Environmentally sensitive hydrogels: N‐isopropyl acrylamide/Acrylamide/ Mono‐, Di‐, Tricarboxylic acid crosslinked polymers

Environmentally sensitive hydrogels responsive to various stimuli such as temperature, pH, ionic strength of the medium and the solvent were prepared by using N‐isopropyl acrylamide (NIPAM), acrylamide (AAm) and monomers that have various number of carboxylic acid (XA) functionality using N,N′‐methylene bisacrylamide (Bis) as crosslinker. Hydrogels were prepared via free radical polymerization reaction in aqueous solution. P(NIPAAm‐co‐AAm) and p(NIPAAm‐co‐AAm)/XA hydrogels that contain monoprotic crotonic acid (CA) exhibit a lover critical solution temperature (LCST) at 28°C, whereas p(NIPAAm‐co‐AAm)/IA (IA:itaconic acid), and P(NIPAAm‐co‐AAm)/ACA (ACA:acotonic acid) hydrogels exhibit a lover critical solution temperature at 30.7°C and 34.4°C, respectively. Spectroscopic and thermal analyses were performed for the structural and thermal characterizations of the prepared hydrogel. The swelling experiments as equilibrium swelling percentages by gravimetrically were carried out in different solvents, at different solutions temperature, pH, and ionic strengths to determine their effects on swelling characteristic of hydrogels. POLYM. ENG. SCI., 55:843–851, 2015. © 2014 Society of Plastics Engineers     

Synthesis of well‐defined responsive membranes with fixable solvent responsiveness

A versatile method is described to synthesize a new family of solvent‐responsive membranes whose response states can be not only tunable but also fixable via ultraviolet (UV) irradiation induced crosslinking. The atom transfer radical polymerization (ATRP) initiator 2‐bromoisobutyryl bromide was first immobilized on the poly(ethylene terephthalate) (PET) track‐etched membrane followed by room‐temperature ATRP grafting of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(2‐hydroxyethyl methacrylate‐co‐2‐(dimethylamino)ethyl methacrylate) (P(HEMA‐co‐DMAEMA)) respectively. The hydroxyl groups of PHEMA were further reacted with cinnamoyl chloride (a photosensitive monomer) to obtain photo‐crosslinkable PET‐g‐PHEMA/CA membrane and PET‐g‐P(HEMA/CA‐co‐DMAEMA) membrane. The length of grafted polymer chains was controllable by varying the polymerization time. X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy in attenuated total reflection and thermogravimetric analysis were employed to characterize the resulting membranes. The various membrane surface morphologies resulting from different states of the grafted chains in water and dimethylformamide were characterized by scanning electron microscopy. It was demonstrated that the grafted P(HEMA/CA‐co‐DMAEMA) chains had more pronounced solvent responsivity than the grafted PHEMA/CA chains. The surface morphologies of the grafted membranes could be adjusted using different solvents and fixed by UV irradiation crosslinking. © 2014 Society of Chemical Industry     

Synthesis of an alginate–poly(sodium acrylate‐co‐acrylamide) superabsorbent hydrogel with low salt sensitivity and high pH sensitivity

This article describes the synthesis and swelling behavior of a superabsorbing hydrogel based on sodium alginate (NaAlg) and polyacrylonitrile (PAN). The physical mixture of NaAlg and PAN was hydrolyzed with a solution of NaOH to yield an alginate–poly(sodium acrylate‐co‐acrylamide) [Alg–poly(NaAA‐co‐AAm)] superabsorbent hydrogel. A proposed mechanism for hydrogel formation was suggested, and the structure of the product was established with Fourier transform infrared spectroscopy. The effects of reaction variables were systematically optimized to achieve a hydrogel with a swelling capacity as high as possible. Under the optimized conditions concluded, the maximum capacity of swelling in distilled water was 610 g/g. The absorbency of the synthesized hydrogels was also measured in various salt solutions. The swelling ratios decreased with an increase in the ionic strength of the salt solutions. In addition, the swelling capacity was determined in solutions with pHs ranging from 1 to 13. The Alg–poly(NaAA‐co‐AAm) hydrogel exhibited pH responsiveness, so a swelling–deswelling pulsatile behavior was recorded at pHs 2 and 8. This on–off switching behavior made the hydrogel as a good candidate for the controlled delivery of bioactive agents. Finally, the swelling kinetics of the hydrogels with various particle sizes were preliminarily investigated as well. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2927–2937, 2006     

