| 汽车覆盖件模具结构的模板化设计 |
| |
| 引用本文： | 杨玉英,石磊,苏越. 汽车覆盖件模具结构的模板化设计[J]. 中国机械工程, 2004, 15(10): 902-904 |
| |
| 作者姓名： | 杨玉英 石磊 苏越 |
| |
| 作者单位： | 1. 哈尔滨工业大学材料科学与工程学院,哈尔滨,150001
2. 天津汽车模具有限公司,天津,300401 |
| |
| 摘 要： | 引进模板化、积木式设计思想，在UG平台的基础上开发了覆盖件模具结构设计cAD系统的模板库，并建立了包含标准件和标准结构的素材库，实现了模具结构的模板化设计。通过对某车型机罩外板拉延模结构设计的实际应用，证明模板化技术可简化设计过程．提高设计效率，加强模具设计的标准化程度。
|
| 关 键 词： | 模板库 标准化 结构设计 汽车覆盖件模具 |
| 文章编号： | 1004-132X(2004)10-0902-03 |
Templet Design of Die Structure of Auto Panel |
| |
| Yang Yuying Shi Lei Su Yue . Harbin Institute of Technology,Harbin, . Tianjin Motor Dies Co.Ltd.,Tianjin. Templet Design of Die Structure of Auto Panel[J]. China Mechanical Engineering, 2004, 15(10): 902-904 |
| |
| Authors: | Yang Yuying Shi Lei Su Yue . Harbin Institute of Technology Harbin . Tianjin Motor Dies Co.Ltd. Tianjin |
| |
| Affiliation: | Yang Yuying 1 Shi Lei 1 Su Yue 2 1. Harbin Institute of Technology,Harbin,15001 2. Tianjin Motor Dies Co.Ltd.,Tianjin,300401 |
| |
| Abstract: | The design thought of templet and modular was adopted to strengthen the standardization of structural designs of auto panel dies. A templet base of structure CAD system of auto panel dies was developed on UG software platform. At the same time, the standard part base and standard structure base were created too. Through a real design for an engine covering by the system, it is proved that the efficiency and the standardization degree of die structural design are improved greatly. |
| |
| Keywords: | templet-base standardization structure design automobile panel die |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
