Synthesis and properties of a phosphate ester as curing agent in an epoxy resin system

Phosphate ester compounds display good flame retardancy effect in epoxy resin systems. In this paper, several novel phosphate esters, used as curing agents for epoxy resins, were synthesized based on P₂O₅, phosphoric acid, and different types of alcohol. The structures of phosphate esters were characterized by ³¹P nuclear magnetic resonance (³¹P NMR). Then, a series of flame retardant epoxy composites were prepared by curing the epoxy resins (E-44) with the phosphate esters. The flame retardancy and thermal degradation behaviors of flame retardant epoxy composites were investigated by cone calorimeter test (CCT) and thermogravimetric analysis (TGA), respectively. The results of CCT indicated that phosphate esters can significantly decrease heat release rate, total heat release (THR), and smoke production rate. The sample cured by butyl phosphate ester from phosphorus pentoxide, phosphoric acid and butanol showed the best flame retardant performance among all samples. The TGA results showed that phosphate esters could enhance char residues of flame retardant epoxy composites when compared with those of a composite using T31 as a curing agent at high temperature. It may be concluded that good flame retardant properties of flame retardant epoxy composites are related to the formation of a protective phosphorus-rich char layer. These phosphate esters have a good future on flame retardant epoxy composites.     

Preparation and properties of halogen-free flame retardant epoxy resins with phosphorus-containing siloxanes

Novel epoxy resin modifiers, DOPO–TMDS and DOPO–DMDP were synthesized by addition reaction of divinylsiloxane with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). Halogen-free flame retardant epoxy resins were obtained through modification of o-cresol novolac epoxy resin cured by phenol novolac resin using DOPO–TMDS and DOPO–DMDP which were characterized by ¹H NMR, ¹³C NMR, ³¹P NMR and FT-IR measurements. Effects of the phosphorus-containing siloxanes on thermal stabilities, mechanical properties and flame retardant properties of the epoxy resins were investigated. The cured epoxy resins exhibited better mechanical properties and greatly improved flame retardant properties due to the presence of phosphorus-containing siloxanes. The cured epoxy resins with phosphorus loading of 2.0 wt% showed LOI values of 32–33 and achieved UL94V-0 ratings.     

Synthesis,characterization and thermal properties of novel epoxy/expandable graphite composites

Epoxy resins are widely used as coatings, adhesives and primers and in semiconductor encapsulation. A requirement that has recently gained importance is that of flame resistance, and imparting flame retardancy to epoxy resins has attracted much attention. Expandable graphite (EG) can improve flame‐retardant properties of polymers. Due to poor compatibility between polymer matrix and EG, flame‐retardant performance will be impaired. EG can be functionalized using a coupling agent. This gives rise to covalent bonding between organic and inorganic phases. This will improve the compatibility between filler and polymer to enhance the thermal stability of composites. X‐ray photoelectron spectroscopy was used to characterize the functionalizing reaction between coupling agent and EG. Thermogravimetric analysis (TGA) and integral procedural decomposition temperature (IPDT) were used to calculate the thermal stability of composites. The results show that functionalized EG can improve the thermal stability of the composites. TGA/mass spectroscopy (MS) shows that the amount of toxic gases liberated from the composites is less than that from pure epoxy. Novel epoxy/EG composites were prepared successfully via the sol–gel method. The results of TGA, IPDT and TGA/MS showed that functionalized EG can enhance the thermal stability of composites and can suppress the production of toxic gases. The composite materials could provide a safer choice. Copyright © 2009 Society of Chemical Industry     

Flame Retardant Unsaturated Poly(Ester Amide) Resins Based on Epoxy Resins

ABSTRACT

Novel flame retardant unsaturated poly(ester amide) resins (FR-UPEAs) were prepared by the reaction of brominated epoxy resins (BER) with unsaturated aliphatic bisamic acids using a base catalyst. These FR-UPEAs were characterized by elemental analysis and number average molecular weight determination by non-aqueous conductometric titrations. The curing of these FR-UPEAs was carried out by using benzoyl peroxide (BPO) as a catalyst and was monitored on a differential scanning calorimeter (DSC). Based on DSC data, the glass fiber reinforced composites (i.e., laminates) of these FR-UPEAs have been fabricated and their chemical, mechanical, and electrical properties have been evaluated. The composites were analyzed for their self-extinguishing time. The unreinforced cured samples of FR-UPEAs resins were analyzed thermogravimetrically.     

