| 金刚石铣刀加工花岗石磨损规律的试验研究 |
| |
| 引用本文： | 黄波,张进生,刘增文,王志,李剑峰. 金刚石铣刀加工花岗石磨损规律的试验研究[J]. 金刚石与磨料磨具工程, 2004, 0(5): 48-50 |
| |
| 作者姓名： | 黄波 张进生 刘增文 王志 李剑峰 |
| |
| 作者单位： | 山东大学机械工程学院,山东省石材工程技术研究中心,山东,济南,250061 |
| |
| 摘 要： | 本文以金刚石圆柱成形铣刀在SPEED3石材加工中心上加工花岗石台板面边缘曲线为对象进行试验，分析研究刀具宏观几何尺寸参数(直径、质量、圆柱度)的变化量与工件材质及其去除量间的关系，探询刀具磨损规律。通过利用不同构成和工艺参数的刀具加工两种花岗石的对比实验，得出了刀具几何参数与工件材料去除量关系的变化曲线。据此，可分析计算刀具直径的磨损变化规律、预测刀具寿命，并可方便地校正补偿加工中心刀具轴线的运动轨迹。
|
| 关 键 词： | 花岗石 金刚石工具 磨损 铣刀 试验 |
| 文章编号： | 1006-852X(2004)05-0048-03 |
| 修稿时间： | 2004-07-16 |
THE EXPERIMENTAL STUDY ON WEAR REGULARITY OF DIAMOND MILLSIN GRANITE CUTTING |
| |
| Huang Bo Zhang Jinsheng Liu Zengwen Wang Zhi Li Jianfeng. THE EXPERIMENTAL STUDY ON WEAR REGULARITY OF DIAMOND MILLSIN GRANITE CUTTING[J]. Diamond & Abrasives Engineering, 2004, 0(5): 48-50 |
| |
| Authors: | Huang Bo Zhang Jinsheng Liu Zengwen Wang Zhi Li Jianfeng |
| |
| Abstract: | In order to study the wear regularity and life of diamond tools, improve working efficiency and reduce the process costs, milling experiments were conducted with numerical control machine centers for hard and fragile materials named SPPEED3 from Italy to machine granite in this paper. The relationship between the change amount of macro-geometry parameters including diameter, weight and cylinder degree of shaped milling cutter and the removing amount of the workpiece material can be used to analyze the wear mechanism of shaped milling cutter. Experiments were carried out and compared by machining two kinds of granite with different mills to draw the changing curve of the diameter and determine the weight and cylinder degree of the mills. |
| |
| Keywords: | granite diamond tools wear mills test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