Synthesis and characterization of temperature‐responsive poly(vinyl alcohol)‐based copolymers

A poly(vinyl alcohol) (PVA)/sodium acrylate (AANa) copolymer was synthesized to improve the water solubility of PVA at the ambient temperature. Furthermore, a series of temperature‐responsive acetalyzed poly(vinyl alcohol) (APVA)‐co‐AANa samples of various chain lengths, degrees of acetalysis (DAs), and comonomer contents were prepared via an acid‐catalysis process. Fourier transform infrared and ¹H‐NMR techniques were used to analyze the compositions of the copolymers. The measurement of the turbidity change for APVA‐co‐AANa aqueous solutions at different temperatures revealed that the lower critical solution temperature (LCST) of the copolymers could be tailored through the control of the molecular weight of the starting PVA‐co‐AANa, DA, and comonomer ratios. Lower LCSTs were observed for APVA‐co‐AANa with a longer chain length, a higher DA, and fewer acrylic acid segments. In addition, the LCSTs of the APVA‐co‐AANa aqueous solutions appeared to be salt‐sensitive. The LCSTs decreased as the concentration of NaCl increased. Moreover, atomic force microscopy images of APVA‐co‐AANa around the LCST also proved the temperature sensitivity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of poly(N‐tert‐butylacrylamide‐co‐acrylamide) ferrogel

Magnetic‐field‐sensitive gel, called ferrogel, was prepared by a two‐step procedure in which first step requires synthesis of the poly(N‐tert‐butylacrylamide‐co‐acrylamide) [P(NTBA‐co‐AAm)] hydrogel and during second step magnetite (Fe₃O₄) particles were formed in the hydrogel via coprecipitation of Fe(II) and Fe(III) ions in alkaline medium at 70°C. The obtained ferrogel was characterized by attenuated total reflectance Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy combined with energy dispersive spectroscopy, and electron spin resonance measurements. The magnetic responsive of the ferrogel was also investigated by applying magnetic field to the ferrogel. The extent of a bending degree of the ferrogel depends on the applied magnetic field strength. In addition, the magnetic responsive studies also indicated that formed magnetite content in the hydrogel is high enough to achieve considerable magnetic response to external magnetic field. As a result, the P(NTBA‐co‐AAm) ferrogel may be useful for potential applications in magnetically controlled drug release systems, magnetic‐sensitive sensors, and pseudomuscular actuators. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermo‐responsive injectable hydrogel system based on poly(N‐isopropylacrylamide‐co‐vinylphosphonic acid). I. Biomineralization and protein delivery

