| 工业建筑改建加固方法分析 |
| |
| 引用本文： | 姜文辉,巢斯,邹翱.工业建筑改建加固方法分析[J].工业建筑,2011,41(10):129-133. |
| |
| 作者姓名： | 姜文辉 巢斯 邹翱 |
| |
| 作者单位： | 同济大学建筑设计研究院（集团）有限公司,上海,200092 |
| |
| 基金项目： | 上海市科委资助项目(07dz05803) |
| |
| 摘 要： | 由于大跨度的框排架结构体系工业厂房建筑抗震性能较差,在改建成满足抗震规范的民用建筑时,宜采取合理适当的加固措施,保持原结构体系的稳定可靠。以双向增加柱间支撑调节结构刚度和荷载分配的某厂房的改建加固方法为例,介绍某厂房改建加固的设计、评审和施工的实践。实践表明：该方法具有加固工程量小,支撑布置灵活,加固后结构抗变形能力强...
|
| 关 键 词： | 工业厂房 框排架 改建加固 柱间支撑 |
ANALYSIS OF REBUILDING AND REINFORCING METHODS OF INDUSTRIAL BUILDINGS |
| |
| Jiang Wenhui Chao Si Zou Xuan Co.Ltd,Tongji University,Shanghai ,China.ANALYSIS OF REBUILDING AND REINFORCING METHODS OF INDUSTRIAL BUILDINGS[J].Industrial Construction,2011,41(10):129-133. |
| |
| Authors: | Jiang Wenhui Chao Si Zou Xuan CoLtd Tongji University Shanghai China |
| |
| Affiliation: | Jiang Wenhui Chao Si Zou Xuan(Architecture Design and Research Institute(Group) Co.Ltd,Tongji University,Shanghai 200092,China) |
| |
| Abstract: | Due to the fact that a large-span industrial building with frame and bent structure has a poor aseismic behavior,therefore rational reinforcing measures should be adopted to keep the stability and rebability of the original structural system when rebuilding it into a civil building that meets the requirements of the aseismic code.Taking the rebuiliding and reinforcing methods of a workshop for example,in which two-way addition of braces between columns is used to adjust structural rigidity and load distribu... |
| |
| Keywords: | industrial mill building frame and bent structure rebuild and strengthen braces between columns |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
