Influence of CO2 and H2O on NOx storage and reduction on a Pt–Ba/γ-Al2O3 catalyst

In this paper, the effect of CO₂ and H₂O on NO_x storage and reduction over a Pt–Ba/γ-Al₂O₃ (1 wt.% Pt and 30 wt.% Ba) catalyst is shown. The experimental results reveal that in the presence of CO₂ and H₂O, NO_x is stored on BaCO₃ sites only. Moreover, H₂O inhibits the NO oxidation capability of the catalyst and no NO₂ formation is observed. Only 16% of the total barium is utilized in NO storage. The rich phase shows 95% selectivity towards N₂ as well as complete regeneration of stored NO. In the presence of CO₂, NO is oxidized into NO₂ and more NO_x is stored as in the presence of H₂O, resulting in 30% barium utilization. Bulk barium sites are inactive in NO_x trapping in the presence of CO₂·NH₃ formation is seen in the rich phase and the selectivity towards N₂ is 83%. Ba(NO₃)₂ is always completely regenerated during the subsequent rich phase. In the absence of CO₂ and H₂O, both surface and bulk barium sites are active in NO_x storage. As lean/rich cycling proceeds, the selectivity towards N₂ in the rich phase decreases from 82% to 47% and the N balance for successive lean/rich cycles shows incomplete regeneration of the catalyst. This incomplete regeneration along with a 40% decrease in the Pt dispersion and BET surface area, explains the observed decrease in NO_x storage.     

Multifunctional catalysts for de-NOx processes: The case of H3PW12O40·6H2O-metal supported on mixed oxides

The role of a multifunctional catalyst for de-NO_x process has been investigated. The NO_x storage capacity of H₃PW₁₂O₄₀·6H₂O (HPW) was improved by the presence of a noble metal (Pt, Rh or Pd). Both HPW and noble metal were deposited on a specific support (based on Zr–Ce or Zr–Ti). The presence of noble metal in several oxidation states, as evidenced by TPR and IR, involves the possibility of forming different catalytic sites: (i) M⁰ (zero-valent metal) and perhaps (ii) (metal–H)^δ+ from specific interactions between noble metal and the HPW proton. Supports were also able to adsorb and activate NO_x and to generate cationic catalytic sites (M^x+). These cationic sites seem to be the clue for their important activity toward NO_x reduction. This catalyst presents an outstanding resistance to SO₂ poisoning which can be related to NO and NO₂ absorption mechanism in HPW. The use of alternating short cycles of lean/rich mixtures allows us optimising the performance of this catalytic system in terms of both NO_x reduction capacity and NO_x storage efficiency: up to 48 and 84%, respectively (with a 2% CO + 1% H₂ mixture for reducing). Experimental results sustain two hypotheses: first, HPW-metal-support catalyst includes several (independent) catalytic functions required for a de-NO_x process to occur and second, the formation of oxygenate active species must be indispensable for NO_x reduction into nitrogen.     

Transient behaviour of catalytic monolith with NOx storage capacity

Transient behaviour of catalytic monolith converter with NO_x storage is studied under conditions typical for automobiles with lean-burn engines (i.e., diesel and advanced gasoline ones). Periodical alternation of inlet concentrations is applied—NO_x are adsorbed on the catalyst surface during a long reductant-lean phase (2–3 min) and then reduced to N₂ within a short reductant-rich phase (2–6 s). Samples of industrial NO_x storage and reduction catalyst of NM/Ba/CeO₂/γ-Al₂O₃ type (NM = noble metal), washcoated on 400 cpsi cordierite substrate, are used in the study. Effects of the rich-phase length and composition on the overall NO_x conversions are examined experimentally. Reduction of NO_x by CO, H₂ and unburned hydrocarbons (represented by C₃H₆) in the presence of CO₂ and H₂O is considered.

