Prediction of ductile fracture initiation using micromechanical analysis

In the paper ductile fracture initiation analysis of low-alloyed ferritic steel has been made by application of two micromechanical models: the Rice–Tracey void growth model and the Gurson–Tvergaard–Needleman (GTN) model. The aim of the study was to analyse transferability of micromechanical parameters determined on specimens without initial crack to pre-cracked specimens. A significant part of the research has been carried out through participation in the round robin project organised by the European Structural Integrity Society (ESIS). Tensile tests have been performed on cylindrical smooth specimens and CT specimens. Critical values of micromechanical parameters determined on smooth specimen for both applied models, have been used for prediction of the crack growth initiation in CT specimen. Modelling of the first phase of ductile fracture––void nucleation––has been carried out using quantitative metallographic analysis of non-metallic inclusion content in tested steel. For determination of critical values of model parameters corresponding to ductile fracture initiation a simple procedure has been applied based on a combination of experimental and numerical results. Evaluated J-integral values corresponding to onset of crack growth, J_i, are in good agreement with experimental result and both models have proved to be suitable for determination of the ductile fracture initiation in tested steel. The effect of FE size at a crack tip on J_i-value has been particularly analysed: it has been established that the calculation with FE size corresponding to the mean free path λ between inclusions in steel gives results that are in accordance with the experimental ones.