首页 | 本学科首页   官方微博 | 高级检索  
     

结晶器保护渣对超低碳钢连铸坯表面渗碳的影响
引用本文:刘承军,姜茂发,于景坤. 结晶器保护渣对超低碳钢连铸坯表面渗碳的影响[J]. 特殊钢, 2002, 23(5): 9-11
作者姓名:刘承军  姜茂发  于景坤
作者单位:东北大学材料与冶金学院,沈阳110004
摘    要:通过超低碳钢渗碳的理论解析和实验测定,研究连铸保护渣对超低碳钢铸坯表面渗碳的影响。在稳态浇注条件下,超低碳钢铸坯表面渗碳量和渗碳深度很小;在非稳态浇注时期,超低碳钢铸坯表面渗碳量和渗碳深度很大。保护渣中含石墨的连铸坯表面渗碳量和渗碳深度最大,碳黑次之,活性炭最小。

关 键 词:结晶器 保护渣 超低碳钢 连铸坯 表面渗碳

Effect of Mould Shielded Fluxes on Concasting Billet Surface Carbonization of Ultra-Low-Carbon Steel
Liu Chengjun,Jiang Maofa and Yu Jingkun. Effect of Mould Shielded Fluxes on Concasting Billet Surface Carbonization of Ultra-Low-Carbon Steel[J]. Special Steel, 2002, 23(5): 9-11
Authors:Liu Chengjun  Jiang Maofa  Yu Jingkun
Abstract:Based on theoretical and experimental measureme nt of ultra-low-carbon (ULC) steel carbonization, the effect of concasting mould shielded fluxes on billet surface carbonization of the ULC steel has been studied. It was obtained that at normally stabilized concasting condition, the carburized amount and depth of concasting billet surface of ULC steel were not appreciable; and they were appreciable at abnormal concasting condition. With containing graphite in shielded flux, the carburized amount and depth of concasting billet surface were largest, with containing carbon black, took the next, and with containing active carbon, they were the least.
Keywords:Surface Carbonization   Concasting Billet   Mould Shielded Fluxes   Ultra-Low-Carbon Steel
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号