| 中国实验快堆事故停堆后余热排放过程的数值模拟 |
| |
| 引用本文： | 廖智杰,任玉新,沈孟育,杨福昌,杨志明. 中国实验快堆事故停堆后余热排放过程的数值模拟[J]. 核科学与工程, 1999, 0(3) |
| |
| 作者姓名： | 廖智杰 任玉新 沈孟育 杨福昌 杨志明 |
| |
| 作者单位： | 清华大学工程力学系(廖智杰，任玉新，沈孟育)，中国原子能研究院(杨福昌，杨志明) |
| |
| 基金项目： | 国家“863”高科技项目，曹光彪基金，科学与工程计算国家重点实验室的资助 |
| |
| 摘 要： | 分析了中国实验快堆事故停堆后余热的排放过程。对热钠池中的流动与传热采用多孔介质模型的全三维数值模拟，对堆芯支路、事故热交换冷却回路和空冷塔冷却支路采用一维系统分析程序进行数值模拟。通过三维部分和一维部分相互耦合，模拟了余热排放的瞬态过程，得到了堆芯出口温度、燃料元件包壳的最高温度、余热热交换器的余热排放功率等许多重要参数随时间的变化曲线，对中国实验快堆的安全设计有重要的参考价值
|
| 关 键 词： | 快堆 事故停堆 余热 多孔介质 耦合 |
NUMERICAL SIMULATION OF DECAY HEAT REMOVAL AFTER CEFR SCRAM |
| |
| LIAO ZHIJIE REN YUXING SHEN MENGYU. NUMERICAL SIMULATION OF DECAY HEAT REMOVAL AFTER CEFR SCRAM[J]. Chinese Journal of Nuclear Science and Engineering, 1999, 0(3) |
| |
| Authors: | LIAO ZHIJIE REN YUXING SHEN MENGYU |
| |
| Abstract: | This paper analyzes the process of decay heat removal after Chinese Experimental Fast Reactor(CEFR)scram. The 3 D Thermal hydraulic analysis with porous media method is applied in hot plenum, 1 D system analysis is used in three loops of core, decay heat exchanger (DHX)and air cooling tower. In the calculation, 3 D and 1 D are coupled with each other to simulate transient process of decay heat removal. Many important numerical results, such as core outlet temperature variation, the highest temperature of cladding and removal power of DHX etc., are presented and discussed in this paper. They provide valuable reference for the design and safety assessment of CEFR. |
| |
| Keywords: | CEFR scram decay heat porous media |
| 本文献已被 CNKI 等数据库收录！ |