Polyamide‐enhanced flame retardancy of ammonium polyphosphate on epoxy resin

An attractive intumescent flame retardant epoxy system was prepared from epoxy resin (diglycidyl ether of bisphenol A), low molecular weight polyamide (cure agent, LWPA), and ammonium polyphosphate (APP). The cured epoxy resin was served as carbonization agent as well as blowing agent itself in the intumescent flame retardant formulation. Flammability and thermal stability of the cured epoxy resins with different contents of APP and LWPA were investigated by limited oxygen index (LOI), UL‐94 test, and thermogravimetric analysis (TGA). The results of LOI and UL‐94 indicate that APP can improve the flame retardancy of LWPA‐cured epoxy resins. Only 5 wt % of APP can increase the LOI value of epoxy resins from 19.6 to 27.1, and improve the UL‐94 ratings, reaching V‐0 rating from no rating when the mass ratio of epoxy resin to LWPA is 100/40. It is much interesting that LOI values of flame retardant cured epoxy resins (FR‐CEP) increase with decreasing LWPA. The results of TGA, FTIR, and X‐ray photoelectron spectroscopy (XPS) indicate that the process of thermal degradation of FR‐CEP consists of two main stages: the first stage is that a phosphorus rich char is formed on the surface of the material under 500°C, and then a compact char yields over 500°C; the second stage is that the char residue layer can give more effective protection for the materials than the char formed at the first stage do. The flame retardant mechanism also has been discussed according to the results of TGA, FTIR, and XPS for FR‐CEP. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A P/N synergistic flame retardant containing flexible nitrile group for enhancing the mechanical properties and fire safety of epoxy resins

To further enhance the fire safety of epoxy resins, a phosphorus–nitrogen synergistic flame retardant (DPVHD) with a flexible chain segment and a nitrile group was synthesized. In addition to the traditional flame retardant elements P and N, the flame retardancy of the epoxy composites is further enhanced by the cross-linking effect of the nitrile groups introduced to form an interpenetrating network with the epoxy matrix. The results showed that the sample with 10 wt% DPVHD-10/EP had a LOI of 32.3% and passed the UL-94 V-0 rating, with PHRR and THR reduced by 15.4% and 47%, respectively, compared to pure EP. It is worth noting that the introduction of flexible chain segments improves the flexural properties of the epoxy resin matrix. Compared with pure epoxy, the flexural properties of epoxy-cured compounds with DPVHD addition show a rising trend with the increase of flame-retardant additive. And the rise of DPVHD-10/EP reaches 33.6%, which greatly reduces the negative effect of flame-retardant additives on the mechanical properties of the epoxy resin matrix. This work therefore provides new ideas for exploiting the advantages of phosphorus-nitrogen synergy and nitrile-based cross-linking for flame retardancy in epoxy resins.     

Development of a DOPO‐containing melamine epoxy hardeners and its thermal and flame‐retardant properties of cured products

In this study, a novel Schiff base of melamine used as flame‐retardant curing agent for epoxy resins, was synthesized via condensation reaction of 4‐hydroxybenzaldehyde with melamine, followed by the addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphen‐anthrene 10‐oxide (DOPO) to the resulting imine linkage. The structure of DOPO‐containing melamine Schiff base (P‐MSB) was characterized by Fourier transformed infrared spectroscopy, ¹H‐nuclear magnetic resonance (¹H‐NMR) and ³¹P‐NMR. The compound (P‐MSB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) to prepare flame‐retardant epoxy resins for electronic application. The thermal and flame‐retardant properties of the epoxy resins cured by various equivalent ratios phenol formaldehyde novolac (PN) and P‐MSB were investigated by the nonisothermal differential scanning calorimetry, the thermogravimetric analysis, and limiting oxygen index test. The obtained results showed that the cured epoxy resins possessed high T_g (165°C) and good thermal stability (T_5%, 321°C). Moreover, the P‐MSB/CNE systems exhibited higher limiting oxygen index (35) and more char was maintained in P‐MSB/CNE systems than that in PN/CNE system and the effective synergism of phosphorus–nitrogen indicated their excellent flame retardancy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Characteristics of epoxy resin cured with in situ polymerized curing agent