Effective, spatially 1D, heterogeneous mathematical model of catalytic monolith with NO_x and oxygen storage capacity is described. The minimum set of experiments needed for the evaluation of relevant reaction kinetic parameters is discussed: (i) CO, H₂ and HC oxidation light-off under both lean and rich conditions, including inhibition effects, (ii) NO/NO₂ transformation, (iii) NO_x storage, including temperature dependence of effective NO_x storage capacity, (iv) water gas shift and steam reforming under rich conditions, i.e., in situ production of hydrogen, (v) oxygen storage and reduction, including temperature dependence of effective oxygen storage capacity, and (vi) NO_x desorption and reduction under rich conditions. The experimental data are compared with the simulation results.     

Lean NOx reduction with CO + H2 mixtures over Pt/Al2O3 and Pd/Al2O3 catalysts

The reduction of NO_x by hydrogen under lean burn conditions over Pt/Al₂O₃ is strongly poisoned by carbon monoxide. This is due to the strong adsorption and subsequent high coverage of CO, which significantly increases the temperature required to initiate the reaction. Even relatively small concentrations of CO dramatically reduce the maximum NO_x conversions achievable. In contrast, the presence of CO has a pronounced promoting influence in the case of Pd/Al₂O₃. In this case, although pure H₂ and pure CO are ineffective for NO_x reduction under lean burn conditions, H₂/CO mixtures are very effective. With a realistic (1:3) H₂:CO ratio, typical of actual exhaust gas, Pd/Al₂O₃ is significantly more active than Pt/Al₂O₃, delivering 45% NO_x conversion at 160 °C, compared to >15% for Pt/Al₂O₃ under identical conditions. The nature of the support is also critically important, with Pd/Al₂O₃ being much more active than Pd/SiO₂. Possible mechanisms for the improved performance of Pd/Al₂O₃ in the presence of H₂+CO are discussed.     

Catalytic reduction of NOx with H2/CO/CH4 over PdMOR catalysts

Conversion of NO_x with reducing agents H₂, CO and CH₄, with and without O₂, H₂O, and CO₂ were studied with catalysts based on MOR zeolite loaded with palladium and cerium. The catalysts reached high NO_x to N₂ conversion with H₂ and CO (>90% conversion and N₂ selectivity) range under lean conditions. The formation of N₂O is absent in the presence of both H₂ and CO together with oxygen in the feed, which will be the case in lean engine exhaust. PdMOR shows synergic co-operation between H₂ and CO at 450–500 K. The positive effect of cerium is significant in the case of H₂ and CH₄ reducing agent but is less obvious with H₂/CO mixture and under lean conditions. Cerium lowers the reducibility of Pd species in the zeolite micropores. The catalysts showed excellent stability at temperatures up to 673 K in a feed with 2500 ppm CH₄, 500 ppm NO, 5% O₂, 10% H₂O (0–1% H₂), N₂ balance but deactivation is noticed at higher temperatures. Combining results of the present study with those of previous studies it shows that the PdMOR-based catalysts are good catalysts for NO_x reduction with H₂, CO, hydrocarbons, alcohols and aldehydes under lean conditions at temperatures up to 673 K.     

Catalytic oxidation of HCN over a 0.5% Pt/Al2O3 catalyst

The adsorption of HCN on, its catalytic oxidation with 6% O₂ over 0.5% Pt/Al₂O₃, and the subsequent oxidation of strongly bound chemisorbed species upon heating were investigated. The observed N-containing products were N₂O, NO and NO₂, and some residual adsorbed N-containing species were oxidized to NO and NO₂ during subsequent temperature programmed oxidation. Because N-atom balance could not be obtained after accounting for the quantities of each of these product species, we propose that N₂ and was formed. Both the HCN conversion and the selectivity towards different N-containing products depend strongly on the reaction temperature and the composition of the reactant gas mixture. In particular, total HCN conversion reaches 95% above 250 °C. Furthermore, the temperature of maximum HCN conversion to N₂O is located between 200 and 250 °C, while raising the reaction temperature increases the proportion of NO_x in the products. The co-feeding of H₂O and C₃H₆ had little, if any effect on the total HCN conversion, but C₃H₆ addition did increase the conversion to NO and decrease the conversion to NO₂, perhaps due to the competing presence of adsorbed fragments of reductive C₃H₆. Evidence is also presented that introduction of NO and NO₂ into the reactant gas mixture resulted in additional reaction pathways between these NO_x species and HCN that provide for lean-NO_x reduction coincident with HCN oxidation.     

