首页 | 本学科首页   官方微博 | 高级检索  
     

Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn
作者姓名:陈永来  李劲风  吕宏军  李世晨  郑子樵  张宇伟  张绪虎
作者单位:[1]Aerospace Research Institute of Materials and Processing Technology, Beijing 100076, China [2]School of Materials Science and Engineering, Central South University, Changsha 410083, China
摘    要:The hot deformation behavior of a new AI-Cu-Li-Mg-Zr alloy was studied, and its microstructure and true stress were characterized as function of the deformation temperature and the strain rate using Gleeble-1500 thermal mechanical simulator. The results show that, with the increase of the strain rate from 0.001 s^-1 to 10 s^-1, the peak value of true stress is elevated at the same deformation temperature, and at the same strain rate the peak value of the true stress decreases with the increase of the deformation temperature from 360 ℃ to 520℃. Dynamic recrystallization easily occurs in the new Al-Cu-Li-Mg-Zr alloy under the lower strain rate and the higher deformation temperature, and dynamic recovery can usually be seen in this alloy under the higher strain rate of 10 s^-1 and the lower deformation temperature.

关 键 词:    合金  热成型技术  压力  流体
收稿时间:2007-07-15
修稿时间:2007-09-10

Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn
CHEN Yong-lai, LI Jin-feng, LIJ Hong-jun, LI Shi-chen, ZHENG Zi-qiao, ZHANG Yu-wei, ZHANG Xu-hu.Hot deformation behavior of Al-Cu-Li-Mg-Zr alloy containing Zn and Mn[J].Transactions of Nonferrous Metals Society of China,2007,17(A01):271-275.
Authors:CHEN Yong-lai  LI Jin-feng  LIJ Hong-jun  LI Shi-chen  ZHENG Zi-qiao  ZHANG Yu-wei  ZHANG Xu-hu
Abstract:
Keywords:Al-Li alloy  hot compression deformation  flow stress
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号