Synthesis and characterization of new proton conducting hybrid membranes for PEM fuel cells based on poly(vinyl alcohol) and nanoporous silica containing phenyl sulfonic acid

Organic-inorganic hybrid proton exchange membranes were prepared from poly(vinyl alcohol) (PVA) and various amounts of nanoporous silica containing phenyl sulfonic acid groups. These hybrid membranes were prepared via co-condensation of functionalized nanoporous SBA-15 (SBA-ph-SO₃H) as hydrophilic inorganic modifier, glutaraldehyde (GLA) as cross-linking agent in a PVA matrix. These membranes were characterized for their morphology, thermal stability, electrochemical and physicochemical properties using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and water uptake studies. The SBA-ph-SO₃H/PVA composite membranes have a higher water retention and thermal stability than that of Nafion 117, perhaps because of responsibility of both acidic groups and nanoporous structure of silica additive. This work demonstrates the promising potential of new composite membranes for the development of high-performance and high-stability PEM fuel cells with improved proton conductivity.     

Semi-interpenetrating network based on cross-linked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride) as proton exchange fuel cell membranes

A series of promising proton conducting membranes have been synthesized by using poly(vinyl alcohol), with sulfosuccinic acid (SSA) as a cross-linking agent and poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) as proton source, which form a semi-interpenetrating network (semi-IPN) PVA/SSA/PSSA-MA membrane. A bridge of SSA between PVA molecules not only reinforces the network but also provides extra proton conducting paths. PSSA-MA chains trapped in the network were the major sources of protons in the membrane. FT-IR spectra confirmed the success of the cross-linking reaction and molecular interactions between PVA and PSSA-MA. Associated characteristics of a proton conducting membrane including ion-exchange capacity (IEC), proton conductivity and water uptake were investigated. The measured IECs of the membranes increased with increase of PSSA-MA content varying from 20 to 80% and correlated well with the measured uptake water and proton conductivity. The semi-IPN membranes with PSSA-MA over 60% exhibited a higher proton conductivity than Nafion-115 and also a reasonable level of water uptake. Fuel cell performance of membrane electrode assemblies (MEA) was evaluated at various temperatures with H₂/air as well as H₂/O₂ gases under ambient pressure. A power density of 0.7 W cm⁻² was obtained for the MEA using PVA/SSA20/PSSA-MA80 membrane using H₂/O₂ at 50 °C.     

Phosphorylated chitosan/poly(vinyl alcohol) based proton exchange membranes modified with propylammonium nitrate ionic liquid and silica filler for fuel cell applications

In our previous work, phosphorylated chitosan was modified through polymer blending with poly(vinyl alcohol) (PVA) polymer to produce N-methylene phosphonic chitosan/poly(vinyl alcohol) (NMPC/PVA) composite membranes. The aim of this work is to further investigate the effects of a propylammonium nitrate (PAN) ionic liquid and/or silicon dioxide (SiO₂) filler on the morphology and physical properties of NMPC/PVA composite membranes. The temperature-dependent ionic conductivity of the composite membranes with various ionic liquid and filler compositions was studied by varying the loading of PAN ionic liquid and SiO₂-PAN filler in the range of 5–20 wt%. As the loading of PAN ionic liquid increased in the NMPC/PVA membrane matrix, the ionic conductivity value also increased with the highest value of 0.53 × 10^?3 S cm^?1 at 25 °C and increased to 1.54 × 10^?3 S cm^?1 at 100 °C with 20 wt% PAN. The NMPC/PVA-PAN (20 wt%) composite membrane also exhibited the highest water uptake and ion exchange capacity, with values of 60.5% and 0.60 mequiv g^?1, respectively. In addition, in the single-cell performance test, the NMPC/PVA-PAN (20 wt%) composite membrane displayed a maximum power density, which was increased by approximately 14% compared to the NMPC/PVA composite membrane with 5 wt% SiO₂-PAN. This work demonstrated that modified NMPC/PVA composite membranes with ionic liquid PAN and/or SiO₂ filler showed enhanced performance compared with unmodified NMPC/PVA composite membranes for proton exchange membrane fuel cells.     