Simulation of NO and NO2 sorption–desorption–reduction behaviours on Pt-impregnated HPW supported on TiO2

NO and NO₂ (NO_x) sorption, desorption and reduction by hydrogen, carbon monoxide and/or propene were investigated on a TiO₂-supported heteropolyacid, 12-tungstophosphoric acid hexahydrate (HPW), promoted by platinum. A model taking into account NO_x sorption, desorption and reduction was established. Kinetic constants for NO_x sorption, desorption and reduction were extracted by modelling for the investigated range of temperature (170–300 °C).     

Regeneration of NOx trap catalysts

We have investigated the regeneration of a nitrated or sulphated model Pt/Ba-based NO_x trap catalyst using different reductants. H₂ was found to be more effective at regenerating the NO_x storage activity especially at lower temperature, but more importantly over the entire temperature window after catalyst ageing. When the model NO_x storage catalyst is sulphated in SO₂ under lean conditions at 650 °C almost complete deactivation can be seen. Complete regeneration was not achieved, even under rich conditions at 800 °C in 10% H₂/He. Barium sulphate formed after the high temperature ageing was partly converted to barium sulphide on reduction. However, if the H₂ reduced sample was exposed to a rich condition in a gas mixture containing CO₂ at 650 °C, the storage activity can be recovered. Under these rich conditions the S²⁻ species becomes less stable than the CO₃²⁻, which is active for storing NO_x. Samples which were lean aged in air containing 60 ppm SO₂ at <600 °C, after regeneration at λ=0.95 at 650 °C, have a similar activity window to a fresh catalyst. It is, therefore, important that CO₂ is present during the rich regenerations of the sulphated model samples (as of course it would be under real conditions), as suppression of carbonate formation can lead to sulphide formation which is inactive for NO_x storage.     

Insight into the key aspects of the regeneration process in the NOx storage reduction (NSR) reaction probed using fast transient kinetics coupled with isotopically labelled NO over Pt and Rh-containing Ba/Al2O3 catalysts

For the first time, the coupling of fast transient kinetic switching and the use of an isotopically labelled reactant (¹⁵NO) has allowed detailed analysis of the evolution of all the products and reactants involved in the regeneration of a NO_x storage reduction (NSR) material. Using realistic regeneration times (ca. 1 s) for Pt, Rh and Pt/Rh-containing Ba/Al₂O₃ catalysts we have revealed an unexpected double peak in the evolution of nitrogen. The first peak occurred immediately on switching from lean to rich conditions, while the second peak started at the point at which the gases switched from rich to lean. The first evolution of nitrogen occurs as a result of the fast reaction between H₂ and/or CO and NO on reduced Rh and/or Pt sites. The second N₂ peak which occurs upon removal of the rich phase can be explained by reaction of stored ammonia with stored NO_x, gas phase NO_x or O₂. The ammonia can be formed either by hydrolysis of isocyanates or by direct reaction of NO and H₂.

The study highlights the importance of the relative rates of regeneration and storage in determining the overall performance of the catalysts. The performance of the monometallic 1.1%Rh/Ba/Al₂O₃ catalyst at 250 and 350 °C was found to be dependent on the rate of NO_x storage, since the rate of regeneration was sufficient to remove the NO_x stored in the lean phase. In contrast, for the monometallic 1.6%Pt/Ba/Al₂O₃ catalyst at 250 °C, the rate of regeneration was the determining factor with the result that the amount of NO_x stored on the catalyst deteriorated from cycle to cycle until the amount of NO_x stored in the lean phase matched the NO_x reduced in the rich phase. On the basis of the ratio of exposed metal surface atoms to total Ba content, the monometallic 1.6%Pt/Ba/Al₂O₃ catalyst outperformed the Rh-containing catalysts at 250 and 350 °C even when CO was used as a reductant.     