To achieve the injectable hydrogel system in order to improve bone regeneration by locally delivering a protein drug including bone morphogenetic proteins, thermo‐responsive injectable hydrogels composed of N‐isopropylacrylamide (NIPAAm) and vinyl phosphonic acid (VPAc) were prepared. The P(NIPAAm‐co‐VPAc) hydrogels were also biomineralized by urea‐mediation method to create functional polymer hydrogels that deliver the protein drug and mimic the bone extracellular matrix. The loosely cross‐linked P(NIPAAm‐co‐VPAc) hydrogels were pliable and fluid‐like at room temperature and could be injected through a small‐diameter aperture. The lower critical solution temperature (LCST) of P(NIPAAm‐co‐VPAc) hydrogel was influenced by the monomer ratio of NIPAAm/VPAc and the hydrogel with a 96/4 molar ratio of NIPAAm/VPAc exhibited an LCST of ～34.5°C. Water content was influenced by temperature, NIPAAm/VPAc monomer ratio, and biomineralization; however, all hydrogels maintained more than about 77% of the water content even at 37°C. In a cytotoxicity study, the P(NIPAAm‐co‐VPAc) and biomineralized P(NIPAAm‐co‐VPAc) hydrogels did not significantly affect cell viability. The loading content of bovine serum albumin in hydrogel, which was used as a model drug, gradually increased with the amount of VPAc in the hydrogel owing to the ionic interaction between VPAc groups and BSA molecules. In addition, the release behavior of BSA from the P(NIPAAm‐co‐VPAc) hydrogels was mainly influenced by the drug loading content, water content, and biomineralization of the hydrogels. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of the SA content of a novel thermo‐sensitive P(NIPAM‐co‐SA) copolymer on denatured lysozyme refolding in vitro

A novel hydrogel of P(NIPAM‐co‐SA) copolymer was synthesized by inverse suspension polymerization by adding sodium acrylate (SA) to improve the phase transition properties of poly(N‐isopropylacrylamide) (PNIPAM). The morphologies, size distribution and thermosensitive characteristics of gel particles were studied and the maximal swelling ratio and LCST (Lower Critical Solution Temperature) of gel particles increased obviously with the addition of SA comonomer. When the protein concentration was 250 μg/mL, the optimized refolding conditions of denatured lysozyme with P(NIPAM‐co‐SA) hydrogel were that operating at the temperature of 35°C and a urea concentration of 2M, in which the mass ratio of P(NIPAM‐co‐SA) hydrogel with 4% SA copolymerized to lysozyme was 10 : 1. Under the optimized conditions, the activity recovery of lysozyme increased to 76.5% assisted by P(NIPAM‐co‐SA) gel particles compared with 55.6% by simple dilution. When refolding finished, the gel particles could be removed and recovered easily and the activity recovery of lysozyme was still as high as 61.5% after reused for 5 batches. With the addition of different amounts of SA comonomer, the hydrophobicity of the copolymer could be varied. Then the copolymerized hydrogel inhibits protein molecules aggregation more effectively through the moderate hydrophobic interactions between copolymers and protein molecules in the course of lysozyme refolding compared with the presence of PNIPAM polymer. All results above demonstrate that the P(NIPAM‐co‐SA) is a cost effective additive with tunable hydrophobicity for application in the refolding of recombinant proteins expressed as inclusion bodies in vitro. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Immobilization of chymotrypsin with interpolymer complexes of P(TM‐co‐AAm)/PAA

Chymotrypsin was immobilized with interpolymer complexes formed by the cationic polymer poly(allyltrimethyl ammonium chloride‐co‐acrylamide) [P(TM‐co‐AAm)] and poly(acrylic acid) (PAA). The introduction of a small amount of cationic groups led to a much stronger polymer–polymer interaction between P(TM‐co‐AAm) and PAA. The characteristic pH sensitivity of this kind of complex provided the possibilities of controlling the activity of the immobilized enzyme and separating the immobilized enzyme from the batch by changing the pH of the medium. Compared with the free enzyme, the immobilized chymotrypsin had higher thermal stability, acid–base stability, and stability in use. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2013–2018, 2001     

Genipin‐cross‐linked chitosan‐based hydrogels: Reaction kinetics and structure‐related characteristics

The main aim of this work is the synthesis and characterization of cross‐linked chitosan systems. Chitosan hydrogels can be prepared by physical or chemical cross‐linking of polymer chains. Chemical cross‐linking, leading to the creation of hydrogel networks possessing improved mechanical properties and chemical stability, can be achieved using either synthetic agents or natural‐based agents. In this work, the cross‐linker Genipin, a naturally derived compound, was selected because of the lower acute toxicity compared to many other commonly used synthetic cross‐linking reagents. In particular, the chemical stabilization of chitosan through genipin cross‐linking molecules was performed and characterized by calorimetric analyses (differential scanning calorimetry), swelling measurements in different pHs, and ionic strength. The reaction kinetics was carried out by means of rheological measurements, and both the activation energy (E_a) and the reaction order (m) were calculated. The hydrogel analyses were carried out at different concentrations of genipin (GN1 and GN2). The results were used to evaluate the possibility to use the chemical cross‐linked chitosan–genipin hydrogel for biomedical applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42256.     