Composite membranes based on a sulfonated poly(arylene ether sulfone) and proton-conducting hybrid silica particles for high temperature PEMFCs

The organic-inorganic composite membranes are prepared by inserting poly(styrene sulfonate)-grafted silica particles into a polymer matrix of sulfonated poly(arylene ether sulfone) copolymer. The first step consisted in using atom transfer radical polymerization method to prepare surface-modified silica particles grafted with sodium 4-styrenesulfonate, referred to as PSS-g-SiO₂. Ion exchange capacities up to 2.4 meq/g are obtained for these modified silica particles. In a second step, a sulfonated poly(arylene ether sulfone) copolymer is synthesized via nucleophilic step polymerization of sulfonated 4,4′-dichlorodiphenyl sulfone, 4,4′-dichlorodiphenyl sulfone and phenolphthalin monomers in the presence of potassium carbonate. The copolymer is blended with various amounts of silica particles to form organic-inorganic composite membranes. Esterification reaction is carried out between silica particles and the sulfonated polymer chains by thermal treatment in the presence of sodium hypophosphite, which catalyzed the esterification reaction. The water uptake, proton conductivity, and thermal decomposition temperature of the membranes are measured. All composite membranes show better water uptake and proton conductivity than the unmodified membrane. Moreover, the membranes are tested in a commercial single cell at 80 °C and 120 °C in humidified H₂/air under different relative humidity conditions. The composite membrane containing 10%(w/w) of PSS-g-SiO₂ particles, which have ester bonds between polymer chains and silica particles, showed the best performance of 690 mA cm⁻² at 0.6 V, 120 °C and 30 %RH, even higher than the commercial Nafion^® 112 membrane.     

Composite proton conducting membranes from chitosan,poly(vinyl alcohol) and sulfonic acid-functionalized silica nanoparticles

Composite proton conducting membranes were successfully synthesized from chitosan, poly (vinyl alcohol) and sulfonic acid-functionalized silica nanoparticles. Sulfosuccinic acid (SSA) and glutaraldehyde were used as double crosslinking agents, where the effect of SSA content on membrane properties, including water vapor absorption, water uptake, ion exchange capacity, and proton conductivity was investigated and were found to increase as a function of SSA loading. The most promising membrane was then formed into a composite with either silica nanoparticles containing poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPS-Si) or poly (styrene sulfonic acid) (PSSA-Si). PAMPS-Si and PSSA-Si were characterized by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FTIR). The effects of nanoparticle loading and polymer shell on membrane properties were studied. Proton conductivity increased at higher nanoparticle loadings, and reached a maximum of 3.8–3.9 × 10^?3 S/cm at 20% loading. The influence of polymer shell on membrane properties was not significantly observed.     

Cross-linked poly(vinyl alcohol) and poly(styrene sulfonic acid-co-maleic anhydride)-based semi-interpenetrating network as proton-conducting membranes for direct methanol fuel cells

A series of semi-interpenetrating network (SIPN) membranes was synthesized by using poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) as a cross-linking agent and poly(styrene sulfonic acid-co-maleic acid) (PSSA-MA) as a proton source for direct methanol fuel cell (DMFC) application. A bridge of SSA between PVA molecules not only reinforced the network but also provided extra proton-conducting paths. PSSA-MA chains trapped in the network were the major proton conduction path of the membrane. The SIPN membranes with 80% PSSA-MA (SIPN-80) exhibited a higher proton conductivity value of 2.59 × 10⁻² S cm⁻¹ and very low methanol permeability (4.1 × 10⁻⁷ cm² s⁻¹). More specifically, the SIPN membranes exhibited very high selectivity (proton conductivity/methanol permeability). Membrane characteristics such as water uptake, proton conductivity and methanol permeability were evaluated to determine the effect of PVA molecular weights. The SIPN membranes with higher PVA molecular weight were also evaluated using methanol and oxygen gas in a single cell fuel cell at various temperatures. Power density value of over 100 mW cm⁻² was obtained for SIPN membrane-based membrane electrode assembly at 80 °C and using commercial binary alloy anode catalysts and 2 M methanol.     

