Mechanical and Morphological Properties of Polypropylene and Regenerated Tire-Rubber Blends

Mechanical properties and morphology of blends prepared from polypropylene (PP) and 5–20 wt% of regenerated tire-rubber (RgR) were studied. The samples were prepared in a twin-screw extruder. The addition of maleic anhydride-functionalized polypropylene (PP-g-MAH) was also investigated. Tensile and flexural moduli, tensile strength at break, elongation at break and Izod impact resistance at 23°C were increased by the addition of 15 wt% of regenerated rubber and 5 wt% of PP-g-MAH. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) analyses showed some interaction between PP and RgR and considerable modification of the compatibilized mixture morphology. The fracture surface of the blend with PP-g-MAH showed a better interaction between the PP matrix and the regenerated rubber domains, for all blends. Well-dispersed particles of the rubber in the polypropylene matrix were observed. DSC showed that PP crystallizes on cooling at lower temperatures as the RgR content increases. The decrease in crystallization temperature is more evident for blends with 5 wt% PP-g-MAH.     

Structure and properties of polypropylene-based nanocomposites: Effect of PP-g-MA to organoclay ratio

The structure-property relationships of polypropylene (PP)-based nanocomposites prepared by melt processing have been investigated with a main focus on the ratio of polypropylene grafted with maleic anhydride (PP-g-MA) to organoclay. The morphological observations by transmission electron microscopy and X-ray diffraction are presented in conjunction with the mechanical, rheological and thermal expansion properties of these nanocomposites. Detailed morphological studies and subsequent quantitative particle analyses for the dispersed clay phase reveal that the aspect ratio of clay particles decreases as the amount of clay increases, and it increases as the amount of PP-g-MA increases. The rheological properties suggest that the extent of a percolation network can be enhanced by increasing the number of organoclay particles at a fixed ratio of PP-g-MA to organoclay and by increasing the degree of exfoliation at fixed clay content. However, mechanical and thermal expansion behaviors do not improve correspondingly in all cases because of the reduction of matrix properties by PP-g-MA. The reduction of the modulus and the increase in the expansion of the polymer matrix caused by the presence of PP-g-MA are compared to the prediction of the Chow model. Clearly, the amount of PP-g-MA added along with its lower crystallinity are important factors affecting the mechanical and thermal expansion properties of PP-based nanocomposites.     

Crystallization behavior of polypropylene/polyamide 6/montmorillonite nanocomposites

Polymer blended materials such as polyamide 6 (PA6)/polypropylene (PP) blends have received considerable attention in recent years. To improve the compatibility of PA6 and PP, compatibilizers like maleic anhydride‐g‐polypropylene (MPP) are often added. In addition, organically modified montmorillonite (MMT) is also used to improve the properties of various materials. In this work, the crystallization behavior of PP/PA6/MMT nanocomposites with MPP compatibilizer was investigated systematically. The annealing process effectively improved the crystallization of α‐PP. The crystallization temperature (T_c) of PA6 was increased by ca 2–3 °C on introducing MPP or MMT alone to the PP/PA6 system, whereas T_c of PP underwent no obvious change. However, when MPP and MMT were added simultaneously, T_c of PP and PA6 increased by 6.6 and 4.2 °C, respectively, and a new crystallization peak corresponding to PP‐g‐PA6 copolymer phase was observed at 162.5 °C. The combined effect of MPP and MMT led to better compatibility of PP with PA6. Moreover, the results of a non‐isothermal crystallization kinetics experiment revealed that the simultaneous introduction of MPP and MMT markedly shortened the crystallization time. Copyright © 2010 Society of Chemical Industry     

Dispersion of nanoclay into polypropylene with carbon dioxide in the presence of maleated polypropylene

