首页 | 本学科首页   官方微博 | 高级检索  
     

一种基于开关次数最小的含零电压矢量永磁同步电机直接转矩控制开关表
引用本文:李耀华,曲亚飞,师浩浩,孟祥臻,焦森. 一种基于开关次数最小的含零电压矢量永磁同步电机直接转矩控制开关表[J]. 电机与控制应用, 2018, 45(2): 34-39
作者姓名:李耀华  曲亚飞  师浩浩  孟祥臻  焦森
作者单位:长安大学汽车学院;
基金项目:国家自然科学基金项目(51207012);陕西省工业科技攻关项目(2016GY-069);陕西省微特电机及驱动技术重点实验室开放基金项目(2013SSJ2002)
摘    要:介绍了永磁同步电机(PMSM)直接转矩控制(DTC)理论,研究了零电压矢量的作用。基于开关次数最小提出了选择零电压矢量的策略,给出了一种新型含零电压矢量开关表。仿真结果表明使用新型开关表PMSM DTC系统能正常驱动。与传统开关表相比,使用新型开关表DTC系统开关次数降低了近56%,进而降低了开关损耗。

关 键 词:永磁同步电机   直接转矩控制   零电压矢量   开关表

A Switching Table Based on Minimum Switching Times UsingZero Voltage Vectors in Permanent Magnet Synchronous Motor Direct Torque Control System
LI Yaohu,QU Yafei,SGI Haohao,MENG Xiangzhen and JIAO Sen. A Switching Table Based on Minimum Switching Times UsingZero Voltage Vectors in Permanent Magnet Synchronous Motor Direct Torque Control System[J]. Electric Machines & Control Application, 2018, 45(2): 34-39
Authors:LI Yaohu  QU Yafei  SGI Haohao  MENG Xiangzhen  JIAO Sen
Abstract:The theory of direct torque control (DTC) in permanent magnet synchronous motor (PMSM) was investigated. The effect of zero voltage vectors for the PMSM DTC drives was analyzed. The strategy of selecting zero voltage vector was proposed based on the minimum switching times, and a new switching table with zero voltage vectors was given. Simulation results showed that the PMSM DTC system could work properly using the new table. Switching times of the DTC system using new switching table were decreased by direct torque control nearly 56% compared to conventional switching table, therefore, switching loss was decreased.
Keywords:permanent magnet synchronous motor (PMSM)   direct torque control (DTC)   zero voltage vector
本文献已被 CNKI 等数据库收录!
点击此处可从《电机与控制应用》浏览原始摘要信息
点击此处可从《电机与控制应用》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号