An examination of the role of plasma treatment for lean NOx reduction over sodium zeolite Y and gamma alumina Part 1. Plasma assisted NOx reduction over NaY and Al2O3

The role of plasma processing on NO_x reduction over γ-alumina and a basic zeolite, NaY was examined. During the plasma treatment NO is oxidized to NO₂ and propylene is partially oxidized to CO, CO₂, acetaldehyde, and formaldehyde. With plasma treatment, NO as the NO_x gas, and a NaY catalyst, the maximum NO_x conversion was 70% between 180 and 230 °C. The activity decreased at higher and lower temperatures.

As high as 80% NO_x removal over gamma alumina was measured by a chemiluminescent NO_x meter with plasma treatment and NO as the NO_x gas.

For both catalysts a simultaneous decrease in NO_x and aldehydes concentrations was observed, which suggests that aldehyde may be important components for NO_x reduction in plasma-treated exhaust.     

Transient analysis of the release and reduction of NOx using a Pt/Ba/Al2O3 catalyst

The release and reduction of NO_x in a NO_x storage-reduction (NSR) catalyst were studied with a transient reaction analysis in the millisecond range, which was made possible by the combination of pulsed injection of gases and time resolved time-of-flight mass spectrometry. After an O₂ pulse and a subsequent NO pulse were injected into a pellet of the Pt/Ba/Al₂O₃ catalyst, the time profiles of several gas products, NO, N₂, NH₃ and H₂O, were obtained as a result of the release and reduction of NO_x caused by H₂ injection. Comparing the time profiles in another analysis, which were obtained using a model catalyst consisting of a flat 5 nmPt/Ba(NO₃)₂/cordierite plate, the release and reduction of NO_x on Pt/Ba/Al₂O₃ catalyst that stored NO_x took the following two steps; in the first step NO molecules were released from Ba and in the second step the released NO was reduced into N₂ by H₂ pulse injection. When this H₂ pulse was injected in a large amount, NO was reduced to NH₃ instead of N₂.

A only small amount of H₂O was detected because of the strong affinity for alumina support. We can analyze the NO_x regeneration process to separate two steps of the NO_x release and reduction by a detailed analysis of the time profiles using a two-step reaction model. From the result of the analysis, it is found that the rate constant for NO_x release increased as temperature increase.     

Quantified NOx adsorption on Pt/K/gamma-Al2O3 and the effects of CO2 and H2O

A multi-component NO_x-trap catalyst consisting of Pt and K supported on γ-Al₂O₃ was studied at 250 °C to determine the roles of the individual catalyst components, to identify the adsorbing species during the lean capture cycle, and to assess the effects of H₂O and CO₂ on NO_x storage. The Al₂O₃ support was shown to have NO_x trapping capability with and without Pt present (at 250 °C Pt/Al₂O₃ adsorbs 2.3 μmols NO_x/m²). NO_x is primarily trapped on Al₂O₃ in the form of nitrates with monodentate, chelating and bridged forms apparent in Diffuse Reflectance mid-Infrared Fourier Transform Spectroscopy (DRIFTS) analysis. The addition of K to the catalyst increases the adsorption capacity to 6.2 μmols NO_x/m², and the primary storage form on K is a free nitrate ion. Quantitative DRIFTS analysis shows that 12% of the nitrates on a Pt/K/Al₂O₃ catalyst are coordinated on the Al₂O₃ support at saturation.

When 5% CO₂ was included in a feed stream with 300 ppm NO and 12% O₂, the amount of K-based nitrate storage decreased by 45% after 1 h on stream due to the competition of adsorbed free nitrates with carboxylates for adsorption sites. When 5% H₂O was included in a feed stream with 300 ppm NO and 12% O₂, the amount of K-based nitrate storage decreased by only 16% after 1 h, but the Al₂O₃-based nitrates decreased by 92%. Interestingly, with both 5% CO₂ and 5% H₂O in the feed, the total storage only decreased by 11%, as the hydroxyl groups generated on Al₂O₃ destabilized the K–CO₂ bond; specifically, H₂O mitigates the NO_x storage capacity losses associated with carboxylate competition.     

