.Electronic capacitive voltage transformer[J].Electric Power Automation Equipment,2009,29(10).
Authors:WANG Hongxing  ZHANG Guoqing  CAI Xingguo  GUO Zhizhong
Affiliation:WANG Hongxing,ZHANG Guoqing,CAI Xingguo,GUO Zhizhong(Harbin Institute of Technology,Harbin 150001,China)
Abstract:The mathematical model of ECVT(Electronic Capacitive Voltage Transformer) in power system is established,which is used to analyze its error characteristics based on the definitions of transient-and steady-state errors.For a 220 kV-ECTV system as an example,the transient-and steady-state errors of three-phase ECVT are comprehensively analyzed with the model by simulation software and the parameters of sensor are further optimized.The results of simulation and optimization indicate that,the stray capacitance ...
Keywords:electronic capacitive voltage transformer  capactive divider  error characteristics  parameter optimization  modeling  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《电力自动化设备》浏览原始摘要信息
点击此处可从《电力自动化设备》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号