The effect of maleic anhydride grafted polypropylene (PP-g-MA) on the mechanical and rheological properties of polypropylene (PP)–clay nanocomposites prepared with nanoclay expanded with CO₂ and direct melt blending was studied. The results from the studies of the mechanical properties, rheological properties, and transmission electron microscopy show that when PP-g-MA was combined with the technique that used CO₂, greater enhancements in the mechanical properties and degree of dispersion of nanoclay in PP were observed. Furthermore, yieldlike behavior in the viscosity and a tail in the low-frequency behavior of the elastic modulus was attributed to the reaction of PP-g-MA with the nanoclay surface and not exfoliation. A fairly well-dispersed morphology was observed for concentrations as high 6.8 wt % clay when the clay was expanded and mixed with CO₂. At this concentration, mechanical properties such as yield strength and modulus increased by as much as 13 and 69%, respectively, relative to the pure PP. Furthermore, the modulus of the composite samples prepared with PP-g-MA and CO₂ was some 15% higher than that of samples prepared by direct melt compounding (without the use of CO₂). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I: Morphology and mechanical properties

The structure-property relationships of thermoplastic olefin (TPO)-based nanocomposites prepared by melt processing are reported with a main focus on the ratio of maleic anhydride-grafted polypropylene (PP-g-MA) to organoclay. The morphological observations by transmission electron microscopy, atomic force microscopy, and X-ray diffraction are presented in conjunction with the mechanical and rheological properties of these nanocomposites. Detailed quantitative analyses of the dispersed clay particles revealed that the aspect ratio of clay particles decreased as clay content increased but increased as the amount of PP-g-MA increased. Analysis of the elastomer phase revealed that the aspect ratio of the elastomer phase increased in both cases. The presence of clay causes the elastomer particles to become highly elongated in shape and retards the coalescence of the elastomer particles. The modulus and yield strength are enhanced by increasing the PP-g-MA/organoclay ratios. High levels of toughness of the TPO can be maintained when moderate levels of (organoclay) MMT and PP-g-MA are used. The rheological properties suggested that the addition of clay particles and PP-g-MA has a profound influence on the long time stress relaxation of the TPO nanocomposites. Based on these analyses, it is clear that it is important to optimize the ratio of PP-g-MA and organoclay to obtain the desired balance of mechanical properties and processing characteristics for TPO nanocomposites.     

Phase behaviors of poly(oxyethylene)-grafted polypropylene copolymers

A family of amphiphilic graft copolymers were prepared from a maleated polypropylene (PP-g-MA) and various crystalline poly(oxyethylene)-segmented amines of 1000 to 3000 molecular weight. Structurally, these copolymers consist of polypropylene (PP) backbone and several crystalline poly(oxyethylene) (POE) pendants in the structure. In the observation of their phase behaviors by using a differential scanning calorimeter (DSC), the interference between the POE segments and PP backbone was found. In a particular case (PP-g-MA/ED-2001), the heat of POE crystallization did not show off in the cooling curve of the DSC, but appeared during the consecutive heating process. Generally, heating and cooling patterns of the DSC analyses showed the shifts of melting and crystallizing temperatures, depending on the length and the termini of POE, from those of the starting materials— PP-g-MA and POE amines. The TGA and optical microscopy observation further supported the DSC analyses.     

Aniline-Modified Polypropylene as a Compatibilizer in Polypropylene Carbon Nanotube Composites

Maleic anhydride-grafted polypropylene (PP-g-MA) was reacted with aniline (NH₂C₆H₅) to produce PP-g-NHC₆H₅ and used as a compatibilizer in polypropylene/carbon nanotube composites. Infrared spectroscopy (FTIR) and nuclear magnetic resonance confirmed the reaction between PP-g-MA and aniline. PP-g-NHC₆H₅ resulted a better compatibilizer than PP-g-MA, producing good dispersion and homogeneous distribution of the carbon nanotubes with less agglomerates, as observed by SEM analysis. Improved dispersion and distribution is assumed to be due to the π–π interactions between the –C₆H₅ ring in the prepared compatibilizer and the hexagonal carbon structure in the nanotubes. In addition, a higher degree of crystallinity (12%) was promoted, since it was favored by π–π interactions. This achieved higher crystallinity promoted an increase in tensile modulus, with only slight changes in tensile strength but with an adverse effect on elongation at break.     

