| 兼顾板形的热连轧机负荷分配的优化 |
| |
| 引用本文： | 罗永军, 王长松, 曹建国, 金丽娜, 姚耕耘. 兼顾板形的热连轧机负荷分配的优化[J]. 工程科学学报, 2005, 27(1): 94-97. DOI: 10.13374/j.issn1001-053x.2005.01.024 |
| |
| 作者姓名： | 罗永军 王长松 曹建国 金丽娜 姚耕耘 |
| |
| 作者单位： | 中国冶金设备总公司,北京,100016;北京科技大学机械工程学院,北京,100083 |
| |
| 基金项目： | 国家自然科学基金;国家科技攻关计划 |
| |
| 摘 要： | 针对热连轧过程中板形板厚综合控制问题,提出了兼顾板形的负荷分配方法,并且使用免疫遗传算法进行了参数优化.实验数据对比分析表明,该方法是有效的,能够实现板形板厚的综合控制.
|
| 关 键 词： | 负荷分配 板形板厚 热连轧 免疫遗传算法 |
| 收稿时间： | 2004-03-29 |
| 修稿时间： | 2004-09-15 |
Load distribution optimization helpful to shape control of hot strip mills |
| |
| LUO Yongjun, WANG Zhangsong, CAO Jianguo, JIN Lina, YAO Gengyun. Load distribution optimization helpful to shape control of hot strip mills[J]. Chinese Journal of Engineering, 2005, 27(1): 94-97. DOI: 10.13374/j.issn1001-053x.2005.01.024 |
| |
| Authors: | LUO Yongjun WANG Zhangsong CAO Jianguo JIN Lina YAO Gengyun |
| |
| Abstract: | The integrated control of gauge and shape in hot strip mills is important and difficult. Rolling force is the key factor of gauge control, also is one of the major factors of shape control. A strategy was introduced to optimize the load distribution helpful to shape control and the relative parameters were obtained by means of immune genetic algorithm. Experimental results show that the strategy is valid, which provides another way for the integrated control of gauge and shape and can be used to guide production in practice. |
| |
| Keywords: | load distribution gauge and shape hot strip mills immune genetic algorithm |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