Poly(styrene sulfonic acid)/poly(vinyl alcohol) copolymers with semi-interpenetrating networks as highly sulfonated proton-conducting membranes

Poly(styrene sulfonic acid)/poly(vinyl alcohol) proton-conducting membranes with semi-interpenetrating networks (semi-IPNs) were prepared using a modified two-step crosslinking strategy. We previously employed sulfosuccinic acid (SSA) and glutaraldehyde (GA) as crosslinking agents to form a dense hydrophobic layer at the outer membrane surface. Although the proton conductivity of the resulting membrane increased with the content of SSA, the methanol permeability also increased. In this study it was found that the introduction of a sufonating agent, with a high molecular weight, i.e. poly(styrene sulfonic acid) (PSSA), at a PSSA/poly(vinyl alcohol) (g g⁻¹) ratio greater than 0.72, increased the density of the tangled IPN structures that effectively impede the membrane's permeability to MeOH, while enhancing its proton conductivity. The synthesized semi-IPN membranes exhibited high proton conductivities (up to 5.88 × 10⁻² S cm⁻¹ at room temperature, i.e. greater than those of Nafion membranes) and high resistances to MeOH permeation (ca. 1 × 10⁻⁷ cm² S⁻¹, that is approximately one order of magnitude lower than that of Nafion membranes).     

Novel proton exchange membranes based on proton conductive sulfonated PAMPS/PSSA-TiO2 hybrid nanoparticles and sulfonated poly (ether ether ketone) for PEMFC

Nanocomposite membranes based on sulfonated poly (ether ether ketone) (SPEEK) and sulfonated core-shell TiO₂ nanoparticles were prepared. TiO₂ nanoparticles were sulfonated by redox polymerization method by using sodium styrene sulfonate (SSA) and 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) monomers. The resultant hybrid nanoparticles (PAMPS-gTiO₂ and PSSA-g-TiO₂) were introduced to SPEEK with a sulfonation degree of 68%. Grafting of sulfonated polymers onto TiO₂ nanoparticles enhanced the content of proton transport sites in the membrane, leading to an increase in proton conductivity and power density. Besides, the mechanical and dimensional stabilities of the nanocomposite membranes were also improved compared with pure SPEEK membrane. The maximum power density for membranes containing 7.5 wt% of PAMPS-gTiO₂ and PSSA-g-TiO₂ nanoparticles at 80 °C obtained 283 mW cm⁻² and 245 mW cm⁻², respectively.     

Novel cross-linked sulfonated poly (arylene ether ketone) membranes for direct methanol fuel cell

To prepare a cross-linked proton exchange membrane with low methanol permeability and high proton conductivity, poly (vinyl alcohol) is first blended with sulfonated poly (arylene ether ketone) bearing carboxylic acid groups (SPAEK-C) and then heated to induce a cross-linking reaction between the carboxyl groups in SPAEK-C and the hydroxyl groups in PVA. Fourier transform infrared spectroscopy is used to characterize and confirm the structure of SPAEK-C and the cross-linked membranes. The proton conductivity of the cross-linked membrane with 15% PVA in weight reaches up to 0.18 S cm⁻¹ at 80 °C (100% relative humidity), which is higher than that of Nafion membrane, while the methanol permeability is nearly five times lower than Nafion. The ion-exchange capacity, water uptake and thermal stability are investigated to confirm their applicability in fuel cells.     

Crosslinked composite membrane by radiation grafting of 4-vinylpyridine/triallyl-cyanurate mixtures onto poly(ethylene-co-tetrafluoroethylene) and phosphoric acid doping

New crosslinked composite membranes containing doped phosphoric acid (PA) were prepared by radiation induced grafting of 4-vinylpyridine (4-VP) and triallyl cyanurate (TAC) mixtures at various concentrations onto poly(ethylene-co-tetrafluoroethylene) (ETFE) films followed by acid doping. The effect of grafting parameters such as TAC concentration, absorbed dose and monomer concentration on the degree of grafting was investigated. The properties of the obtained membranes such as chemical composition, thermal stability and mechanical properties were evaluated using Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA) and universal mechanical tester, respectively. The proton conductivity of the membranes was investigated in correlation with TAC content and temperature using the impedance spectroscopy. Of all samples, the crosslinked membrane obtained from grafting a mixture of 4-VP with 5 vol% TAC having a DG of 65% exhibited proton conductivity as high as 39 mS/cm under dry condition at 120 °C. The mechanical properties of the crosslinked membranes were significantly improved compared to the non-crosslinked counterpart. The presence of an interesting combination of properties in PA doped crosslinked membrane suggests a potential for application in medium temperature proton exchange membrane fuel cell.     

