首页 | 本学科首页   官方微博 | 高级检索  
     

非晶态Cr-C合金镀层制备及其耐腐蚀性
引用本文:杨毕学,揭晓华,李国亮.非晶态Cr-C合金镀层制备及其耐腐蚀性[J].腐蚀与防护,2012(4):304-306,334.
作者姓名:杨毕学  揭晓华  李国亮
作者单位:广东工业大学
基金项目:广东省教育部产学研结合项目(2009B090300185)
摘    要:以酒石酸为添加剂,采用电沉积法制备了非晶态Cr-C合金镀层。用X射线衍射、扫描电子显微镜及能谱仪对镀层结构、形貌及成分进行表征,并对镀层进行电化学耐腐蚀性测试。结果表明,当酒石酸加入量为40g/L时,镀层的X射线衍射图出现非晶态的特征峰,镀层表面平整、致密,无裂纹和针孔,与普通晶态Cr镀层相比,非晶态Cr-C合金镀层具有更优良的耐腐蚀性能。

关 键 词:非晶  Cr-C合金  镀层  耐腐蚀性

Preparation and Corrosion Resistance of Amorphous Cr-C Alloy Coating
YANG Bi-xue,JIE Xiao-hua,LI Guo-liang.Preparation and Corrosion Resistance of Amorphous Cr-C Alloy Coating[J].Corrosion & Protection,2012(4):304-306,334.
Authors:YANG Bi-xue  JIE Xiao-hua  LI Guo-liang
Affiliation:(Guangdong University of Technology,Guangzhou 510006,China)
Abstract:Amorphous Cr-C alloy coating was prepared by electrodepositing in tartaric acid additive bath.The microstructure,composition and surface morphology of the coating were detected by X-ray diffraction,SEM and EDS,also the microhardness,electrochemical corrosion resistance of the coating were tested.The results showed that a broad diffraction peak appeared on the X-ray diffraction pattern,the coating had a smooth and dense surface without pinhole and crack when the dosage of tartaric acid was 40 g/L.Compared with conventional crystalline Cr coating,amorphous Cr-C alloy coating had better corrosion resistance.
Keywords:amorphous  Cr-C alloy  coating  corrosion resistance
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号