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) graft copolymers and their application as carriers for drug delivery system

Poly(N‐isopropylacrylamide‐co‐hydroxyethyl methacrylate) [P(NIPAM‐co‐HEMA)] copolymer was synthesized by controlled radical polymerization from respective N‐isopropylacrylamide (NIPAM) and hydroxyethyl methacrylate (HEMA) monomers with a predetermined ratio. To prepare the thermosensitive and biodegradable nanoparticles, new thermosensitive graft copolymer, poly(L ‐lactide)‐graft‐poly(N‐isoporylacrylamide‐co‐hydroxyethyl methacrylate) [PLLA‐g‐P(NIPAM‐co‐HEMA)], with the lower critical solution temperature (LCST) near the normal body temperature, was synthesized by ring opening polymerization of L ‐lactide in the presence of P(NIPAM‐co‐HEMA). The amphiphilic property of the graft copolymers was formed by the grafting of the PLLA hydrophobic chains onto the PNIPAM based hydrophilic backbone. Therefore, the graft copolymers can self‐assemble into uniformly spherical micelles ò about 150–240 nm in diameter as observed by the field emission scanning electron microscope and dynamic light scattering. Dexamethasone can be loaded into these nanostructures during dialysis with a relative high loading capacity and its in vitro release depends on temperature. Above the LCST, most of the drugs were released from the drug‐loaded micelles, whereas a large amount of drugs still remains in the micelles after 48 h below the LCST. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Alkaline protease production by immobilized growing cells of Serratia marcescens with interpolymer complexes of P(TM‐co‐AAm)/PAA

The growing cells of Serratia marcescens (SM) were immobilized with the interpolymer complex carrier, which is formed by the cationic polymer, poly(allyltrimethyl ammonium chloride‐co‐acrylamide) [P(TM‐co‐AAm)], and poly(acrylic acid) (PAA). When the association degree of PAA is suitable to the cationic degree of P(TM‐co‐AAm), the effective crosslinking network provides the most favorable circumstances for the cell immobilization. The alkaline protease can be produced by the immobilized SM with high activity. Compared with the free cells, the immobilized SM has higher thermal stability, acid‐base stability, operational stability, and storage stability. Under the optimum immobilizing conditions, not only the living cells of SM but also thermophilic Bacillus firmus (TBF) were immobilized with the complex of P(TM‐co‐AAm)/PAA. The results show the carrier of P(TM‐co‐AAm)/PAA complex to be superior in properties to the usual carriers, such as Na‐alginate and carrageenan. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 178–183, 2002; DOI 10.1002/app.10293     

Synthesis and superswelling behavior of carboxymethylcellulose–poly(sodium acrylate‐co‐acrylamide) hydrogel

In this paper, attention is paid to synthesis and swelling behavior of a superabsorbent hydrogel based carboxymethylcellulose (CMC) and polyacrylonitrile (PAN). The physical mixture of CMC and PAN was hydrolyzed in NaOH solution to yield hydrogel, CMC–poly(NaAA‐co‐AAm). During alkaline hydrolysis, the nitrile groups of PAN were completely converted to a mixture of hydrophilic carboxamide and carboxylate groups followed by in situ crosslinking of the grafted PAN chains. A proposed mechanism for hydrogel formation was suggested and the structure of the product was established using FTIR spectroscopy. The reaction variables affecting the swelling capacity of the hydrogel were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. Swelling measurements of the synthesized hydrogels in various chloride salt solutions indicated a swelling‐loss with increase in the ionic strength of the salt solutions. The pH of the various solutions also affected the swelling of the superabsorbent. Furthermore, the present hydrogels showed a pH‐reversible property. Finally, the swelling kinetics of synthesized hydrogels with various absorbent particle sizes was briefly examined. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and swelling behavior of thermosensitive IPN hydrogels based on sodium acrylate and N‐isopropyl acrylamide by a two‐step method