Synthesis and properties of novel HMS-based sulfonated poly(arylene ether sulfone)/silica nano-composite membranes for DMFC applications

Novel 4,4′-dihydroxy-α-methylstilbene (HMS)-based sulfonated poly(arylene ether sulfone) with sulfonic acid composition ranging from 10 to 40 mol% was synthesized via nucleophilic step polymerization of 4,4′-dihydroxy-α-methylstilbene, 4,4′-dichloro-3,3′-disulfonic acid diphenylsulfone and 4,4′-dichlorodiphenylsulfone and blended with silica sol to form organic/inorganic nano-composite membranes. The organic/inorganic nano-composite copolymers produced show a high glass transition temperature and thermal decomposition temperatures from 318 to 451 °C. The copolymers present appropriate toughness during the membrane process. The equilibrium water uptake and proton conductivity of the obtained organic/inorganic nano-composite membranes were measured as functions of temperature, degree of sulfonation and silica content. In general, the water uptake increased from 8 to 37 wt.%, and the proton conductivity of the organic/inorganic nano-composite membranes increased from 0.003 to 0.110 S cm⁻¹ as the degree of sulfonation increased from 10 to 40 mol%, the silica content increased from 3 to 10 wt.%, and the temperature increased from 30 to 80 °C. The single cell performance of the 40 mol% organic/inorganic nano-composite membrane with various silica contents ranged from 11 to 13 mW cm⁻² at 80 °C, and the power density was higher than Nafion^® 117. Including the thermal properties, swelling, conductivity and single cell performance, the nano-composite membranes are able to satisfy the requirements of proton exchange membranes for direct methanol fuel cells (DMFC).     

Composite membranes based on sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety and poly(amic acid) for proton exchange membrane fuel cell application

Composite membranes based on sulfonated poly(aryl ether ketone)s containing the hexafluoroisopropylidene diphenyl moiety and poly(amic acid) with oligoaniline in the main chain have been prepared and immersed in H₃PO₄ to obtain acid-doped composite films. As expected, the water uptake values and methanol permeability of the composite membranes decrease with the increase of the weight fraction of PAA in the membrane matrix. Notably, the SPEEK-6F/PAA-15 shows a water uptake of 13.2% and a methanol permeability of 0.9 × 10⁻⁷ cm² s⁻¹, which are much lower than those of the Nafion (28.6% and 15.5 × 10⁻⁷ cm² s⁻¹, respectively). Although the proton conductivities decrease after the addition of PAA, higher selectivity values are obtained with the composite membranes. Therefore, the SPEEK-6F/PAA blend membranes, with the improved proton conductivity, methanol resistance and good thermal stability, can be used as a good alternative for proton conductive membranes with potential application in proton exchange membrane fuel cells (PEMFCs).     

Fabrication and characterization of poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) proton-conducting composite membranes for direct methanol fuel cells

A high performance poly(vinyl alcohol)/montmorillonite/poly(styrene sulfonic acid) (PVA/MMT/PSSA) proton-conducting composite membrane was fabricated by a solution casting method. The characteristic properties of these blend composite membranes were investigated by using thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, methanol permeability measurement, and the AC impedance method. The ionic conductivities for the composite membranes are in the order of 10⁻³ S cm⁻¹ at ambient temperature. There are two proton sources used on this novel composite membrane: the modified MMT fillers and PSSA polymer, both materials all contain the -SO₃H group. Therefore, the ionic conductivity was greatly enhanced. The methanol permeabilities of PVA/MMT/PSSA composite membranes is of the order of 10⁻⁷ cm² s⁻¹. It is due to the excellent methanol barrier properties of the PVA polymer. The peak power densities of the air-breathing direct methanol fuel cells (DMFCs) with 1M, 2M, 4M CH₃OH fuels were 14.22, 20.00, and 13.09 mW cm⁻², respectively, at ambient conditions. The direct methanol fuel cell with this composite polymer membrane exhibited good electrochemical performance. The proposed PVA/MMT/PSSA composite membrane is therefore a potential candidate for future applications in DMFC.     

Studies on new highly phosphonated poly (ether ether ketone) based promising proton conducting membranes for high temperature fuel cell

The present study deals with the development of poly ether ether ketone (PEEK) based proton exchange membrane (PEM) having phosphonic acid as protogenic moiety. The synthesis of phosphonated PEEK was carried out in two simpler steps i.e. chloromethylation followed by phosphonation through Michaelis-Arbuzov reaction. The product was further investigated for structural property through FTIR, ¹H NMR, ¹³C NMR, ³¹P NMR and XRD while thermal properties were analysed by TGA. Other physical properties such as ion exchange capacity, water uptake and proton conductivity were determined for the prepared membranes to execute their suitability as PEM. The presence of phosphonic acid group provides good thermal and chemical stability to the membranes. The high substitution degree (1.11–1.56) achieved in present case was favourable for providing significant proton conductivity of 0.047 S/cm at 120 °C under hydrated conditions to the corresponding membranes which entitle them as potential candidate for PEMs in fuel cells at high temperature.     

