| 1Cr18Ni9Ti车削加工工艺改进 |
| |
| 引用本文： | 钱利霞,赵万军. 1Cr18Ni9Ti车削加工工艺改进[J]. 煤矿机械, 2006, 27(4): 637-639 |
| |
| 作者姓名： | 钱利霞 赵万军 |
| |
| 作者单位： | 重庆三峡学院,重庆,404000;重庆三峡学院,重庆,404000 |
| |
| 摘 要： | 针对1Cr18Ni9Ti在切削过程中加工硬化严重、切削力大、切削温度高和切屑不易折断等原因造成的切削性能较差的特点。通过热处理以改善材料的组织,合理选择刀具材料、几何参数、切削用量和切削液等,以改进1Cr18Ni9Ti的车削加工工艺。获得了理想的切削效果,大大降低生产成本,提高了生产效率。
|
| 关 键 词： | 1Cr18Ni9Ti 切削 刀具 工艺 |
| 文章编号： | 1003-0794（2006）04-0637-03 |
| 收稿时间： | 2006-01-01 |
| 修稿时间： | 2006-01-01 |
Improving Program about Turning Machining Technology of 1Cr18Ni9Ti |
| |
| QIAN Li-xia,ZHAO Wan-jun. Improving Program about Turning Machining Technology of 1Cr18Ni9Ti[J]. Coal Mine Machinery, 2006, 27(4): 637-639 |
| |
| Authors: | QIAN Li-xia ZHAO Wan-jun |
| |
| Affiliation: | Chongqing Three Gores University,Chongqing 404000, China |
| |
| Abstract: | The cutting character lost greatly due to over- work hardening, heavy cutting force, high temperature and scraps not- easy- breaks- off in the cutting process of 1Cr18Ni9Ti. The better turning performance with low production cost and high production efficiency has been achieved by improving the production technology of 1Cr18Ni9Ti utilizing a series of methods, such as heating treatment to gain better material structure, and choosing suitable cutting tools, geometry parameters, cutting amouts and cutting fluid for cutting tools. |
| |
| Keywords: | 1Cr18Ni9Ti |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