Storage of NO2 on BaO/TiO2 and the influence of NO

The influence of NO on the adsorption and desorption of NO₂ on BaO/TiO₂ has been studied under lean conditions. The adsorption of NO₂ involves the disproportionation of NO₂ into an adsorbed nitrate species and NO released to the gas phase with a 3:1 ratio,

BaO+3NO₂→NO+Ba(NO₃)₂.

Three different nitrate species form on the catalyst: surface nitrates on the TiO₂ support, surface nitrates on BaO, and bulk barium nitrate. The stability of the three species in different gas feeds was investigated by temperature-programmed desorption (TPD).

The reverse reaction of the NO₂ disproportionation has also been observed. If NO is added to the feed, nitrates previously formed on the sorbent will decompose into NO₂. Therefore, the above chemical equation should be considered as an equilibrium reaction. Applying this finding to the NO_x storage and reduction catalyst means that NO probably reacts with the previously formed nitrates yielding NO₂ as an intermediate product. This NO₂ is subsequently reduced by the reducing agents (hydrocarbons and CO) present during the regeneration period.     

The effect of hydrogen on the selective catalytic reduction of NO in excess oxygen over Ag/Al2O3

The selective catalytic reduction (SCR) of nitrogen oxides (NO_x) by propane in the presence of H₂ on sol–gel prepared Ag/Al₂O₃ catalysts (0.5–5 wt.% Ag) was investigated. It was confirmed that hydrocarbon-assisted SCR of NO_x is remarkably enhanced by co-feeding hydrogen to a lean exhaust gas mixture (λ>1), attaining considerable activity within a wide temperature window (470–825 K). The samples had marginal activity at 575 K without co-fed H₂, but achieved up to 60% NO_x conversion in the presence of H₂ at a space velocity of 30,000 h⁻¹. NO₂ as NO_x feed component is not converted to N₂ by C₃H₈ to a substantial extent under lean conditions. This points to an activation route of NO through direct conversion to adsorbed nitrite/nitrate or to a dissociation of NO over Ag⁰, formed through short-term reduction by H₂. The nature of Ag species was characterized by X-ray diffraction, temperature-programmed reduction, pulse thermoanalytical measurements, electron microscopy and FTIR spectroscopy. It could be shown that Ag₂O nano-sized clusters are predominantly present on all samples, whereas formation of silver aluminate could not be confirmed. Nano-sized Ag₂O clusters can reversibly be reduced/reoxidized by H₂. A silver loading higher than 2 wt.% leads to a part of Ag₂O particles, which are thermally decomposed during calcination at 800 K or higher. The catalytic role of this metallic silver is still unclear. Formal kinetic analysis of catalytic data revealed that the activation energy of the overall reaction is significantly lowered in the presence of H₂. The presence of water does not change the activation energy. It is concluded that hydrogen reduces the nano-sized Ag₂O clusters to Ag⁰ on a short-term scale. Zero-valent silver promotes a dissociation pathway of NO_x conversion. The fact that more oxidized ad-species (nitrite/nitrate) are observed in the presence of H₂ is attributed to a dissociative activation of gas-phase oxygen on Ag⁰.     

Investigations of sulphur deactivation of NOx storage catalysts: influence of sulphur carrier and exposure conditions

The influence of SO₂, H₂S and COS in low concentrations on the deactivation of Pt/Rh/BaO/Al₂O₃ NO_x storage catalysts was investigated. Different samples of the catalyst were exposed to synthetic gas mixtures mimicking lean/rich engine cycling in a mixed lean application at 400 °C. The lean gas mixture contained 8 vol.% O₂, 500 vol-ppm C₃H₆ and 400 vol-ppm NO balanced to 100 vol.% with Ar. The rich excursions were performed by switching off the oxygen supply. Sulphur, 25 vol-ppm of either SO₂, H₂S or COS, was added to the gas flow either during the lean, the rich or both periods. This procedure aimed at investigating the influence of the exposure conditions and therefore the lean and rich periods were kept equally long (5 min). In addition, thermodynamical calculations for the prevailing conditions were performed.

