| 新型两板式注塑机拉杆抱闸螺纹的设计与分析 |
| |
| 引用本文： | 曹飞祥. 新型两板式注塑机拉杆抱闸螺纹的设计与分析[J]. 橡塑技术与装备, 2010, 36(1): 34-37. DOI: 10.3969/J.ISSN.1009-797X.2010.01.007 |
| |
| 作者姓名： | 曹飞祥 |
| |
| 作者单位： | 福建华橡自控技术股份有限公司厦门研发中心,福建,厦门,361008 |
| |
| 摘 要： | 利用ANSYS软件内嵌的APDL语言建立拉杆螺纹的接触模型,对拉杆进行接触分析。通过有限元分析得出拉杆及螺母的应力、位移分布结果。通过减小结构尺寸,比原结构节省14.9%的材料,为新产品的开发提供了技术支持。
|
| 关 键 词： | 注塑机 螺纹 有限元 接触分析 |
Design and analysis of threaded rod brake for new two-plate injection molding machine |
| |
| Cao Feixiang. Design and analysis of threaded rod brake for new two-plate injection molding machine[J]. China Rubber/Plastics Technology & Equipment, 2010, 36(1): 34-37. DOI: 10.3969/J.ISSN.1009-797X.2010.01.007 |
| |
| Authors: | Cao Feixiang |
| |
| Affiliation: | Cao Feixiang(Xiamen R & D center of Fujian Huaxiang automatic control technology co.,ltd.,Xiamen 361008,Fujian China) |
| |
| Abstract: | By APDL language embedded of ANSYS software,established rod thread contact model,and analyzed the rod contact.By finite element,analyzed the stress and displacement distribution of the rod and nut.By reducing the structure size,which is saving14.9% material than the original structure to provide technical support for the development of new products. |
| |
| Keywords: | injection molding machine thread finite element contact analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