A series of interpenetrating polymer network (IPN) hydrogels having higher swelling ratio (SR) and thermosensitivity were synthesized from sodium acrylate (SA) and N‐isopropyl acrylamide (NIPAAm) by a two‐step method. A series of the porous poly(sodium acrylate ‐co‐1‐vinyl–2‐pyrrolidone) [poly(SA‐co‐VP)], (SV), hydrogels were prepared from acrylic acid having 90% degree of neutralization and VP monomer in the first step. The second step is to immerse the SV dried gels into the NIPAAm solution containing initiator, accelerator, and crosslinker to absorb NIPAAm solution and then polymerized to form the poly(SA‐co‐VP)/poly(NIPAAm) IPN hydrogels (SVN). The effect of the different molar ratios of SA/VP and the content of NIPAAm on the swelling behavior and physical properties of the SVN hydrogels was investigated. Results showed that the SVN hydrogels displayed an obviously thermoreversible behavior when the temperature turns across the critical gel transition temperature (CGTT) of poly(NIPAAm) hydrogel. The pore diameter distributions inside the hydrogel also indicated that the pore sizes inside the SVN hydrogels were smaller than those inside the SV hydrogels. At the same time, the more proportion of SA was added into the hydrogel, the larger pore diameter of the SV hydrogel was formed. The results also showed that the SR decreased with an increase of the VP content in the SV hydrogel and more obviously decreased in the SVN hydrogels. The SVN networks also showed stronger shear moduli than SV hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and characterization of poly(2‐hydroxyethyl methacrylate)‐functionalized Fe‐Au/core‐shell nanoparticles

Disulfide‐bearing poly(2‐hydroxyethyl methacrylate) (DT‐PHEMA) was synthesized by atom transfer radical polymerization technique, which was subsequently immobilized onto core‐shell structured Fe‐Au nanoparticles (Fe‐AuNPs) by applying a “grafting to” protocol to afford new PHEMA‐grafted Fe‐AuNPs (PHEMA‐g‐Fe‐AuNPs). The Fe‐AuNPs having the iron core of 20–22 nm and the gold layer of 1–2 nm were initially prepared by inverse micelle technique and characterized by XRD and high‐resolution transmission electron microscopy (HR‐TEM). The grafting of DT‐PHEMA on the Fe‐AuNPs was confirmed by Fourier transformed infrared spectrophotometer, thermogravimetric (TGA), X‐ray photoelectron spectroscopy, and energy dispersive X‐ray analyses. The average diameter of polymer coated Fe‐AuNPs was determined to be 28 nm by HR‐TEM analysis. The amount of the polymer on the surface of Fe‐AuNPs was calculated to be about 50% by TGA analysis. The studies of magnetic property by the superconducting quantum interference devices indicate the superparamagnetic property of Fe‐AuNPs and PHEMA‐g‐Fe‐AuNPs. The optical property of the PHEMA‐g‐Fe‐AuNPs was recorded by UV–visible absorption spectroscopy, and a redshift in the absorption was observed, which further suggests the PHEMA attachment on the surface of Fe‐AuNPs. The magnetic nanocomposites demonstrate good dispersibility in common polar solvents. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of synthesis‐solvent composition and initiator concentration on the swelling behaviour of poly(N‐isopropylacrylamide) P(NIPAAM), poly(NIPAAM‐co‐dimethyl itaconate), and poly(NIPAAM‐co itaconic acid) gels

