| 异形件成形工艺与模具设计 |
| |
| 引用本文： | 赵建华,韩征权.异形件成形工艺与模具设计[J].模具工业,2008,34(2):27-29. |
| |
| 作者姓名： | 赵建华 韩征权 |
| |
| 作者单位： | 重庆大学,机械工程学院,重庆,400044 |
| |
| 摘 要： | 分析了异形件成形工艺,利用UG和Dynaform软件确定了零件的毛坯形状及尺寸,介绍了异形件落料拉深复合模结构设计和工作过程,对异形件拉深过程进行了数值模拟,根据模拟结果分析了成形性能。
|
| 关 键 词： | 成形工艺 毛坯尺寸 模具结构 数值模拟 |
| 文章编号： | 1001-2168（2008）02-0027-03 |
| 收稿时间： | 2007-10-12 |
| 修稿时间： | 2007年10月12 |
Forming technology and design of die for shaped piece |
| |
| ZHAO Jian-hua,HAN Zheng-quan.Forming technology and design of die for shaped piece[J].Die & Mould Industry,2008,34(2):27-29. |
| |
| Authors: | ZHAO Jian-hua HAN Zheng-quan |
| |
| Abstract: | The forming technology of a shaped piece was analyzed. The shape and dimensions of the blank were determined by using software UG and Dynaform. The structural design and working procedure of a die combining blanking and drawing for forming the component were presented. The drawing process was simulated and the forming performance was studied based on the result. |
| |
| Keywords: | forming technology blank dimensions die structure numerical simulation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