Compatibilization effectiveness of maleated polypropylene compared to organoclay in PBT/PP blends

The compatibilization efficiency of a conventional compatibilizer (PP-grafted maleic anhydride) is compared with an organoclay of hydrophilic modifier (Cloisite 30B) in poly(butylene terephthalate)/polypropylene (PBT/PP) immiscible polymer blend. Moreover, the effect of PP-grafted maleic anhydride (PP-g-MA) on localization of Cloisite 30B organoclays is investigated, in this research. Accordingly, PBT/PP blends containing PP-g-MA, organoclay and PP-g-MA/organoclay are prepared by melt mixing method. According to morphological analysis, organoclays are more efficient than PP-g-MA in dispersion and distribution of droplets in PBT/PP blend. Additionally, the size of dispersed-droplets in PBT/PP/organoclay nanocomposite is lower than PBT/PP/PP-g-MA/organoclay sample. From X-ray diffractometry (XRD) and transmission electron microscopy illustrations, it is shown that organoclays represent the higher level of intercalation structure in PBT/PP/organoclay compared to PBT/PP/PP-g-MA/organoclay nanocomposite. PBT/PP/Organoclay nanocomposite indicates higher viscosity and elasticity in comparison with PBT/PP/PP-g-MA/organoclay, as well. The present subject can be explained by the role of PP-g-MA in transferring some parts of organoclays from PBT matrix into PP droplets which hinders the break-up of dispersed-droplets. According to non-linear viscoelastic properties, PBT/PP/organoclay sample shows stronger stress overshoots than PBT/PP/PP-g-MA/organoclay in start-up of shear flow. Modified De Kee-Turcotte model is studied to investigate the yield stress and viscoelastic behavior of different samples. PBT/PP/Organoclay nanocomposite shows higher yield stress compared to PBT/PP blend filled by PP-g-MA/organoclay system.     

Compatibility,morphology, and crystallization behavior of compatibilized β-nucleated polypropylene/poly(trimethylene terephthalate) blends

β-Nucleated polypropylene (PP), uncompatibilized β-nucleated PP/poly(trimethylene terephthalate) (PTT), β-nucleated PP/PTT blends compatibilized with maleic anhydride (MA)-grafted PP (PP-g-MA), and styrene–ethylene–propylene copolymer were prepared with a twin-screw extruder. The morphology, compatibility, crystallization characteristic, melting behavior, and crystallization kinetics were investigated. The result shows that β-nucleated PP was incompatible with PTT, and the addition of the two compatibilizers decreased the interfacial tension between β-nucleated PP and PTT; this led to improved dispersion and strengthened interfacial bonding in the blends. PP-g-MA had a better compatibilization effect. All of the researched β-nucleated PP/PTT blends contained β crystals of PP, and the compatibilizers exhibited synergistic effects with the β-nucleating agent to further increase the content of β crystals. Nonisothermal kinetic analysis indicated that Mo's method described the nonisothermal crystallization behavior of the β-nucleated PP/PTT blends satisfactorily, and the Avrami approach could only describe the early stage of the crystallization appropriately, whereas the Ozawa method failed to have the same effect. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The physical and mechanical properties of beta‐nucleated polypropylene/montmorillonite nanocomposites

Polypropylene (PP) and polypropylene/polypropylene‐g‐maleic anhydride/ organomontmorillonite (PP/PP‐g‐MA/OMMT) nanocomposites were modified with 0.05 to 0.3% (w/w) of the aryl amide β‐nucleator to promote the formation of hexagonal crystal modification (β‐phase) during melt crystallization. The nonisothermal crystallization behavior of PP, PP/PP‐g‐MA/OMMT and β‐nucleated PP/PP‐g‐MA/OMMT nanocomposites were studied by means of differential scanning calorimetry. Structure‐property relationships of the PP nanocomposites prepared by melt compounding were mainly focused on the effect and quantity of the aryl amide nucleator. The morphological observations, obtained from scanning electron microscopy, transmission electron microscopy and X‐ray diffraction analyses are presented in conjunction with the thermal, rheological, and mechanical properties of these nanocomposites. Chemical interactions in the nanocomposites were observed by FT‐IR. It was found that the β‐crystal modification affected the thermal and mechanical properties of PP and PP/PP‐g‐MA/OMMT nanocomposites, while the PP/PP‐g‐MA/OMMT nanocomposites of the study gained both a higher impact strength (50%) and flexural modulus (30%) compared to that of the neat PP. β‐nucleation of the PP/PP‐g‐MA/OMMT nanocomposites provided a slight reduction in density and some 207% improvement in the very low tensile elongation at break at 92% beta nucleation. The crystallization peak temperature (T_cp) of the PP/PP‐g‐MA/OMMT nanocomposite was slightly higher (116°C) than the neat PP (113°C), whereas the β‐nucleation increased the crystallization temperature of the PP/PP‐g‐MA/OMMT/aryl amide to 128°C, which is of great advantage in a commercial‐scale mold processing of the nanocomposites with the resulting lower cycle times. The beta nucleation of PP nanocomposites can thus be optimized to obtain a better balance between thermal and mechanical properties. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Polypropylene‐organoclay nanocomposite: Preparation,microstructure, and mechanical properties