It was concluded that all sulphur compounds investigated, i.e. SO₂, H₂S and COS, had similar, negative impact on the NO_x storage ability of the catalyst and that they all showed increased deactivation rates during rich exposure compared to lean. During lean exposure, all sulphur carriers showed similar behaviour, while H₂S and COS caused severe loss of noble metal activity during rich exposure.     

Impact of redox conditions on thermal deactivation of NOx traps for diesel

Performance of NO_x traps after high-temperature treatments in different redox environments was studied. Two types of treatments were considered: aging and pretreatment. Lean and rich agings were examined for a model NO_x trap, Pt–Ba/Al₂O₃. These were done at 950 °C for 3 h, in air and in 1% H₂/N₂, respectively. Lean aging had a severe impact on NO_x trap performance, including HC and CO oxidation, and NH₃ and N₂O formation. Rich aging had minimal impact on performance, compared to fresh/degreened performance. Deactivation from lean aging was essentially irreversible due to Pt sintering, but Pt remained dispersed with the rich aging. Pretreatments were examined for a commercially feasible fully formulated NO_x trap and two model NO_x traps, Pt–Ba/Al₂O₃ and Pt–Ba–Ce/Al₂O₃. Pretreatments were done at 600 °C for 10 min, and used feed gas that simulated diesel exhaust under several conditions. Lean pretreatment severely suppressed NO_x, HC, CO, NH₃ and N₂O activities for the ceria-containing NO_x traps, but had no impact on Pt–Ba/Al₂O₃. Subsequently, a relatively mild rich pretreatment reversed this deactivation, which appears to be due to a form of Pt–ceria interaction, an effect that is well known from early work on three-way catalysts. Practical applications of results of this work are discussed with respect to NO_x traps for light-duty diesel vehicles.     

The low-temperature performance of NOx storage and reduction catalyst

The catalytic performance and the behavior of NO_x storage and reduction (NSR) over a model catalyst for lean-burn gasoline engines have been mainly investigated and be discussed based on the temperature and reducing agents use in this study. The experimental results have shown that the NO_x storage amount in the lean atmosphere was the same as the NO_x reduction amount from the subsequent rich spike (RS) above the temperature of 400 °C, while the former was greater than the latter below the temperature of 400 °C. This indicated that when the temperature was below 400 °C compared with the NO_x storage stage, the reduction of the stored NO_x is somehow restricted. We found that the reduction efficiencies with the reducing agents decrease in the order H₂ > CO > C₃H₆ below 400 °C, thus not all of the NO_x storage sites could be fully regenerated even using an excessive reducing agent of CO or C₃H₆, which was supplied to the NSR catalyst, while all the NO_x storage sites could be fully regenerated if an adequate amount of H₂ was supplied. We also verified that the H₂ generation more favorably occurred through the water gas shift reaction than through the steam reforming reaction. This difference in the H₂ generation could reasonably explain why CO was more efficient for the reduction of the stored NO_x than C₃H₆, and hinted as a promising approach to enhance the low-temperature performance of the current NSR catalysts though promoting the H₂ generation reaction.     

An examination of the role of plasma treatment for lean NOx reduction over sodium zeolite Y and gamma alumina Part 2: Formation of nitrogen

NO_x reduction with NO₂ as the NO_x gas in the absence of plasma was compared to plasma treated lean NO_x exhaust where NO is converted to NO₂ in the plasma. Product nitrogen was measured to prove true chemical reduction of NO_x to N₂. With plasma treatment, NO as the NO_x gas, and a NaY catalyst, the maximum conversion to nitrogen was 50% between 180 and 230 °C. The activity decreased at higher and lower temperatures. At 130 °C a complete nitrogen balance could be obtained, however between 164 and 227 °C less than 20% of the NO_x is converted to a nitrogen-containing compound or compounds not readily detected by gas chromatograph (GC) or Fourier transform infrared spectrometer (FT-IR) analysis. With plasma treatment, NO₂ as the NO_x gas, and a NaY catalyst, a complete nitrogen balance is obtained with a maximum conversion to nitrogen of 55% at 225 °C.

