Preparation and characterization of spindle-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> mesoporous nanoparticles

Magnetic spindle-like Fe₃O₄ mesoporous nanoparticles with a length of 200 nm and diameter of 60 nm were successfully synthesized by reducing the spindle-like α-Fe₂O₃ NPs which were prepared by forced hydrolysis method. The obtained samples were characterized by transmission electron microscopy, powder X-ray diffraction, attenuated total reflection fourier transform infrared spectroscopy, field emission scanning electron microscopy, vibrating sample magnetometer, and nitrogen adsorption-desorption analysis techniques. The results show that α-Fe₂O₃ phase transformed into Fe₃O₄ phase after annealing in hydrogen atmosphere at 350°C. The as-prepared spindle-like Fe₃O₄ mesoporous NPs possess high Brunauer-Emmett-Teller (BET) surface area up to ca. 7.9 m² g^-1. In addition, the Fe₃O₄ NPs present higher saturation magnetization (85.2 emu g^-1) and excellent magnetic response behaviors, which have great potential applications in magnetic separation technology.     

Synthesis and thermal behavior of Fe<Subscript>3</Subscript>O<Subscript>2</Subscript>(BO<Subscript>4</Subscript>) oxoborate

Iron oxoborate Fe₃O₂(BO₄) has been first produced in solid-phase chemical reactions. Its thermal behavior in the temperature range 20–900°C is studied with the use in-situ high-temperature powder X-ray diffraction. It is shown that Fe₃O₂(BO₄) begins decomposing with the formation of Fe₂O₃ in the temperature range 660–900°C. Thermal expansion is sharply anisotropic at room temperature (α_max/α_min = 7) and becomes more isotropic with an increase in the temperature (α_max/α_min = 1.2). The degree of oxidation of Fe³⁺ has been confirmed by Mössbauer spectroscopy (at a room temperature), and two nonequivalent positions in the structure have been detected, which are occupied by iron atoms with the octahedral environment of the oxygen atoms.     

Soft Template Synthesis of Super Paramagnetic Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles a Novel Technique

The present study reports a facile technique for the synthesis of crystalline super paramagnetic nano ferrite (Fe₃O₄) particles using diethyl amine as a soft template. The spectral properties of Fe₃O₄ nanoparticles were characterized by UV–visible and Fourier Transform Infrared (FTIR) spectroscopies while the crystalline structure and particle size was estimated using X-Ray diffraction (XRD) as well as transmission electron microscopy (TEM) techniques. The super paramagnetic behavior of Fe₃O₄ nanoparticles was determined using vibrating sample magnetometer (VSM) at 300 K. The results of the studies revealed that this technique could be adopted to synthesize agglomerate free super paramagnetic Fe₃O₄ nanoparticles which may find potential application in the filed of biosensor and corrosion protective coatings.     

Effect of surface modification of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles on the preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/polystyrene composite particles via miniemulsion polymerization

Fe₃O₄ nanoparticles were modified by n-octadecyltrimethoxysilane (C18TMS) and 3-trimethoxysilylpropylmethacrylate (MPS). The modified Fe₃O₄ nanoparticles were used to prepare Fe₃O₄/polystyrene composite particles by miniemulsion polymerization. The effect of surface modification of Fe₃O₄ on the preparation of Fe₃O₄/polystyrene composite particles was investigated by transmission electron microscopy, Fourier transform infrared spectrophotometer (FT-IR), contact angle, and vibrating sample magnetometer (VSM). It was found that C18TMS modified Fe₃O₄ nanoparticles with high hydrophobic property lead to the negative effect on the preparation of the Fe₃O₄/polystyrene composite particles. The obtained composite particles exhibited asymmetric phase-separated structure and wide size distribution. Furthermore, un-encapsulated Fe₃O₄ were found in composite particles solution. MPS modified Fe₃O₄ nanoparticles showed poor hydrophobic properties and resulted in the obtained Fe₃O₄/polystyrene composite particles with regular morphology and narrow size distribution because the ended C=C of MPS on the surface of Fe₃O₄ nanoparticles could copolymerize with styrene which weakened the phase separation distinctly.     

Effect of HCl Concentration on the Dispersity of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles

In this paper, monodisperse 6 nm-sized Fe₃O₄ nanoparticles with spinel crystalline structure were synthesized via a co-precipitation method. The effect of HCl concentrations on Fe₃O₄ samples was investigated by TEM, VSM and UV–vis. HCl-modified Fe₃O₄ nanoparticles solution was a stable, clear, transparent cationic colloid. The results showed that HCl had a great influence on the dispersity of Fe₃O₄ nanoparticles and almost no influence on the materials magnetism.     