The effects of synthesis‐solvent composition, initiator concentration, comonomer type and monomer purity on the volume swelling ratios, and polymer‐solvent interaction parameter χ have been investigated as a function of temperature. Non‐ionic N‐isopropylacrylamide (NIPAAM) homopolymer gels, poly[NIPAAM‐co‐(dimethyl itaconate)] (P(NIPAAM‐co‐DMI)) and poly[NIPAAM‐co‐(itaconic acid)] (P(NIPAAM‐co‐IA)) gels containing hydrophobic (DMI) and hydrophilic (IA) comonomers were prepared by free radical polymerization using potassium persulfate (KPS) –N, N, N′, N′‐tetramethyl ethylene diamine (TEMED) (redox initiator) in the presence of an N, N′‐methylene bis(acrylamide) (MBAAM) cross‐linking agent. The synthesis‐solvent composition (40/60 mixture of water/methanol and water) and initiator concentration employed significantly affected the properties of the NIPAAM gels. The transition temperatures of P(NIPAAM‐co‐IA) gels synthesized in water/methanol mixture were higher than that of the gel obtained in water. Furthermore, χ values of the NIPAAM homopolymer gel prepared with higher KPS content was an increasing function of temperature, while χ values of the sample obtained with lower initiator concentration changed around a critical solubility value 0.50. The results obtained also show that the interactions between monomer and solvent molecules in the reaction media (ie composition of the pregel solution) have an important effect on the formation and properties of the network structure (ie pore sizes of the gels). © 2000 Society of Chemical Industry     

Poly(acrylic acid‐co‐acrylamide‐co‐2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted nanocellulose/poly(vinyl alcohol) composite for the in vitro gastrointestinal release of amoxicillin

Superabsorbent polymer composites (SAPCs) are very promising and versatile materials for biomedical applications. This study concentrates on the development of novel cellulose‐based SAPC, Poly(acrylic acid‐co‐acrylamide‐co?2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted nanocellulose/poly(vinyl alcohol) composite, P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA, as a potential drug delivery vehicle. Amoxicillin was selected as a model drug, which is used for the treatment of Helicobacter pylori induced peptic and duodenal ulcers. P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA was synthesized by graft copolymerization reaction, and FTIR, XRD, SEM, and DLS analyses were performed for its characterization. Equilibrium swelling studies were conducted to evaluate the stimuli‐response behavior of the SAPC and found that equilibrium swelling was dependent on pH, contact time, temperature, ionic strength, concentration of crosslinker and PVA. Maximum drug encapsulation efficiency was found out by using different concentrations of amoxicillin. Drug release studies were carried out at simulated gastric and intestinal fluids and the release % was observed as maximum in intestinal fluids within 4 h. The drug release kinetics was investigated using Peppas' potential equation and follows non‐Fickian mechanism at pH 7.4. Thus, the drug release experiments indicate that P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA would be a fascinating vehicle for the in vitro administration of amoxicillin into the gastrointestinal tract. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40699.     

Hydrogels composite of poly(acrylamide‐co‐acrylate) and rice husk ash. I. Synthesis and characterization

Composite hydrogels of poly(acrylamide‐co‐acrylate) with rice husk ash (RHA) were synthesized and studies of the swelling variables were accomplished comparatively with commercial polyacrylamide gel and PAMACRYL, a poly(acrylamide‐co‐acrylate) hydrogel without RHA. FT‐IR and WAXS were the techniques employed for characterizing a series of hydrogel obtained by varying the percentage of RHA (1, 2, 5, 10, and 20 wt %) and the amount of crosslinking agent (0.05, 0.1, and 0.2 mol %) relative to sum of AAm and AAc. Superabsorbent hydrogel with W_eq > 800 g H₂O/g gel was obtained with percentage of 10 wt % of RHA and 0.1 of crosslinking agent mol %. The hydrogel showed to be sensitive to the pH variation and to the presence of salts. The hydrogels, even though submitted through cycles of drying and swelling, preserved their superabsorbent characteristics and demonstrated better water absorbance properties when compared with commercial polyacrylamide gel. The composite hydrogels of poly(acrylamide‐co‐acrylate) with RHA presented good characteristics to be applied as soil conditioner for using in agriculture. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Experimental and theoretical approaches to investigating the miscibility of anhydride‐containing copolymers and dextran

