|
|||||
|
|
| 双圆弧弧齿锥齿轮齿根应力沿齿长分布的研究 | |
| 引用本文： | 张秀亲,李瑞斌,许恒伟. 双圆弧弧齿锥齿轮齿根应力沿齿长分布的研究[J]. 工程设计学报, 2002, 9(4): 215-218 |
| 作者姓名： | 张秀亲 李瑞斌 许恒伟 |
| 作者单位： | 1. 太原理工大学,阳泉学院,山西,阳泉,045001 2. 太原理工大学,机械工程学院,山西,太原,030024 |
| 摘 要： | 用有限元方法，对双圆弧弧齿锥齿轮沿齿长方向齿根应力进行了计算． 通过应力计算结果的分析，得出了凸、凹两齿侧应力沿齿长的分布规律．计算结果表明，对凹齿侧，最大应力发生在靠近小端处；对凸齿侧，最大应力发生在靠近齿长中点大端处． |
| 关 键 词： | 双圆弧弧齿锥齿轮 应力 |
| 文章编号： | 1006-754X(2002)04-0215-04 |
| 修稿时间： | 2001-12-10 |
Research on root stress of double circular arc profile spiral bevel gear along the length of the tooth |
|
| ZHANG Xiu-qin,LI Rui-bin,XU Heng-wei. Research on root stress of double circular arc profile spiral bevel gear along the length of the tooth[J]. Journal of Engineering Design, 2002, 9(4): 215-218 | |
| Authors: | ZHANG Xiu-qin LI Rui-bin XU Heng-wei |
| Affiliation: | 1．Yangquan Collge，Taiyuan University of Technology，Yangquan 045001，China； 2．College of M echanical Engineering，Taiyuan U niversity of Technology，Taiyuan 030024，China |
| Abstract: | Through the calculation of the finite element method(FEM) models for double circular arc profile spiral bevel gear, the stress changing pattern along the length of the tooth is obtained. The result indicates that the largest stress is located in the small end to concave surface gear and the largest stress is located in the center near big end to convex surface gear. |
| Keywords: | double circular arc profile spiral bevel gear stress |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《工程设计学报》浏览原始摘要信息 | |
| 点击此处可从《工程设计学报》下载免费的PDF全文 | |