首页 | 本学科首页   官方微博 | 高级检索  
     

基于MATLAB/Simulink的振动主动控制系统仿真
引用本文:曾威,刘亚平,侯锁霞,叶红玲. 基于MATLAB/Simulink的振动主动控制系统仿真[J]. 北京工业大学学报, 2006, 0(Z1)
作者姓名:曾威  刘亚平  侯锁霞  叶红玲
作者单位:中国北车集团北京二七机车厂 北京100072(曾威),河北承德钢铁有限公司 河北承德067002(刘亚平),河北理工大学机械工程学院 河北唐山063009(侯锁霞),北京工业大学机械工程与应用电子技术学院 北京100022(叶红玲)
摘    要:针对干扰力作用下的隔振系统,在振动控制过程中,根据检测到的振动信号,用Simulink软件包对隔振系统建立数学模型并进行系统性能仿真.对其仿真结果在时域和频域方面进行了分析,然后应用一定的控制策略经过实时计算,通过驱动作动器对控制目标施加一定的影响,达到抑制或消除振动的目的.经过分析比较,验证了最优控制的正确性及有效性.借助于MATLAB的控制箱及其有关命令,使设计与仿真的过程变得十分简单.

关 键 词:最优控制  线性二次型调节器  计算机仿真

Simulation of Active Vibration Control System on MATLAB/Simulink
ZENG Wei,LIU Ya-ping,HOU Suo-xia,YE Hong-ling. Simulation of Active Vibration Control System on MATLAB/Simulink[J]. Journal of Beijing Polytechnic University, 2006, 0(Z1)
Authors:ZENG Wei  LIU Ya-ping  HOU Suo-xia  YE Hong-ling
Abstract:Aiming at the isolation system under interference actions, during the vibration control process, according to the examined vibration signals, the software package of Simulink was used to establish a mathematics model to the isolation system and to carry out simulation to the functions of the system, and to analyze the simulation result in both time area and frequency area. Then, by applying a certain control strategy and realtime calculation, driving the displacement actuator to apply certain influence to the control target, to attain the objective of restraining or eliminating vibration. Through analysis and comparison, the accuracy and effectiveness of the optimum control was verified. With the help of the MATLAB of the control cabinet and its instructions, the design and imitation process became very simple.
Keywords:optimal control  linear quadratic regulator  computer simulation
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号