首页 | 本学科首页   官方微博 | 高级检索  
     

齿轮箱固有特性数值模拟和试验研究
引用本文:陶泽光 李润方 等. 齿轮箱固有特性数值模拟和试验研究[J]. 机械科学与技术, 2001, 20(2): 278-279
作者姓名:陶泽光 李润方 等
作者单位:[1]重庆大学机械传动国家重点实验室,重庆400044 [2]重庆大学机械传动国家重点实验室,重庆4
基金项目:国家自然科学基金资助项目! (编号 5 983 5 160 )
摘    要:齿轮系统由传动系统和结构系统两部分组成 ,其中结构系统的动态性能对整个系统的影响最大。本文采用有限元方法 ,建立了实际单级齿轮减速器的齿轮箱有限元动力学模型 ,在工作站上用 I- DEAS软件研究了齿轮箱的固有特性 ,并用试验模态分析方法验证了固有频率的数值模拟结果。所得结果既反映了箱体的动力学性能 ,又为齿轮系统的动态特性分析奠定了基础。

关 键 词:齿轮  箱体  模态分析  有限元法
文章编号:1003-8728(2001)02-0278-02
修稿时间:2000-01-01

Numerical and Experimental Research on Normal Characteristics of Gear Box
TAO Ze-guang,LI Run-fang,LIN Teng-jiao. Numerical and Experimental Research on Normal Characteristics of Gear Box[J]. Mechanical Science and Technology for Aerospace Engineering, 2001, 20(2): 278-279
Authors:TAO Ze-guang  LI Run-fang  LIN Teng-jiao
Abstract:Gear system consists of transmission system and structural system. The dynamic performances of structural system, i.e. gear box, play an important role in the dynamic characteristics of gear system. The gear box is the main source of gear system noise. The dynamic model of box in a single stage reducer is established by FEM in this paper. The normal characteristics of the box are investigated by I-DEAS software and experimental modal analysis. The results show the dynamic performance of the box and lay foundation for calculation of dynamic characteristics of gear system.
Keywords:Gear box  Modal analysis  Finite element method
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号