In order to improve the heat resistance of a cured epoxy resin together with reducing the viscosity of the resin composition, an epoxy resin was cured with a curing agent formed from the radical copolymerization of vinyl monomers during the cure process of the epoxy resin. N-phenylmaleimide and p-acetoxystyrene were used as vinyl monomers of the curing agent. The epoxy resin was cured by the insertion reaction of the ester group of the in situ polymerized curing agent and the epoxy group of the epoxy resin. In the cure system of the epoxy and the phenol resins, reduction of the viscosity of the resin composition was achieved by replacing some or all of the phenol resin with these monomers. When all phenol resins were replaced by these monomers, the viscosity of resin composition (0.01 Pa s at 70 °C) decreased by about 1/2000 compared with that of the system with only phenol resin (21 Pa s at 70 °C). The glass transition temperature (T_g) of the cured resin with no phenols was 174 °C, an improvement of 17 °C compared with that of the system cured with only phenol resin. The flexural strength of the new resins remained unchanged.     

Evaluation of the mechanical properties of sisal–polyester composites as a function of the polyester matrix formulation

In this work a comparative study on the impact and tensile properties of polyester/sisal fiber reinforced composites was undertaken. The polyester matrix was used bare and modified with: (1) a silane coupling agent; (2) a flame retardant system; and (3) a blend of the silane agent and the flame retardant system. The experimental results show that the flame retardant acts as a particulate reinforcement to the polyester matrix and the silane coupling agent acts as a plasticizer. The simultaneous addition of these two compounds to the polyester resin tended to decrease the performance of the composites. The results obtained show that strength or toughness could be tailored, and although none of the composites manufactured with the modified polyester matrices showed a significant improvement on the fiber–matrix interface strength, a better compromise between impact and tensile properties was obtained with the silane modified matrix. The critical fiber volume fraction was also evaluated and shown to be less than 10% for the sisal–polyester composite investigated here. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1209–1217, 2004     

含磷本质阻燃环氧树脂的研究进展

综述了含磷本质阻燃环氧树脂(包括含磷协同本质阻燃体系)的发展、现状和未来趋势。与添加型阻燃剂阻燃环氧树脂相比,通过含磷环氧化合物和/或含磷固化剂把磷元素嵌入环氧树脂结构中制得的含磷本质阻燃环氧树脂,具有阻燃效率高、阻燃持久、物理力学性能不受影响、燃烧过程中毒性腐蚀性挥发物质的生成量低等优势。利用协同阻燃效应,可以进一步提高阻燃性能。但是,含磷本质阻燃环氧树脂和含磷协同本质阻燃体系存在制备工艺复杂、生产成本较高等不足。     

Internal stress control in epoxy resins and their composites by material and process tailoring

The development of internal stress during cure of epoxy and hyperbranched polymer-modified epoxy resins was characterized, taking into account the evolving viscoelastic properties, the volumetric shrinkage due to the chemical reaction, and the thermal expansion. A criterion for void formation during cure in a constrained mold was proposed, providing guidelines for the construction of a process window for manufacturing of void-free composites. It was shown that the internal stress development in epoxy resins during cure is strongly influenced by the presence of hyperbranched polymer modifiers. The role of these modifiers was illustrated for the case of autoclave processing of glass fiber/epoxy composites. This study showed that higher fiber volume fractions could be used with hyperbranched polymer-modified resins than with unmodified resins, for producing void-free laminates. It also appeared that by suitable tailoring of the process cycle, a fully stress-free laminate could be obtained after cure, using the modified resin.     

Simultaneously Improving the Thermal,Flame‐Retardant and Mechanical Properties of Epoxy Resins Modified by a Novel Multi‐Element Synergistic Flame Retardant

To obtain epoxy resins with satisfactory thermal, flame retardant, and mechanical properties, a novel multi‐element synergistic flame retardant (PPVSZ) is synthesized through the reaction between P? H of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and C?C of polysilazane (PVSZ) and utilized as a multi‐element synergistic flame retardant for epoxy resins. The flame retardant mechanism is explored by XPS and SEM, confirming that the excellent flame‐retardance efficiency owes itself to an optimal flame retardant way which jointly exerts the flame‐retardant effects in the gaseous and condensed phase. The thermal properties deduced from DSC, TGA, and DMA, indicate the glass transition temperature, maximum weight loss rate, and char yields at 700 °C for EP‐2 increase by about 5.0 °C, 8.4 °C and 8.8%, respectively. Furthermore, mechanical properties such as impact strength, tensile strength, and flexural strength are also increased by 45.38%, 14.16%, and 17.43%, respectively, which show that the incorporation of PPVSZ does not deteriorate the mechanical properties of modified resin. All the results demonstrate that epoxy resins modified by PPVSZ not only have good effect on the flame retardance, but also have good improvement on thermal and mechanical properties, indicating the potential for applications in many fields requiring fire safety.     

