| 无凸缘深圆筒件复合模设计 |
| |
| 引用本文： | 林章辉.无凸缘深圆筒件复合模设计[J].锻压装备与制造技术,2009,44(4):84-86. |
| |
| 作者姓名： | 林章辉 |
| |
| 作者单位： | 长沙航空职业技术学院,湖南长沙,410124 |
| |
| 摘 要： | 深圆筒件的拉深模是冲压模具中设计的一个难点,关键在如何确定拉深次数。拉深次数过多,增加生产成本;拉深次数过少,容易出现许多质量问题。本文专门针对这类深圆筒件,系统地分析了其拉深工艺,介绍了模具的设计。
|
| 关 键 词： | 机械制造 复合模 拉深 圆筒件 |
The Design of Composite Die for Deep Cylindrical Pieces without Flange |
| |
| LIN Zhanghui.The Design of Composite Die for Deep Cylindrical Pieces without Flange[J].China Metalforming Equipment & Manufacturing Technology,2009,44(4):84-86. |
| |
| Authors: | LIN Zhanghui |
| |
| Affiliation: | The Vocational & Technical College of Changsha Aviation;Changsha 410124;Hunan China |
| |
| Abstract: | The drawing die is difficult to design for the deep cylindrical pieces,of which the key problem is the way to determine the quantity of drawing. The larger drawing quantity causes big cost,while the smaller produces bad quality. Aiming at this kind of deep cylindrical pieces,the drawing technical process has been analyzed in the text,and the die has been designed. |
| |
| Keywords: | Composite die Drawing Cylinder piece |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
