首页 | 本学科首页   官方微博 | 高级检索  
     

MgO-TiO_2-La_2O_3系氧化铝陶瓷的力学性能及物相分析
引用本文:周新星,田修营,何文,张旭东.MgO-TiO_2-La_2O_3系氧化铝陶瓷的力学性能及物相分析[J].山东陶瓷,2012,35(3):16-19.
作者姓名:周新星  田修营  何文  张旭东
作者单位:1. 湖南人文科技学院,化学与材料科学系,娄底417000
2. 山东轻工业学院,山东省玻璃与陶瓷材料重点实验室,济南250353
摘    要:采用MgO-TiO2-La2O3为烧结助剂,利用低温烧结技术制备95氧化铝瓷。研究了烧成温度和助剂含量对氧化铝陶瓷力学性能及物相组成的影响。结果表明:在MgO含量为1.5wt%,TiO2为1.0wt%,La2O3为2.5wt%,1500℃保温2h可得到抗弯强度和硬度分别为348.94MPa和79.6HRA的氧化铝陶瓷。

关 键 词:MgO-TiO-LaO系  低温烧结  力学性能  物相

Mechanical Properties and Phase Analysis of MgO-TiO2-La2O3 System Al2O3 Ceramic
Zhou Xin-xing,Tian Xiu-ying,He Wen,Zhang Xu-dong.Mechanical Properties and Phase Analysis of MgO-TiO2-La2O3 System Al2O3 Ceramic[J].Shandong Ceramics,2012,35(3):16-19.
Authors:Zhou Xin-xing  Tian Xiu-ying  He Wen  Zhang Xu-dong
Affiliation:1Department of Chemistry and Materials Science,Hunan University of Humanities, Science and Technology,Loudi 417000 2Key Lab of Glass & Ceramic Materials of Shandong Province, Shandong Polytechnic University,Jinan 250353)
Abstract:Using MgO-TiO2-La2O3 sintering additives,95 alumina ceramics are prepared by the low-temperature sintering technology.We investigate that temperature and additive content have an important effect on the mechanical properties of alumina ceramic sintering and carry on phase analysis.The results showed that when MgO content is 1.5wt%,TiO2 for 1.0wt% and La2O3 for2.5wt% for alumina ceramic at 1500℃ for 2h,flexural strength and hardness are 348.94 MPa and 79.6HRA.
Keywords:MgO-TiO2-La2O3 System  Low Temperature Sintering  Mechanical Properties  Phase
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号