首页 | 本学科首页   官方微博 | 高级检索  
     

新型Cu/Cr2Nb真空断路器触头材料的制备与性能研究
引用本文:鲁世强,胡春文,王克鲁,李鑫,董显娟,贺跃辉.新型Cu/Cr2Nb真空断路器触头材料的制备与性能研究[J].粉末冶金技术,2007,25(2):109-113.
作者姓名:鲁世强  胡春文  王克鲁  李鑫  董显娟  贺跃辉
作者单位:1. 南昌航空工业学院材料学院,南昌,330063
2. 中南大学粉末冶金国家重点实验室,长沙,410083
基金项目:江西省自然科学基金 , 江西省材料科学与工程中心资助项目 , 航空基础科学基金 , 江西省教育厅科研项目
摘    要:以Cu粉和Cr2Nb粉为原材料,分别采用真空烧结和真空热压工艺制备新型Cu/Cr2Nb触头材料.研究了制备工艺、材料成分对Cu/Cr2Nb触头材料的组织和性能的影响规律.结果表明,采用一般烧结工艺难以制备出致密度高的Cu/Cr2Nb材料,而采用热压工艺不仅可制备出致密度高的Cu/Cr2Nb材料,而且与CuCr50触头材料相比,在硬度相当的前提下,Cu/Cr2Nb材料的导电性能显著提高.

关 键 词:Cu/Cr2Nb触头材料  烧结和热压  组织与性能
收稿时间:2006-04-03
修稿时间:2006年4月3日

Fabrication and properties of new-type Cu/Cr2Nb contact materials for vacuum switching mechanism
Lu Shiqiang,Hu Chunwen,Wang Kelu,Li Xin,Dong Xianjuan,He Yuehui.Fabrication and properties of new-type Cu/Cr2Nb contact materials for vacuum switching mechanism[J].Powder Metallurgy Technology,2007,25(2):109-113.
Authors:Lu Shiqiang  Hu Chunwen  Wang Kelu  Li Xin  Dong Xianjuan  He Yuehui
Affiliation:School of Material Science and Engineering, Nanehang Institute of Aeronautical Technology, Nanehang 330063, China; State Key Laboratory for Powder Metallurgy, Central South Univesity, Changsha 410083, China
Abstract:The new- type Cu/Cr2Nb contact materials were fabricated from the mixture of Cu and Cr2Nb powders by the vacuum sintering and hot - pressing, respectively. The effects of fabrication processes and composition on the microstructures and properties were investigated. The results show that the Cu/Cr2Nb materials with high relative density are difficult to be obtained by the pressureless sintering, the Cu/Cr2Nb materials with high relative density can be fabricated by hot - pressing, compared with CuCr50 contact materials, the conductive behaviours of the hot - pressed Cu/Cr2Nb materials are greatly improved under the condition of the hardness of both materials being comparable.
Keywords:Cu/Cr2Nb contact materials  aintering and hot- pressing  microstructures and properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号