| Abstract: | Optimal temperature profiles for nylon 6 polymerization in plug-flow reactors have been obtained under different conditions using a reasonable objective function which gives more flexibility to a designer than those studied earlier. Computations suggest that the temperatures at the feed end of the reactor must be maintained at the highest permissible level (determined by the boiling point of the ?-caprolactam) so as to force the degree of polymerization rapidly to the desired value. Thereafter, the temperatures should be reduced in order to minimize the undesirable cyclic dimer concentration, and, finally, near the exit of the reactor, the temperature must once again be increased in order to attain higher monomer conversion. The effect of a systematic change of values of the various design variables, one by one, is studied. The profile obtained differs substantially from those obtained by earlier workers because of the difference in the objective function as well as in the kinetic mechanism associated with the formation of the cyclic oligomer. Attempts are also made to obtain a global optimal scheme to produce a polymer of a desired degree of polymerization. |
