| 细丝大电流MAG焊的熔滴过渡机制 |
| |
| 引用本文： | 华爱兵,殷树言,陈树君,白韶军,张晓亮. 细丝大电流MAG焊的熔滴过渡机制[J]. 焊接学报, 2009, 30(8): 93-96 |
| |
| 作者姓名： | 华爱兵 殷树言 陈树君 白韶军 张晓亮 |
| |
| 作者单位： | 北京中电华强焊接工程技术有限公司,北京,100076;北京工业大学,机械工程及应用电子技术学院,北京,100124 |
| |
| 摘 要： | 借助高速摄像分析了两种常规混合气体(80%Ar+20%CO2和98%Ar+2%O2)保护的细丝大电流MAG焊的基本特点,研究了焊丝伸出长度和保护气体成分对第二临界电流的影响规律,揭示了细丝大电流MAG焊的熔滴过渡机制.同时详细地分析了离心破断过渡、混合过渡和旋转短路过渡的产生条件和形成过程.并指出了80%Ar+20%CO2气体保护的细丝大电流MAG焊之所以无法应用的根本所在,从而确立了98%Ar+2%O2气体保护的细丝大电流MAG焊实现高效化焊接的可行性.
|
| 关 键 词： | 细丝大电流活性气体保护焊 第二临界电流 离心破断过渡 旋转短路过渡 |
| 收稿时间： | 2008-06-12 |
Mechanics of drop transfer for high-current density MAG welding process |
| |
| HUA Aibing,YIN Shuyan,CHEN Shujun,BAI Shaojun and ZHANG Xiaoliang. Mechanics of drop transfer for high-current density MAG welding process[J]. Transactions of The China Welding Institution, 2009, 30(8): 93-96 |
| |
| Authors: | HUA Aibing YIN Shuyan CHEN Shujun BAI Shaojun ZHANG Xiaoliang |
| |
| Affiliation: | 1.Wise Welding Technology & Equipment Limited Company;Beijing 100076;China;2.College of Mechanical Engineering and Applied Electronics Technology;Beijing University of Technology;Beijing 100022;China |
| |
| Abstract: | With the help of high-speed camera,the fundamental character of high current density MAG welding process with two types of conventional shielded gas is analyzed.The influence of wire extension and shielded gas component on the second critical current is researched.So the mechanics of drop transfer of high-current density MAG welding process is disclosed,which is centrifugally breaking transfer,mixed transfer and rotating short transfer.Moreover,the reason of why high-current density MAG welding process with... |
| |
| Keywords: | high current density MAG welding the second critical current centrifugally breaking transfer rotating short transfer |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