A series of polypropylene (PP) nanocomposites containing 2, 4, and 6 wt % of an organophilic montmorillonite clay was prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (PP‐g‐MAH) as compatibilizing agent. Microstructure characterization was performed by X‐ray diffraction analysis. Nanocomposites exhibited a 15 and 22% enhancement in tensile modulus and impact strength, respectively. The heat deflection temperature of PP nanocomposites was 36°C greater than for pure PP. Thermal and mechanical properties of nanocomposites were compared to properties of traditional PP‐talc and PP‐glass fiber composites. The results showed that the properties of nanocomposites improved compared to ordinary polypropylene composites. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Comparing the compatibility of various functionalized polypropylenes with thermoplastic polyurethane (TPU)

Three functionalized polypropylenes (PP), a maleated PP (PP-g-MA), primary amine functionalized PP (PP-g-NH₂), and secondary amine functionalized PP (PP-g-NHR), were melt blended with a thermoplastic polyurethane (TPU) at different compositions. Compatibility of each functionalized PP with TPU was compared by investigating the binary blends using rheological (mixer torques, dynamic shear rheometry), thermal (dynamic mechanical analysis), mechanical (tensile test), and morphological (scanning electron microscopy with image analysis, particle size analysis) measurements. Compatibility of the three functionalized PP's with TPU is ranked in a decreasing order as follows: PP-g-NHR≥PP-g-NH₂?PP-g-MA, which is attributed to higher reactivity of amine (primary and secondary) with urethane linkages. Accordingly, the TPU blends with the two types of amine functionalized PP's exhibited much better synergy, as reflected by much improved mechanical properties including higher tensile strength and ultimate elongation, and finer and more stable morphologies.     

Influence of the compatibilizer/nanoclay ratio on final properties of polypropylene matrix modified with montmorillonite-based organoclay

The use of nanoclays as additives for polymer matrices requires, in some cases (with non-polar matrices) the use of a compatibilizer agent which will act as a bridge or permanent buffer for nanoclay-matrix interaction. In this research, we have worked on the improvement of mechanical and thermal properties of polypropylene matrices by adding montmorillonite based nanoclays (MMT) which have been previously modified with an organic component (a quaternary ammonium salt modifier). In this particular case, we have worked on the optimization of the compatibilizer:nanoclay ratio. As a compatibilizer agent it has been used a propylene graft maleic anhydride copolymer (PP-g-MA) and the PP-g-MA:MMT ratio has varied from 0.25:1 to 4:1. Nanoclay dispersion and intercalation–exfoliation degree has been investigated by X-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Also, mechanical and thermal properties for different PP-g-MA:MMT ratios have been determined. The results show optimum dispersion and intercalation–exfoliation levels for PP-g-MA:MMT ratios close to 3:1 and 4:1 and also we can observe a slight increase in mechanical and especially in thermal properties for similar ratios.     

Polypropylene-grafted nanoparticles as a promising strategy for boosting physical properties of polypropylene-based nanocomposites

SiO₂ nanoparticles grafted to terminally hydroxylated polypropylene (PP-g-SiO₂) with different molecular weights were melt mixed with PP to prepare a series of PP/PP-g-SiO₂ nanocomposites. PP/PP-g-SiO₂ offered several advantages over pristine PP and PP/unmodified SiO₂ such as highly uniform dispersion up to 10 wt.-%, +200–400% faster crystallization and +30% increments for both the Young's modulus and the tensile strength without largely sacrificing the melt viscosity of PP. We concluded that grafted chains act as crystallization nuclei and co-crystallize with matrix chains to make PP-g-SiO₂ nanoparticles as a physical cross-linker between lamellae, while the linkage disappears in melt and grafted chains minimize the cohesive attraction between nanoparticles.     

