共查询到20条相似文献,搜索用时 328 毫秒
1.
车辆的转向特性与阿卡曼转向原理的分析 总被引:2,自引:0,他引:2
对车辆的转向原理、转向特性及阿卡曼转向几何原理进行分析,并论述车辆转向特性与道路交通安全的关系.提出转向原理与特性是驾驶员和行人应掌握的科学常识. 相似文献
2.
《机械制造与自动化》2016,(5):167-170
直线压缩机拥有结构紧凑、体积与噪声小和高效节能的特点,为了将其优点充分发挥出来,需要一个针对直线压缩机合理控制策略。以一款永磁动圈式直线压缩机的原理性样机为研究对象,通过对此原理性样机的研究,建立其数学模型,再以此为基础在Simulink中建立此原理性样机及其基于Push-to-Push原理的控制策略的仿真模型,通过试凑法在Simulink模型中寻找使此原理性样机能够正常持续工作的点并进行仿真,从而验证基于Push-to-Push原理控制策略的可行性。 相似文献
3.
根据数显电子汽车衡的工作原理及力学传动原理。有针对性的提供实用性的理论数据。在工作原理、传感器的选用、理论计算等方面提供给读者。愿与使用者共同研究与探讨。 相似文献
4.
介绍了基于眼球角膜压平面直径自动检测原理的智能化眼压计的设计原理,包括光学原理及结构设计,二次仪表的硬件和软件设计,眼压计算方法,以及眼压计的定标结果。 相似文献
5.
针对圆锥齿轮国标规定的中点齿厚偏差在实测中难以准确计量的特点,提出了单柱测量法原理。介绍了该原理计算过程及实现该原理的通用量仪设计途径,并对原理及仪器的误差作了简明分析. 相似文献
6.
基于设计目录的原理方案及其求解过程的特征建模 总被引:22,自引:2,他引:20
研制了实现分离功能的原理方案设计目录,提出了通用的面向计算机实现的作用原理求解过程,进而对原理设计方案及其求解进程进行特征建模,开发了一个原型系统,进行了实例验证。 相似文献
7.
本文阐述了布料智能控制 模型的控制原理,并围绕此控制原理深入阐述硬件设计原理、软件编程实现及如何利用RSIogix5000开发软件包解决控制执行机构的缺陷。 相似文献
8.
原理表达是原理方案设计的首要问题 ,不仅要求能够抽象出物理原理 ,而且还需支持定常和非定常的设计任务。首先建立了机械系统的能量交互模型 ,描述了系统的能量转换关系 ;在此基础上 ,导出了原理方案设计的表达模型 ,转换原理方案设计为能量函数求解问题 ;运用键合图语言描述了机械系统包含的能量关系 ,给出其能量函数 ;最后 ,分析了该能量表达方法的特征 ,并结合具体设计实例说明其应用。 相似文献
9.
硬支承平衡机原理误差的消除及新型平衡机的构想 总被引:2,自引:0,他引:2
根据目前普遍使用的硬支承动平衡机存在的原理误差并且机械灵敏度较低的问题,对原理误差进行了简要分析,介绍了降低原理误差的各种措施,并提出了新一代动平衡机的设计构想. 相似文献
10.
11.
A. L. Vorontsov 《Russian Engineering Research》2013,33(6):332-337
The invalidity of the principle of tangential-stress pairing is demonstrated. Fundamental aspects of torque-based elasticity theory are considered. 相似文献
12.
Thermal detectors of uncooled multi-element infrared imaging arrays. I. Thermally insulated elements
The current status of the list of elements of uncooled infrared (IR) imaging arrays based on thermal insulation of their sensors and on accumulation of heat in the element volume during the time necessary for taking one frame is considered. Specific features of operation and the structure of resistive microbolometers and pyroelectric elements are described, as well as typical parameters of these elements. Prospects of improving the parameters of thermally insulated sensors of megapixel arrays are considered. It is noted that the main factor limiting further improvement of the parameters of pixels in IR imaging arrays and increasing the size of the latter is the value of the thermal resistance between the sensor and the substrate. At the modern level of technology development, the thermal resistance has actually reached the limiting value. Another physical principle of operation of IR detectors is required for a further increase in the sensitivity of sensors, a decrease in their response time, and an increase in the size of uncooled megapixel IR arrays; this principle should not include the necessity of thermal insulation of IR detectors. The operation principle based on using pyrotechnical effects will be considered in the second part of the paper. 相似文献
13.
分析了高压和低压给水加热器的结构、工作原理及旁路保护系统。给出了一种给水加热器安全阀排量的校核方法,并结合实例对安全阀进行了选型及计算。 相似文献
14.
15.
16.
A. M. Ryakhovskii 《Russian Engineering Research》2011,31(4):307-314
The wheel-rail system is regarded as a thermodynamically open frictional system conforming to the variational principle of
minimum action. That provides the basis for engineering calculations of the primary functional parameters (in particular,
the wear resistance) of locomotive wheel pairs in various operating conditions. 相似文献
17.
This author’s reply addresses the comment given in the note mentioned in the title. Theorem 3 given in Tan et al. (2009) [1] uses zero exclusion principle for the stability analysis of Fractional Order Interval Polynomial (FOIP). We show that the constant degree assumption is exist in the definition of zero exclusion principle. Although it has not been clearly stated in Tan et al. (2009) [1] that FOIP of Eq. (1) is a constant degree polynomial, this condition is implicit in the zero exclusion principle. Therefore, Theorem 3 is true under the constant degree assumption which is a requirement for zero exclusion principle. 相似文献
18.
19.