Improving thermal and flame‐retardant properties of epoxy resins by a novel reactive phosphorous‐containing curing agent

In an attempt to improve thermal and flame‐retardant properties of epoxy resins efficiently, a new reactive phosphorus‐containing curing agent called 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐(phenylimino)‐(4‐hydroxyphenyl)me‐thane (DOPO‐PHM) was synthesized and was combined with 4,4′‐diaminodiphenyl methane (DDM) to co‐cure epoxy resins (E51), which covalently incorporated halogen‐free DOPO organ groups into the epoxy networks. The chemical structure of this curing agent was confirmed by FTIR, 1D, and 2D NMR spectra. A reaction mechanism during the preparation was proposed, and the electron effect on the stabilization of the carbocation was discussed. Various DDM/DOPO‐PHM molar ratios were used to get the materials with different phosphorus contents. Their dynamic mechanical, thermal, and flame‐retardant properties were evaluated by dynamic mechanical thermal analysis, thermogravimetric analysis, and limiting oxygen index (LOI) respectively. All samples had a single T_g, showing that these epoxy resins were homogeneous phase for long‐term use in spite of adding DOPO‐PHM. Both char yields (under nitrogen and air atmospheres) increased with the increasing of phosphorus content and the LOI values increased from 24.5 for standard resin to 33.5 for phosphorus‐containing resins, indicating the significant enhancement of thermal stability and flame retardancy. POLYM. ENG. SCI., 54:1192–1200, 2014. © 2013 Society of Plastics Engineers     

A novel rapid cure epoxy resin with internal mold release

Mold preparation, material layup, and cure times for thermoset-based composites often limit their use in high-volume applications. As such, new rapid cure epoxy resins are being developed to achieve a complete cycle time within 3 min. In this research, calorimetry and rheometry are used to examine and model two novel rapid cure epoxy resin systems with internal mold release. The rapid cure epoxy resins followed an autocatalytic cure kinetic and William–Landel–Ferry diffusion model. The rapid cure epoxy resin was shown to achieve 94% cure in 2 min at 150°C. However, adding an additional 2.5 wt% internal mold release hindered the first step of the reaction, which delayed the second reaction step since the final degrees of cure were similar. Furthermore, the resin viscosity followed a modified William–Landel–Ferry equation and at 120°C could maintain a viscosity below 5 Pa s for 4.1 min. These models provided valuable insight into the range of processing conditions these novel resins could experience during impregnation and molding processes.     

Utilizing Vacuum Bagging Process to Prepare Carbon Fiber/CNT-Modified-epoxy Composites with Improved Mechanical Properties

In this work, the effects of carbon nanotube-modified epoxy and carbon nanotube-enriched sizing agent on the tensile properties and failure mode of unidirectional carbon fiber/epoxy composites were investigated. Laminates of carbon fiber/epoxy composites at different concentrations of carbon nanotube and sizing agent were fabricated by hand layup vacuum bagging process. Scanning electron microscopy analysis was conducted to unveil the relation between the macroproperties and the composites’ microstructure. Experimental results showed that the carbon nanotube-modified epoxy/carbon fiber composite showed 20% enhancements in the Young’s modulus compared to the pristine epoxy/carbon fiber composite. The scanning electron microscopy analysis of the fracture surfaces revealed that incorporating carbon nanotube into the epoxy matrix with utilizing the vacuum improves the interfacial bonding and minimizes the voids that act as crack initiators. This microstructure enhances the interfacial shear strength and load transfer between the matrix and the fabrics and consequently the tensile characteristics of the formulated composite.     

