Dielectric properties of epoxy/graphite flakes composites: Influence of loading and surface treatment

Epoxy-rich carbon-based composites are well recognized materials in industries owing to their good mechanical properties and thermal stability. Here, dielectric properties of composites based on bisphenol-A-epoxy resin loaded with 5, 6, 10, and 15 wt% of graphite flakes (GF) have been studied. The frequency and temperature dependence of the dielectric permittivity, dielectric loss, and ac conductivity have been examined in temperature (−103 to 97°C) and frequency (20 Hz–200 kHz) range. Influence of the filler surface chemistry have been studied for composites loaded with 5 wt% GF obtained: (i) under wet milling, without or with adding Triton-100x as a surfactant, or (ii) under dry milling in the presence of KOH. The composite made of epoxy loaded with 5 wt% exfoliated expanded graphite flakes (EEG), was also prepared. The surface treatment with KOH notably increased dielectric constant of the composite, keeping low dielectric loss, while treatment with Triton-100x significantly increased tanδ. The composite loaded with exfoliated expanded graphite shows higher ac conductivity than those obtained with flaky graphite, GF. Possibility to change dielectric properties of the composites without changing the loading content can be used as an approach in tailoring one with desired dielectric properties.