Combination of double‐modified clay and polypropylene‐graft‐maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Double‐modified montmorillonite (MMT) was first prepared by covalent modification of MMT with 3‐aminopropyltriethoxysilane and then intercalation modification by tributyl tetradecyl phosphonium ions. The obtained double‐modified MMT was melt compounded with polypropylene (PP) to obtain nanocomposites. The dispersion of the double‐modified MMT in PP was found to be greatly improved by the addition of PP‐graft‐maleic anhydride (PP‐g‐MA) as a “compatibilizer,” whose anhydride groups can react with the amino groups on the surface of the double‐modified MMT platelets and thus improve the dispersion of MMT in PP. Fourier transform infrared, X‐ray diffraction, transmission electron microscopy, thermogravimetric analysis, scanning electron microscopy, and tensile test were used to characterize the structure of the double‐modified MMT, morphology, and the thermal and mechanical properties of the nanocomposites. The results show that PP‐g‐MA promotes the formation of exfoliated/intercalated morphology and obviously increases the thermal properties, tensile strength, and Young's modulus of the PP/double‐modified MMT nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Morphology and properties of polypropylene nanocomposites based on a silanized organoclay

A silanized organoclay (s-M₂(HT)₂) was prepared by reaction of trimethoxyphenyl silane with an organoclay with a M₂(HT)₂ surfactant structure. Nanocomposites were formed from polypropylene (PP) and a blend of PP and maleic anhydride-grafted polypropylene (PP-g-MA) and the M₂(HT)₂ and s-M₂(HT)₂ organoclays by melt processing to explore the extent of exfoliation and the mechanical properties. Wide angle X-ray scattering (WAXS) and transmission electron microscopy (TEM) coupled with detailed particle analysis were used to determine the effect of the organoclay used and the PP-g-MA compatibilizer on exfoliation and mechanical, rheological, and thermal expansion properties. The PP/s-M₂(HT)₂ nanocomposites have higher particle densities than the PP/M₂(HT)₂ nanocomposites though the aspect ratio remains the same. Platelet dispersion is significantly improved by using PP-g-MA compatibilizer for both organoclays. The rheological properties and the relative modulus improve for the PP/s-M₂(HT)₂ nanocomposites but not to the same degree as either organoclay in a PP-g-MA compatibilized matrix. The thermal expansion properties, however, are not improved by using the s-M₂(HT)₂ organoclay. The s-M₂(HT)₂ organoclay is less prone to agglomeration during extrusion than the M₂(HT)₂ organoclay.     

Evaluation of polypropylene grafted with maleic anhydride and styrene as a compatibilizer for polypropylene/clay nanocomposites

Among modified Poly(propylene)s (PPs) grafted with polar monomers, PP grafted with maleic anhydride (PP-g-MAH) is known to be the most efficient compatibilizer for PP/clay nanocomposites, since it provides well-dispersed nanostructures and yields optimal physical properties of the nanocomposites. One drawback of this material, however, is that it becomes brittle and its viscosity decreases drastically, leading to nanocomposites with low toughness as the graft degree of MAH increases. Therefore, there is a limitation to increasing both stiffness and toughness of PP/clay nanocomposites with PP-g-MAH. In this study, we investigated the performance of a PP grafted with maleic anhydride and styrene (PP-g-MAH-St) as compatibilizers in PP/clay nanocomposites. It was found that the incorporation of styrene as a comonomer prevents molecular weight reduction of the PP main chain upon high loading of a radical initiator for high graft degree of MAH. The compatibilizers (PP-g-MAH-St) thus obtained show good compatibilizing performance in PP/clay nanocomposites. The PP/clay nanocomposites compatibilized by PP-g-MAH-St show both high stiffness and toughness, which is accomplished by using a compatibilizer of higher viscosity compared with PP-g-MAH.     