Cure kinetics and thermal properties of tetramethylbiphenyl epoxy resin/phthalazinone‐containing diamine/hexa(phenoxy)cyclotriphophazene system

Inherently flame retardant epoxy resin is a kind of halogen‐free material for making high‐performance electronic materials. This work describes an inherently flame retardant epoxy system composed of 4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP), 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐(4‐(4‐aminophenoxy) phenyl) (2H) phthalazin‐1‐one (DAP), and hexa(phenoxy) cyclotriphophazene (HPCTP). The cure kinetics of TMBP/DAP in the presence or absence of HPCTP were investigated using isoconversional method by means of nonisothermal differential scanning calorimeter (DSC). Kinetic analysis results indicated that the effective activation energy (E_α) decreased with increasing the extent of conversion (α) for TMBP/DAP system because diffusion‐controlled reaction dominated the curing reaction gradually in the later cure stage. TMBP/DAP/HPCTP(10 wt %) system had higher E_α values than those of TMBP/DAP system in the early cure stage (α < 0.35), and an increase phenomenon of E_α ～ α dependence in the later cure stage (α ≥ 0.60) due to kinetic‐controlled reaction in the later cure stage. Such complex E_α ～ α dependence of TMBP/DAP/HPCTP(10 wt %) system might be associated with the change of the physical state (mainly viscosity) of the curing system due to the introduction of HPCTP. These cured epoxy resins had very high glass transition temperatures (202–235°C), excellent thermal stability with high 5 wt % decomposition temperatures (>340°C) and high char yields (>25.6 wt %). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Influence of Matrix Properties on Fragmentation Test

Physical aging was used to vary the mechanical properties of model single fiber composites without changing the chemistry at the interface in order to study how property changes affect the measurement of interfacial adhesion by the fragmentation test. The properties of epoxy matrix/AS4 single fiber composites driven to full cure (T_g = 166°C) are altered by annealing below T_g. Neat resin samples with identical thermal histories are tested. All aged panels show roughly the same embrittlement with aging characterized by an average 30% decrease in tensile failure strain and 7.3% increase in compressive yield relative to quenched samples. Fragmentation results indicated no change between aged and quenched samples. Results are discussed in terms of micromechanics models for the fragmentation test. Strain at fragmentation increased with aging. This was related to the residual stress state in the model composite and the possibility of the zero stress state of the single fiber composites increasing with thermal annealing.     

不同POSS对磷⁃硅协同阻燃环氧树脂性能的影响

将两种多面体低聚倍半硅氧烷(POSS)分别与9,10-二氢-9-氧杂-10-磷杂菲-10-氧化物(DOPO)基有机磷阻燃剂(D-bp)复配,制备了磷-硅协同阻燃环氧树脂,并对其阻燃、热、力学和动态力学性能等进行分析.结果表明,在磷含量仅为0.25％(质量分数,下同)时,磷-硅协同阻燃环氧树脂就能达到UL 94 V-0级...     

Preparation,characterization and properties of a halogen‐free phosphorous flame‐retarded poly(butylene terephthalate) composite based on a DOPO derivative

A phosphorous flame retardant (DOPO‐MAH) was synthesized through the reaction between of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) and maleic anhydride (MAH) and confirmed by FT‐IR, ¹H NMR, and ³¹P NMR techniques. The obtained flame retardant was then melt blended with poly(butylene terephthalate) (PBT) to prepare flame retardant PBT/DOPO‐MAH composites. The composites were characterized by LOI, UL‐94, and mechanical tests as well as scanning electron microscopy, thermogravimetric analysis, and differential scanning calorimetry analysis. On adding 20 wt % DOPO‐MAH, LOI increased from 20.9 to 25.7 and the UL‐94 V‐0 rating was achieved, whereas the tensile and flexural properties were notably improved. Torque‐time profile during the melt blending and intrinsic viscosity of the composite indicated that DOPO‐MAH acted as both flame retardant and chain extender for the PBT matrix. The results showed that PBT/DOPO‐MAH composite is a promising material for its good comprehensive properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1301‐1307, 2013     

Effectiveness of carbon microcoils as a reinforcing material for a polymer matrix

Spring-shaped carbon microcoils (CMCs) were embedded in epoxy resins to form CMC/epoxy resin composites. The mechanical properties of the composites were examined and compared with those of conventional straight carbon fiber (CF) /epoxy resin composites. CMCs were found to be more effective than CFs as a reinforcing material for the epoxy resin having a low Young’s modulus (0.54 MPa). SEM images of the fractured cross-sections of the composite revealed that CMCs were not pulled out from the resin matrix but fractured with the matrix. This could be ascribed to the unique conformations of CMCs.