Performance of passive direct methanol fuel cell with poly(vinyl alcohol)-based polymer electrolyte membranes

Polymer electrolyte membranes (PEMs) were prepared from poly(vinyl alcohol) (PVA) and a modified PVA polyanion containing 2 mol% of 2-methyl-1-propanesulfonic acid (AMPS) groups as a copolymer. The effect of the AMPS content and the crosslinking conditions on the properties of the membranes was investigated in PEMs with various AMPS contents prepared under various crosslinking conditions. The proton conductivity and the permeability of methanol through the PEMs increased with increasing AMPS content, C_AMPS, and with decreasing annealing temperature, T_a, because of the increase in the degree of swelling. The permeability coefficient of methanol through the PEM prepared under the conditions of C_AMPS = 2.0 mol% and T_a 190 °C was approximately 30 times lower than that of Nafion^® 117 under the same measurement conditions. A maximum proton permselectivity of 96 × 10³ S cm⁻³ s, which is defined as the ratio of the proton conductivity to the permeability of methanol, was obtained for this PEM. The permselectivity value is about three times higher than that of Nafion^® 117. A passive air-breathing-type DMFC test cell constructed using the PEM delivered 2.4 mW cm⁻² of maximum power density, P_max, at 2 M methanol concentration, which is smaller than the value obtained with Nafion^® 117. However, at high methanol concentrations (>10 M), the P_max of the PEM decreases slightly to 1.6 mW cm⁻² (at a methanol concentration of 20 M), whereas the P_max of Nafion^® 117 falls to almost zero.     

Design and synthesis of side-chain optimized poly(2,6-dimethyl-1,4-phenylene oxide)-g-poly(styrene sulfonic acid) as proton exchange membrane for fuel cell applications: Balancing the water-resistance and the sulfonation degree

Side-chain optimized poly (2,6-dimethyl-1,4-phenylene oxide)-g-poly (styrene sulfonic acid) (PPO-g-PSSA) is designed with balanced water-resistance and sulfonation degree. The PPO-g-PSSA is synthesized by controlled atom-transfer radical polymerization (ATRP) from brominated poly (2,6-dimethyl-1,4-phenylene oxide) (PPO-xBr) and ethyl styrene-4-sulfonate and followed by hydrolysis. A series of PPO-g-PSSA are prepared possessing different bromination degree (x) of PPO-xBr and polymerization degree (m) of the side-chains and the water-resistances of the fabricated membranes are investigated. The results show that a PPO-g-PSSA at relatively low x (x < 0.2) and high m (m > 4) exhibits good balance between the water-resistance and the sulfonation degree. Namely, it displays suitable proton conductivity with compromised water-resistance. Moreover, a maximum ion exchange capacity (IEC) of 3.24 mmol g^?1 is reached without the sacrifice of water-resistance. In addition, PPO-g-0.08PSSA-13 and PPO-g-0.14PSSA-4 are chosen characterized by thermogravimetric analysis, proton conductivities and mechanical properties. At 90% RH, the optimized PPO-g-0.08PPSA-13 possesses a proton conductivity of 37.9 mS cm^?1 at 40 °C and 45.5 mS cm^?1 at 95 °C, respectively.     

4-Aminopyridine grafted sulfonated poly(arylene ether ketone sulfone) proton exchange membrane with high relative selectivity for fuel cells

A series of sulfonated poly(arylene ether ketone sulfone)s polymer having a degree of sulfonation of 80% and a carboxyl group in the side chain (C-SPAEKS) were prepared by polycondensation. The 4-aminopyridine grafted sulfonated poly(arylene ether ketone sulfone)s polymer membranes (SPPs) were prepared by amidation reaction with the carboxyl group to immobilize 4-aminopyridine on the side chain. The ¹H NMR results and Fourier transform infrared of SPP membranes demonstrated the successful grafting of the 4-aminopyridine. Proton conductivity, water absorption, swelling ratio, and thermal stability of different proportions of SPP membranes were investigated under the different conditions. With the increase of pyridine grafting content, the methanol permeability coefficient of the membrane decreased significantly from 8.17 × 10⁻⁷ cm²s⁻¹ to 8.92 × 10⁻⁸ cm²s⁻¹ at 25 °C. And, the proton conductivity and relative selectivity of the membrane were positively correlated with the grafted pyridine content. Among them, the SPP-4 membrane exhibited the highest proton conductivity of 0.088 Scm⁻¹ at 100 °C. The relative selectivity increased from 4.73 × 10⁴ S scm⁻³ to 9.84 × 10⁴ S scm⁻³.     

