首页 | 本学科首页   官方微博 | 高级检索  
     

钨精矿预焙烧分离钨锡工艺研究
引用本文:聂华平,王秀红,万林生.钨精矿预焙烧分离钨锡工艺研究[J].稀有金属与硬质合金,2010,38(2).
作者姓名:聂华平  王秀红  万林生
作者单位:江西理工大学材料与化学工程学院,江西,赣州,341000
摘    要:在分析SnO2和Cu2FeSnS4碱浸出热力学行为差异的基础上,研究了钨精矿焙烧预处理对锡浸出率的影响。研究表明,苛性钠浸出钨精矿时,SnO2极难浸出,浸出率接近为零,而Cu2FeSnS4的浸出率则高得多,在一般浸出条件下可高达40%~50%。钨精矿经过氧化焙烧后,可明显降低锡的浸出率,在焙烧温度为700~800℃、焙烧时间为2 h工艺条件下,Cu2FeSnS4所含硫化状态的锡就可完全转化为SnO2。锡的浸出率由5.96%下降至1.05%。

关 键 词:钨精矿  焙烧预处理  钨锡分离  锡浸出率

Study on the Separation of Tungsten and Tin by Pre-roasting of Tungsten Concentrate
NIE Hua-ping,WANG Xiu-hong,WAN Lin-sheng.Study on the Separation of Tungsten and Tin by Pre-roasting of Tungsten Concentrate[J].Rare Metals and Cemented Carbides,2010,38(2).
Authors:NIE Hua-ping  WANG Xiu-hong  WAN Lin-sheng
Affiliation:NIE Hua-ping,WANG Xiu-hong,WAN Lin-sheng(School of Material and Chemical Engineering,Jiangxi University of Science &Technology,Ganzhou 341000,China)
Abstract:Based on the analysis and investigation of SnO2 and Cu2FeSnS4's thermodynamic difference in caustic soda leaching,the influence of roasting pretreatment on the leaching ratio of tin was studied.Results show that in caustic soda leaching process,SnO2 is very hard to leach with leaching rate close to zero,while the leaching rate of Cu2FeSnS4 is much higher,which can reach 40%~50% under normal leaching conditions.Upon oxidization and roasting of the tungsten concentrate,the leaching ratio of stannum can be gre...
Keywords:tungsten concentrate  roasting pretreatment  tungsten and tin separation  tin leaching rate  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号