| 基于UG和Excel接地开关的参数化设计 |
| |
| 引用本文： | 赵斐,戴道立,陆旻.基于UG和Excel接地开关的参数化设计[J].高压电器,2019,55(10):101-104,110. |
| |
| 作者姓名： | 赵斐 戴道立 陆旻 |
| |
| 作者单位： | 上海电器科学研究所(集团)有限公司,上海,200063;上海电器科学研究所(集团)有限公司,上海,200063;上海电器科学研究所(集团)有限公司,上海,200063 |
| |
| 摘 要： | 文中介绍的接地开关的参数化设计是一种综合性的设计方法,对于通过复杂公式计算才能得到的数据,采用UGNX8.0软件的分析功能获取(其他同类软件也有类似功能),同时利用Excel软件的统计和公式功能进行计算,并用图表形式直观进行表达。该方法公式性强,设计方案改变时,只需改变较少的数据,便能得到想要的结果,可避免重复计算,大大提高设计计算的效率。
|
| 关 键 词： | 接地开关 转动惯量 数据采集 合闸功 刚合 |
Parametric Design of Grounding Switch Based on UG and Excel |
| |
| ZHAO Fei,DAI Daoli,LU.Parametric Design of Grounding Switch Based on UG and Excel[J].High Voltage Apparatus,2019,55(10):101-104,110. |
| |
| Authors: | ZHAO Fei DAI Daoli LU |
| |
| Affiliation: | (Shanghai Electric Appliance Science Research Institute (Group) Co.,Ltd.,Shanghai 200063,China) |
| |
| Abstract: | This parametric design method of grounding switch is a comprehensive design method. For the data that have to be calculated through complex formula, the UG NX8.0 software is used to obtain them by its analysis function (Other software of the same kind also has the similar function). The statistical function and formulas of the software Excel are used for calculation, and the chart form is used for intuitive expression. This method has of strong function of formula, so for design change only a small amount of data need to be changed to get the desired result. Hence, repeated calculation is avoided and the efficiency of design calculation is greatly improved. |
| |
| Keywords: | earth switch rotary inertia data acquisition switching work just close |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