The miscibility behavior of dextran (Dx) with synthesized functional binary poly(citraconic anhydride‐acrylamide) (poly(CA‐alt‐AAm) and ternary poly(citraconic anhydride‐acrylamide‐vinyl acetate) (poly(CA‐co‐AAm‐co‐VA) copolymers was investigated in dilute aqueous solutions by viscometry and in a solid state by Fourier transform infrared (FTIR) spectroscopy. The relative viscosities of each polymer and their blends with Dx/related copolymer ratios of 20 : 80, 50 : 50, and 80 : 20 were measured at body temperature, 37°C, in bidistilled and deionized water. Starting with the classical Huggins equation, results of the viscosity measurements of each parent polymer and their blends were interpreted in terms of miscibility parameters: Δk, Δb, α, β, ΔB, and μ. Based on the sign convention used with these criteria, the miscibility between Dx and related copolymers was found to increase with the weight fraction of Dx in the blends and with the number of AAm units in the copolymer composition. From FTIR spectral analysis, supporting results were achieved that explained the interactions between Dx and the copolymers. Miscibility behavior was also investigated theoretically with Askadskii's miscibility criterion, and the theoretical calculations provided strong evidence supporting the experimental results. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2132–2141, 2006     

Temperature‐responsiveness and sustained delivery properties of macroporous PEG‐co‐PNIPAAm‐co‐PCL hydrogels

A series of novel thermosensitive macroporous poly (ethylene glycol) (PEG)‐co‐poly(N‐isopropylacrylamide) (PNIPAAm)‐co‐poly (ε‐caprolactone) (PCL) hydrogels were synthesized via in situ free radical polymerization. Poly(ethylene glycol diacrylate) (PEGDAc) and poly(ε‐caprolactone diacrylate) (PCLDAc) were prepared as macrocrosslinkers. All compounds were investigated by Nuclear Magnetic Resonance (NMR) and Fourier transform‐infrared spectroscopy (FT‐IR). Differential Scanning Calorimetry (DSC) results showed the lower critical solution temperatures (LCSTs) of the gels were at around 31°C. The macroporous gels not only had considerable swelling ratios, but also exhibited rapid swelling kinetics and response sensitivity. Above mentioned hydrogels showed a remarkable oscillatory swelling–deswelling transition, making them have potential application in long‐term drug delivery. POLYM. ENG. SCI., 55:223–230, 2015. © 2014 Society of Plastics Engineers     

Electrical actuation of electroresponsive hydrogels based on poly(acrylamide‐co‐acrylic acid)/graphite suitable for biomedical applications

A pH‐sensitive composite hydrogel based on poly(acrylamide‐co‐acrylic acid)/graphite was prepared by solution polymerization process in presence of redox initiator potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine and cross‐linker (ethylene glycol dimethylacrylate). The structures of the hydrogels were confirmed using Fourier transform infrared, X‐ray diffraction, and scanning electron microscopy (SEM) study. Tensile strengths of the hydrogels were determined by using a universal tensile machine, whereas the electrical conductivities of the hydrogels were evaluated using Four‐probe method. The influence of cross‐linker, graphite content, and temperature on the conductivity of the hydrogel was also investigated. The bending behavior of the conducting hydrogels was investigated by exposing the hydrogels under electric field in aqueous medium. By studying the swelling ratio of the polymer synthesized under different conditions, optimization conditions were found for a polymer with the highest swelling ratio. Also, the hemolytic potentiality test revealed that prepared hydrogels are biocompatible in nature. POLYM. COMPOS., 35:27–36, 2014. © 2013 Society of Plastics Engineers