A novel sulfonated poly(ether ether ketone) and cross-linked membranes for fuel cells

A novel poly(ether ether ketone) (PEEK) containing pendant carboxyl groups has been synthesized by a nucleophilic polycondensation reaction. Sulfonated polymers (SPEEKs) with different ion exchange capacity are then obtained by post-sulfonation process. The structures of PEEK and SPEEKs are characterized by both FT-IR and ¹H NMR. The properties of SPEEKs as candidates for proton exchange membranes are studied. The cross-linking reaction is performed at 140 °C using poly(vinyl alcohol) (PVA) as the cross-linker. In comparison with the non-cross-linked membranes, some properties of the cross-linked membranes are significantly improved, such as water uptake, methanol resistance, mechanical and oxidative stabilities, while the proton conductivity decreases. The effect of PVA content on proton conductivity, water uptake, swelling ratio, and methanol permeability is also investigated. Among all the membranes, SPEEK-C-8 shows the highest selectivity of 50.5 × 10⁴ S s cm⁻³, which indicates that it is a suitable candidate for applications in direct methanol fuel cells.     

Direct methanol fuel cell performance of sulfonated poly (2,6-dimethyl-1,4-phenylene oxide)-polybenzimidazole blend proton exchange membranes

Various sulfonated poly (2,6-dimethyl-1,4-phenylene oxide) (SPPO)-polybenzimidazole (PBI) blend membranes were prepared and investigated as proton exchange membranes (PEMs) for direct methanol fuel cell (DMFC) applications. With increasing PBI content water swelling, ion exchange capacity, proton conductivity and methanol permeability of SPPO-PBI membranes were found to be decreased due to acid-base interactions between sulfonate and the amine groups of the blended components. Among various SPPO-PBI blend membranes, 80:20 wt% was found as the optimum composition, which showed the highest membrane selectivity parameter. Direct methanol-air single fuel cell tests revealed a higher cell efficiency of 11.6% for SPPO80-PBI20 than 10.9% for Nafion^®117 at 5 M methanol feed, and also a higher power density of 57.6 mW.cm⁻² compared to 39.4 mW.cm⁻² for Nafion^®117. Transport properties as well as DMFC performance results of SPPO-PBI blend PEMs converge to indicate their potential for DMFC applications.     

Characterization of cation-exchange membranes prepared from poly(vinyl alcohol) and poly(vinyl alcohol-b-styrene sulfonic acid)

Block-type cation-exchange membranes (CEMs) have been prepared by blending poly(vinyl alcohol) (PVA) and the polyanion poly(vinyl alcohol-b-styrene sulfonic acid) at various molar percentages of cation-exchange groups to vinyl alcohol groups, C_pa, and by cross-linking the PVA chains with glutaraldehyde (GA) solution at various GA concentrations, C_GA. The characteristics of the block-type CEMs were compared with random-type CEMs prepared in a previous study from the random copolymer, poly(vinyl alcohol-co-2-acrylamido-2-methylpropane sulfonic acid). At equal molar percentages of the cation-exchange groups, the water content of the block-type CEMs was less than that of the random-type CEMs. The charge density of the block-type CEMs increased with increasing C_pa and reached a maximum value. Further, the maximum value of the charge density increased with increasing C_GA. The maximum charge density value of 1.3 mol/dm³ was obtained for the block-type CEM with C_pa = 3.1 mol% and C_GA = 0.10 vol.%, which is almost two thirds of the value of a commercially available CEM [CMX: ASTOM Corp. Japan]. A comparison of the block-type and random-type CEMs with almost the same membrane resistance showed that the block-type CEMs had higher dynamic transport numbers than the random-type ones. The dynamic transport number and membrane resistance of the block-type CEM with C_pa = 4.0 mol% and C_GA = 0.10 vol.% were 0.96 and 4.9 Ω cm², respectively.