| 可燃生活垃圾气化Ca-Fe复合金属氧化物的原位固硫性能 |
| |
| 引用本文： | 刘洋,黄亚继,董新新,丁雪宇,杨晓域,王新宇,张臻荣,曹歌瀚,李志远,田新启.可燃生活垃圾气化Ca-Fe复合金属氧化物的原位固硫性能[J].化工进展,2022,41(10):5677-5684. |
| |
| 作者姓名： | 刘洋 黄亚继 董新新 丁雪宇 杨晓域 王新宇 张臻荣 曹歌瀚 李志远 田新启 |
| |
| 作者单位： | 东南大学能源热转换及其过程测控教育部重点实验室，江苏 南京 210096 |
| |
| 基金项目： | 国家重点研发计划(2019YFC1906803) |
| |
| 摘 要： | 气化技术可有效缓解因可燃生活垃圾产量不断增加而衍生的环境问题，但仍需要对气化产生的H2S和SO2进行脱除以降低硫污染物排放风险。可燃生活垃圾组成的复杂性决定了需要开发适宜的双效固硫剂以对H2S和SO2一步脱除。原位固硫指将气化原料与固硫剂预先混合，气化与硫脱除同时进行且硫污染物被固定于灰渣中。本文使用聚苯乙烯颗粒、木屑等典型组分配制可燃生活垃圾作为气化原料，以CO2为气化剂，采用球磨法制备了一系列Ca-Fe复合金属氧化物作为固硫剂并对其原位固硫性能进行了研究。结果表明，在600℃气化温度下，Ca-Fe复合金属氧化物中的CaO/Fe2O3比例对固硫率产生影响，且两者质量比为1∶1时固硫性能最佳，固硫率可达82.65%。作为对比，CaO和Fe2O3单一组分固硫率仅分别为65.57%和74.12%。BET、SEM等分析表明CaO、Fe2O3球磨形成复合金属氧化物时产生相互作用并影响粒径分布、孔径、比表面积等物化性质，且能够改善固硫剂的烧结现象，质量比为1∶1时综合作用效果最优。
|
| 关 键 词： | 生活垃圾 气化 原位固硫 复合金属氧化物 球磨法 |
| 收稿时间： | 2022-01-04 |
In-situ sulfur fixation performance of Ca-Fe composite metal oxides during gasification of combustible municipal solid waste |
| |
| LIU Yang,HUANG Yaji,DONG Xinxin,DING Xueyu,YANG Xiaoyu,WANG Xinyu,ZHANG Zhenrong,CAO Gehan,LI Zhiyuan,TIAN Xinqi.In-situ sulfur fixation performance of Ca-Fe composite metal oxides during gasification of combustible municipal solid waste[J].Chemical Industry and Engineering Progress,2022,41(10):5677-5684. |
| |
| Authors: | LIU Yang HUANG Yaji DONG Xinxin DING Xueyu YANG Xiaoyu WANG Xinyu ZHANG Zhenrong CAO Gehan LI Zhiyuan TIAN Xinqi |
| |
| Affiliation: | Key Laboratory of Energy Thermal Conversion and Control of the Ministry of Education, Southeast University, Nanjing 210096, Jiangsu, China |
| |
| Abstract: | Gasification technology can effectively alleviate the environmental threat caused by the increasing combustible municipal solid waste, but the H2S and SO2 produced by gasification still need to be removed to reduce the sulfur emission. The complex composition of combustible municipal solid waste requires suitable sulfur fixation reagent to remove H2S and SO2 simultaneously. In-situ sulfur fixation refers to the co-occurrence of gasification and sulfur removal after premixing raw materials and sulfur fixation reagent, and the sulfur pollutants are fixed in the ash. In this work, the typical components such as polystyrene particles and sawdust were mixed to simulate the combustible municipal solid waste and CO2 was used as gasification agent. A series of Ca-Fe composite metal oxides were prepared by ball milling method and their in-situ sulfur fixation performance were further studied. The results showed that at 600℃, CaO/Fe2O3 mass ratio in Ca-Fe composite metal oxides has affected on the sulfur fixation rate. The sulfur fixation rate reached 82.65% when 1∶1 Ca-Fe composite metal oxides were used, better than other CaO/Fe2O3 mass ratios. In contrast, the sulfur fixation rates of using CaO and Fe2O3 solely were only 65.57% and 74.12% respectively. BET and SEM analysis showed the interactions between CaO and Fe2O3 during the composite metal oxides formation by ball milling, which affected the physico-chemical properties such as particle size distribution (PSD), pore size and specific surface area. Besides, the sintering phenomenon was much alleviated. Therefore, the best comprehensive performance was for the CaO/Fe2O3 mass ratio of 1∶1. |
| |
| Keywords: | municipal solid waste gasification in-situ sulfur fixation composite metal oxide ball milling method |
|
| 点击此处可从《化工进展》浏览原始摘要信息 |
|
点击此处可从《化工进展》下载全文 |
|