Effect of polymer matrix/montmorillonite compatibility on morphology and melt rheology of polypropylene nanocomposites

In this study, Ca²⁺‐montmorillonite (Ca²⁺‐MMT) and organo‐montmorillonite (OMMT) were modified by three compatibilizers with different degrees of polarity [poly(ethylene glycol) (PEG), alkyl‐PEG, and polypropylene (PP)‐g‐PEG]. PP/MMT nanocomposites were prepared by melt blending and characterized using X‐ray diffraction and transmission electron microscopy. The results showed the degree of dispersion of OMMT in the PP/PP‐g‐PEG/OMMT (PMOM) nanocomposite was considerably higher than those in the PP/PEG/OMMT and PP/alkyl‐PEG/OMMT nanocomposites, which indicated that the dispersion was relative to the compatibility between modified OMMT and PP matrix. Linear viscoelasticity of PP/MMT nanocomposites in melt states was investigated by small amplitude dynamic rheology measurements. With the addition of the modified MMT, the shear viscosities and storage modulus of all the PP/MMT nanocomposites decreased. It can be attributed to the plasticization effect of PEG segments in the three modifiers. This rheological behavior was different from most surfactant modified MMT nanocomposites which typically showed an increase in dynamic modulus and viscosity relative to the polymer matrix. The unusual rheological observations were explained in terms of the compatibility between the polymer matrix and MMT. In addition, the mechanical properties of PP/MMT nanocomposites were improved. A simultaneous increase in the tensile strength and toughness was observed in PP/PMOM nanocomposites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Water absorption behavior of different types of organophilic montmorillonite‐filled polyamide 6/polypropylene nanocomposites

The water absorption behavior of different types of organophilic montmorillonite (OMMT)‐filled polyamide 6/polypropylene nanocomposites with and without compatibilizers (maleated PP or PP‐g‐MA and maleated styrene‐ethylene/butylene‐styrene or SEBS‐g‐MA) was evaluated. Four different types of OMMT, i.e., dodecylamine‐modified MMT (D‐MMT), 12 aminolauric acid‐modified MMT (A‐MMT), stearylamine‐modified MMT (S‐MMT), and commercial organo‐MMT (C‐MMT) were used as reinforcement. The water absorption response of the nanocomposites was studied and analyzed by tensile test and morphology assessment by scanning electron microscopy (SEM). The kinetics of water absorption of the nanocomposites conforms to Fick's law. The M_m and D are dependent on the types of OMMT and compatibilizers. The equilibrium water content and diffusivity of PA6/PP blend were increased by the addition of OMMT but decreased in the presence of compatibilizers. On water absorption, both strength and stiffness of the nanocomposites were drastically decreased, but the ductility was remarkably increased. Both PP‐g‐MA and SEBS‐g‐MA played an effective role as compatibilizers for the nanocomposites. This was manifested by their higher retention ability in strength and stiffness (in the wet and re‐dried states), reduced the equilibrium water content, and diffusivity of the nanocomposites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Morphological,thermal, and mechanical properties of polypropylene/polycarbonate blend

This work deals with the effect of compatibilizer on the morphological, thermal, rheological, and mechanical properties of polypropylene/polycarbonate (PP/ PC) blends. The blends, containing between 0 to 30 vol % of polycarbonate and a compatibilizer, were prepared by means of a twin-screw extruder. The compatibilizer was produced by grafting glycidyl methacrylate (GMA) onto polypropylene in the molten state. Blend morphologies were controlled by adding PP-g-GMA as compatibilizer during melt processing, thus changing dispersion and interfacial adhesion of the polycarbonate phase. With PP-g-GMA, volume fractions increased from 2.5 to 20, and much finer dispersions of discrete polycarbonate phase with average domain sizes decreased from 35 to 3 μm were obtained. The WAXD spectra showed that the crystal structure of neat PP was different from that in blends. The DSC results suggested that the degree of crystallization of PP in blends decreased as PC content and compatibilizer increased. The mechanical properties significantly changed after addition of PP-g-GMA. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 63: 1857–1863, 1997