| 不同切割压力下后混合磨料射流切割深度和速度关系的实验研究 |
| |
| 引用本文： | 周大鹏,段雄,江山.不同切割压力下后混合磨料射流切割深度和速度关系的实验研究[J].煤矿机械,2013,34(5):94-96. |
| |
| 作者姓名： | 周大鹏 段雄 江山 |
| |
| 作者单位： | 1. 中国矿业大学电力学院,江苏徐州,221116
2. 浩通水射流科技有限公司,江苏徐州,221004 |
| |
| 基金项目： | 教育部科学技术研究重点项目 |
| |
| 摘 要： | 通过对后混合磨料射流产生过程的动力和能量分析,以及磨料水射流切割过程的能量转化分析。得出了后混合磨料射流切割过程中切割深度和速度的乘积与切割压力的关系。并通过对304不锈钢的切割实验验证了上述理论。同时通过实验确定了后混合磨料射流切割304不锈钢时切割深度和速度与切割压力的关系的定量关系,建立了切割压力、切割速度和切割深度的关系模型。
|
| 关 键 词： | 后混合 磨料 水射流 切割 |
Relationship of Cutting Speech and Cutting Depth of Abrasive Water Jet: Experimental Study |
| |
| Abstract: | The momentum and energy of the abrasive water jet during its formation is analyzed,and also the transformation and transportation of the cutting process.In abrasive water jet cutting process,the relationship of cutting pressure and the product of the cutting speech and cutting depth is concluded.And it is verified with the 304 stainless steel cutting experiments.Especially,the quantitative relationship of the 304 stainless steel is found in the experiment.And the mathematical model of the quantitative relationship is established. |
| |
| Keywords: | mixed abrasive water jet cutting |
| 本文献已被 万方数据 等数据库收录！ |
|
