冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

加拿大国家档案馆珍藏概览(5)——镜头中的加拿大

1989年是照片诞生后的第150周年.自从第一次将光影与化学结合起来用于从大自然中获得永恒的图片后,自然风光摄影就倍受争议.不管怎样,无论艺术还是科学,技艺还是职业,摄影都是产生于客观性与选择性之间,创造性与现实性之上的一种档案媒介.在最新的一次统计后,国家档案馆现今保存有1500万以上的照片档案.不管是百年前拍摄的还是上个星期刚刚拍摄的,照片所要传递出的要素通常是些非常独特的信息.无论照片、底片和幻灯片,是黑白的还是彩色的,无论旧与新,不管是退色了的还是色彩艳丽的,单独的还是成集合的,最为关键的是它们都见证了加拿大历史与社会的发展与兴衰.     

9.3大阅兵:高标准让军魂荡气回肠

<正>阅兵是展示辉煌的时刻,而为这一辉煌采取的所有的标准,不啻也是宝贵的财富,应当成为践行标准的榜样……这个月最令人难忘、最引人自豪、最提振国威的事情,当属"9.3"大阅兵,它有着以往没有的多重的亮点:首次以纪念抗日战争暨世界反法西斯战争胜利为阅兵主题,彰显维护和平是全世界人民共同的愿望。首次邀请外国军队代表参加分列式,体现纪念大会的国际性。首次组织抗战老兵包括国民党老兵参加,体现了对历史的尊重,体现全民族抗战的特色。首次编组英模部队方队受阅,展示中国共产党在抗战中定海     

云冈遗韵

<正>云冈石窟,历经1540年的人间风雨而硕立至今的那种坚强、博爱与宽容的佛国神界!这净25米高的崖壁上蜂窝般开凿出的是人间的奇迹,人类的智慧,     

分光光度计使用维护的注意事项

一、分光光度计检定的主要项目对分析结果的影响 1.波长准确度 分光光度法必须对应于样品吸收光谱中的某一个吸收峰的波长.但由于仪器本身存在的误差和不同的人员进行测量时产生的误差,单色光的实际波长与仪器的波长读数值之间会存在一定的误差.     

乡野如画醉金秋

秋天在不经意间早已悄然远去,留下的是那金色的记忆。乡野的秋色金灿灿。柿子树上硕果累累,红红火火的柿子和层次分明、错落有致的黑色枝干在弥漫的烟雾中若隐若现、飘逸洒脱,宛如一幅写意的国画。     

国内外仪器指标的接轨与合格判断

随着科学技术的发展和科研任务的需要,测量仪表的使用大幅度增加,因此检定的任务量也随之大幅攀升.其中国外仪表占了很大的比重,但在仪器技术指标的表达方式上国外各个厂家不尽相同,与国内计量术语和仪器技术指标的表达方式更是存在较大的差异,这对于仪器的使用和计量检定的合格性判断是一个重要的问题,关系到购置仪器的验收与使用,进而关系到科研任务的质量保障.     

甲醛气体传感器研究进展

甲醛是室内空气的主要污染物之一,随着人们对室内空气污染的日益关注,对甲醛的准确及时检测显得更加重要.目前检测甲醛气体最为快速的方法就是传感器法.在综合分析了国内外甲醛气体传感器的研究现状的基础上,着重就测定甲醛的电化学传感器、基于化学发光的传感器、金属氧化物传感器、电子鼻、声表面波传感器的特性进行了阐述与剖析,指出了甲醛气体传感器存在的问题,并预测了其发展趋势.     

垂直距离聚类的Lagrange乘子定界问题

求解1 维空间的一点到二次曲面的距离是基于聚类的模式识别的一个难题.后者在航天器激光威胁告警中具有重要的应用.本文证明在A的特征根相同的情况下如此的代数方程仅有一个根,并给出求解此根的迭代算法.在A的特征根同号的情形下给出Lagrange乘子的上下界,对于采用二分法求解Lagrange乘子提供了可能和便利.该问题的解决为激光探测和激光告警提供了一种新的途径.     

探索消除用砂芯滤膜测定悬浮物时负值问题的方法

用砂芯滤膜测定悬浮物时,操作方式.膜的质量,烘干的时问及冷却的时间都对测定结果的影响,由于实验室测量时悬浮物的质量很小,在测量中各种偶然误差和系统误差常常使测出的结果产生负值.本文通过实验探索消除负值的方法.     

Insertion of triangulated surfaces into a meccano tetrahedral discretization by means of mesh refinement and optimization procedures

In this paper, we present a new method for inserting several triangulated surfaces into an existing tetrahedral mesh generated by the meccano method. The result is a conformal mesh where each inserted surface is approximated by a set of faces of the final tetrahedral mesh. First, the tetrahedral mesh is refined around the inserted surfaces to capture their geometric features. Second, each immersed surface is approximated by a set of faces from the tetrahedral mesh. Third, following a novel approach, the nodes of the approximated surfaces are mapped to the corresponding immersed surface. Fourth, we untangle and smooth the mesh by optimizing a regularized shape distortion measure for tetrahedral elements in which we move all the nodes of the mesh, restricting the movement of the edge and surface nodes along the corresponding entity they belong to. The refining process allows approximating the immersed surface for any initial meccano tetrahedral mesh. Moreover, the proposed projection method avoids computational expensive geometric projections. Finally, the applied simultaneous untangling and smoothing process delivers a high‐quality mesh and ensures that the immersed surfaces are interpolated. Several examples are presented to assess the properties of the proposed method.     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Flow calorimeter for enthalpy increment measurements on condensed gases

A flow calorimeter for enthalpy increment measurements on condensed gases is presented. A better knowledge of the properties of the liquefied natural gas is needed, and therefore a liquid loop has been designed for our flow calorimeter. The fluid loop in the calorimeter is designed in order to avoid the two-phase region, since two phases would give compositional disturbances in the measurements. The avoidance of the two-phase region is made possible by increasing the pressure of the test fluid after the measurement section, then heating the fluid at super-critical pressure past the critical point. Finally, the fluid is throttled to the low-pressure gas state at the inlet condition of the compressor that circulates the fluid. To perform the pressure increase, a new cryogenic pump has been designed. To evaluate the new equipment, measurements were taken on liquid ethane over the temperature range 146–256 K at pressure between 0.9 and 5.1 MPa.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Refrigerators Enter a New Era of Health Preservation Frestech initiates the establishment of China's first standard for household sterilization refrigerators

On November 30, 2007, the China Association for Standardization (CAS) held a press conference at Beijing Diaoyutai State Guest House. Leaders from the China Household Electric Appliance Research Institute, the China Household Electric Appliance Association, and the China Consumers' Association attended and made speeches.……     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.