首页 | 本学科首页   官方微博 | 高级检索  
     

FFT与CZT联合算法用于光纤法布里珀罗传感器解调
引用本文:戴霞娟,王鸣.FFT与CZT联合算法用于光纤法布里珀罗传感器解调[J].南京师范大学学报,2008,8(1):88-92.
作者姓名:戴霞娟  王鸣
作者单位:南京师范大学光电技术江苏省重点实验室,江苏南京210097
基金项目:国家自然科学基金 , 江苏省高技术研究发展计划项目
摘    要:通过对法布里-珀罗(F-P)型压力传感器傅里叶解调法的理论分析,在FFT的基础上引入CZT(线性调频Z变换),以对传统的FFT算法进行改进.通过Matlab模拟解调,该联合算法相对误差仅为0.1%.在对测量范围为0-3 MPa的F-P腔MEMS压力传感器进行的解调试验中,当采用256点FFT变换和100点CZT变换时,其分辨率达到0.05 MPa,拟合度为0.99316.实验证明,FFT、CZT联合解调的方法可以达到较高的精度,满足实际需求.其计算量小、解调精度高的优点,使它具有解调传感器复用信号的潜力.

关 键 词:F-P传感器  CZT  MEMS
文章编号:1672-1292(2008)01-0088-05
修稿时间:2007年1月15日

Application of the FFT Algorithm Associated With CZT in the Demodulation of Fabry-Perot Pressure Sensors
Dai Xiajuan,Wang Ming.Application of the FFT Algorithm Associated With CZT in the Demodulation of Fabry-Perot Pressure Sensors[J].Journal of Nanjing Nor Univ: Eng and Technol,2008,8(1):88-92.
Authors:Dai Xiajuan  Wang Ming
Affiliation:Jiangsu Key Lab of Opto-electronic Technology;Nanjing Normal University;Nanjing 210097;China
Abstract:In this paper,the FFT demodulation method of Fabry-Perot pressure sensors theoreticly is analysed,and CZT(chirp z-translation) is introduced here on the basis of FFT to improve the traditional FFT algorithm.In the simulation by Matlab,the relative error of this new method is just 0.1%,and in the experiment of the demodulation of the MEMS Fabry-Perot pressure sensor,whose metrical range is from 0 to 3MPa,its resolution reaches 0.05MPa and its linearity achieves 0.99316,where we use 256 dots' FFT and 100 dots...
Keywords:Fabry-Perot pressure sensors  CZT  MEMS  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号