小直径模数齿轮滚刀滚切蜗轮的研究应用 |
| |
引用本文: | 曹世品,梁波. 小直径模数齿轮滚刀滚切蜗轮的研究应用[J]. 煤炭技术, 2002, 21(12): 71-72 |
| |
作者姓名: | 曹世品 梁波 |
| |
作者单位: | 1. 七煤集团,建设工程总公司,黑龙江,七台河,154600 2. 七煤集团,机械制造总公司,黑龙江,七台河,154600 |
| |
摘 要: | 在理论分析的基础上 ,提出了用小直径模数齿轮滚刀滚切的近似加工方法 ,并经实践证明 ,是一种切实可行的、经济的、能够保证蜗轮传动基本性能的蜗轮加工方法 ,特别适用于单件修配生产中。
|
关 键 词: | 小直径模数 滚刀滚切 蜗轮 |
文章编号: | 1008-8725(2002)12-0071-02 |
修稿时间: | 2002-06-20 |
Research application of minor diameter modulus gear milling worm wheel |
| |
Abstract: | On the basis of the theoretical analysis, provide the similar working method of minor diameter modulus gear milling.The paratice shows that it is a feasible and economic worm wheel working method which can ensure the basic performance of worm wheel transmission and suit single part repair. |
| |
Keywords: | minor diameter modulus milling worm wheel |
本文献已被 维普 万方数据 等数据库收录! |
|