| 橡胶密封圈硫化模复合电镀Ni-PTFE的研究 |
| |
| 引用本文： | 吴昊,叶斌,刘定福. 橡胶密封圈硫化模复合电镀Ni-PTFE的研究[J]. 电镀与涂饰, 1998, 0(1) |
| |
| 作者姓名： | 吴昊 叶斌 刘定福 |
| |
| 作者单位： | 华南理工大学工控系防腐研究室!510641 |
| |
| 摘 要： | 优选出一种Ni—PTFE复合电镀工艺，研究了搅拌及阳离子表面活性剂对镀层PTFE含量的影响。提出了通过接触角的测量以确定镀层中PTFE含量的方法，并叙述了复合镀层在橡胶密封圈硫化模上的应用。
|
Composite Ni-PTFE Electroplating on Vulcanized Mould of Rubber Gasket |
| |
| WU Hao, YE Bin, LIU Dingfurs. Composite Ni-PTFE Electroplating on Vulcanized Mould of Rubber Gasket[J]. Electroplating & Finishing, 1998, 0(1) |
| |
| Authors: | WU Hao YE Bin LIU Dingfurs |
| |
| Affiliation: | WU Hao; YE Bin; LIU Dingfurs |
| |
| Abstract: | A composite Ni-PTFE electroplating proccss. Influences of agitation, ionicsurfactant on PTFE content of deposit which could be determined with the method of contact anglewere investigated . Application of Ni-PTFE deposit in vulcanized mould of rubber gasket also in troduced. |
| |
| Keywords: | Ni-PTFE composite plating contact angle |
| 本文献已被 CNKI 等数据库收录！ |