For γ-alumina, with plasma treatment and NO₂ as the NO_x gas, 59% of the NO_x is converted to nitrogen at 340 °C. A complete nitrogen balance was obtained at these conditions. As high as 80% NO_x removal over γ-alumina was measured by a chemiluminescent NO_x meter with plasma treatment and NO as the NO_x gas.

When NO is replaced with NO₂ and the simulated exhaust gases are not plasma treated, the maximum NO_x reduction activity of NaY and γ-alumina decreases to 26 and 10%, respectively. This is a large reduction in activity compared to similar conditions where the simulated exhaust was plasma treated. Therefore, in addition to NO₂, other plasma-generated species are required to maximize NO_x reduction.     

SCR of NOx with CH3OH on H-mordenite: mechanism and reaction intermediates

The selective reduction of NO_x over H-mordenite (H-m) was studied using CH₃OH as reducing agent. Results are compared with those obtained with other conventional reducing agents (ethylene and methane), with gas-phase reactions, and with other metal-exchanged mordenites (Cu-mordenite (Cu-m) and Co-mordenite (Co-m)). H-m was found to be an effective catalyst for the SCR of NO_x with CH₃OH. When different reducing agents were compared over H-m, CH₃OH > C₂H₄ > CH₄ was the order according to the maximum NO conversion obtained using 1% of oxygen in the feed. Instead, if selectivity is considered, the order results CH₄ > CH₃OH > C₂H₄. In reaction experiments, two distinct zones defined by two maxima with NO to N₂ conversion are obtained at two different temperatures. A correlation exists between the said zones and the CO : CO₂ ratio. At low temperatures, CO prevails whereas at high temperatures CO₂ prevails. These results indicate that there exist different reaction intermediates. Evidence from reaction experiments, FTIR results, and transient experiments suggest that the reaction mechanism involves formaldehyde and dimethyl ether (DME) as intermediates in the 200–500°C temperature range. The surface interaction between CH₃OH (or its decomposition products) and NO is negligible if compared with NO₂, indicating that the oxidation of NO to NO₂ on acid sites is a fundamental path in this system. Different from other non-oxygenated reductants (methane and ethylene), a gas-phase NO_x initiation effect on hydrocarbon combustion was not observed.     

Influence of NO2 on the selective catalytic reduction of NO with ammonia over Fe-ZSM5

The influence of NO₂ on the selective catalytic reduction (SCR) of NO with ammonia was studied over Fe-ZSM5 coated on cordierite monolith. NO₂ in the feed drastically enhanced the NO_x removal efficiency (DeNOx) up to 600 °C, whereas the promoting effect was most pronounced at the low temperature end. The maximum activity was found for NO₂/NO_x = 50%, which is explained by the stoichiometry of the actual SCR reaction over Fe-ZSM5, requiring a NH₃:NO:NO₂ ratio of 2:1:1. In this context, it is a special feature of Fe-ZSM5 to keep this activity level almost up to NO₂/NO_x = 100%. The addition of NO₂ to the feed gas was always accompanied by the production of N₂O at lower and intermediate temperatures. The absence of N₂O at the high temperature end is explained by the N₂O decomposition and N₂O-SCR reaction. Water and oxygen influence the SCR reaction indirectly. Oxygen enhances the oxidation of NO to NO₂ and water suppresses the oxidation of NO to NO₂, which is an essential preceding step of the actual SCR reaction for NO₂/NO_x < 50%. DRIFT spectra of the catalyst under different pre-treatment and operating conditions suggest a common intermediate, from which the main product N₂ is formed with NO and the side-product N₂O by reaction with gas phase NO₂.