| 高温炉结快速拆除的爆破工艺及其应用 |
| |
| 引用本文： | 史秀志,李山存,谢本贤. 高温炉结快速拆除的爆破工艺及其应用[J]. 工程爆破, 2006, 12(1): 48-51 |
| |
| 作者姓名： | 史秀志 李山存 谢本贤 |
| |
| 作者单位： | 中南大学资源与安全工程学院,长沙,410083;大冶有色金属公司,湖北黄石,435005 |
| |
| 摘 要： | 在爆破法拆除高温炉结的施工中,控制炸药在起爆前的温度并保护好炉体不受破坏是整个爆破过程的关键。本文介绍了在炉结温度高达700℃的情况下,采用快速爆破拆除高温炉结的原理及工艺。通过选择合理的爆破方案、适宜的爆破器材、新型的隔热材料、优化的爆破参数和可靠的起爆网路,在安全高效的前提下成功地实施高温炉结的控制爆破。
|
| 关 键 词： | 高温爆破 炉结 快速拆除 控制爆破 |
| 文章编号： | 1006-7051（2006）01-0048-04 |
| 收稿时间： | 2005-11-04 |
| 修稿时间： | 2005-11-04 |
TECHNIQUE OF FAST BLASTING DEMOLITION OF FURNACE SLAG WITH A HIGH TEMPERATURE AND ITS APPLICATION |
| |
| SHI Xiu-zhi,LI Shan-cun,XIE Ben-xian. TECHNIQUE OF FAST BLASTING DEMOLITION OF FURNACE SLAG WITH A HIGH TEMPERATURE AND ITS APPLICATION[J]. Engineering Blasting, 2006, 12(1): 48-51 |
| |
| Authors: | SHI Xiu-zhi LI Shan-cun XIE Ben-xian |
| |
| Abstract: | In demolishing the smelting furnace slag with high temperature by blasting,the key of the whole process is controlling explosive material's temperature and protecting furnace body from being damaged.This paper presents the theory and techniques of quick demolishing the slag with the temperature above 700℃.Operated on the selected proper blasting scheme,suitable blasting materials,new types of heat insulation materials,optimized blasting parameters and reliable priming circuit,the controlled blasting was successfully carried out in safety and high efficiency. |
| |
| Keywords: | Blasting in high temperature material Furnace slag Quick demolition Controlled blasting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
