| Abstract: | Optimal temperature profiles for nylon 6 polymerization in plug–flow reactors have been obtained with end-point constraints involving the degree of polymerization and the cyclic dimer concentration, using the most recent kinetic information. Computations suggest that the temperature at the feed end of the reactor must be maintained close to the highest permissible level (determined by the boiling point of the ?-caprolactam). The temperatures in this region control the degree of polymerization more than other variables. Thereafter, the temperature should be reduced. This second zone controls the undesirable cyclic dimer concentration. The effect of a systematic change of values of the various design variables is studied. The profiles obtained herein are qualitatively similar to those obtained by earlier workers using similar formulations. However, they differ significantly from the profiles obtained by us earlier, using different objective functions which are more relevant to the design of new reactors. Attempts have also been made to obtain a global optimal scheme to produce polymer of a desired degree of polymerization and cyclic dimer content, using as short a reactor as possible, and using the water content and the modifier concentration in the feed as the independent variables. |