A study on synthesis and properties of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles by solvothermal method

Magnetic nanoparticles (Fe₃O₄) were synthesized by the solvothermal method using FeCl₃ · 6H₂O and ethylene glycol as a reactant. Powder X-ray diffraction, FT-IR, TEM, SEM, and VSM were used to characterize the magnetic particles. The reacting factors, such as reacting time, the concentration of iron source and surfactant, especially the effect of NaAc · 3H₂O, were studied. The results indicated that NaAc · 3H₂O plays the role not only as a dispersant but also a structure-directing agent. The synthesized Fe₃O₄ particles showed excellent magnetic property, which made them have potential for application in magnetic nanodevices and biomedicine.     

Synthesis of Heterogeneous Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> Nanostructured Anodes with Long-Term Cycle Stability

The 0D-1D Lithium titanate (Li₄Ti₅O₁₂) heterogeneous nanostructures were synthesized through the solvothermal reaction using lithium hydroxide monohydrate (Li(OH)·H₂O) and protonated trititanate (H₂Ti₃O₇) nanowires as the templates in an ethanol/water mixed solvent with subsequent heat treatment. A scanning electron microscope (SEM) and a high resolution transmission electron microscope (HRTEM) were used to reveal that the Li₄Ti₅O₁₂ powders had 0D-1D heterogeneous nanostructures with nanoparticles (0D) on the surface of wires (1D). The composition of the mixed solvents and the volume ratio of ethanol modulated the primary particle size of the Li₄Ti₅O₁₂ nanoparticles. The Li₄Ti₅O₁₂ heterogeneous nanostructures exhibited good capacity retention of 125 mAh/g after 500 cycles at 1C and a superior high-rate performance of 114 mAh/g at 20C.     

Synthesis of ZnGa<Subscript>2</Subscript>O<Subscript>4</Subscript> Hierarchical Nanostructure by Au Catalysts Induced Thermal Evaporation

In this paper, ZnGa₂O₄ hierarchical nanostructures with comb-like morphology are fabricated by a simple two-step chemical vapor deposition (CVD) method: first, the Ga₂O₃ nanowires were synthesized and employed as templates for the growth of ZnGa₂O₄ nanocombs; then, the as-prepared Ga₂O₃ nanowires were reacted with ZnO vapor to form ZnGa₂O₄ nanocombs. Before the reaction, the Au nanoparticles were deposited on the surfaces of Ga₂O₃ nanowires and used as catalysts to control the teeth growth of ZnGa₂O₄ nanocombs. The as-prepared ZnGa₂O₄ nanocombs were highly crystallized with cubic spinel structure. From the photoluminescence (PL) spectrum, a broad band emission in the visible light region was observed of as-prepared ZnGa₂O₄ nanocombs, which make it promising application as an optical material.     

Preparation and properties of poly(acrylic acid-co-styrene)/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposites

Poly(acrylic acid-co-styrene)/Fe₃O₄ nanocomposites were prepared using poly(acrylic acid-co-styrene) (P(AA-co-St)) and nano-Fe₃O₄ particles. The resultant materials were characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR), thermogravimetric analysis (TGA), advanced rheology expand system and superconducting quantum interference device (SQUID) magnetometer. The diameter of the magnetic particles was around 3–14 nm. The experimental results reveal that the acrylic acid segment of P(AA-co-St) can react with nano-Fe₃O₄. With increasing reaction time the storage modulus, loss modulus, complex viscosity and shear stress of the P(AA-co-St)/Fe₃O₄ ethanol suspension were increased, and the suspension changed from liquid-like behavior to gel-like behavior for the reaction between P(AA-co-St) and Fe₃O₄, as found during the rheology measurements. The thermal stability of P(AA-co-St) decreased with the addition of nano-Fe₃O₄, and the nanocomposites exhibited superparamagnetic properties above the blocking temperature.     

Effects of adding B<Subscript>2</Subscript>O<Subscript>3</Subscript> as a flux on phosphorescent properties in synthesis of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: (Eu<Superscript>2+</Superscript>, DY<Superscript>3+</Superscript> phosphor

SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was prepared by solid state reaction. B₂O₅ as a flux was added in SrAl₂O₄:(Eu ²⁺, Dy³⁺) in order to accelerate a solid state reaction. In this paper, the effects of B₂O₃ on the crystal structure and the phosphorescent properties of the material have been evaluated. The synthesized phosphor exhibited a broad band emission spectrum peaking at 520 nm, and the spectrum peak showed little effect by the B₂O₃ contents. The maximum afterglow intensity of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was obtained at the B₂O₃ content of 5%. Adding the B₂O₃ caused uniform distortion to the crystal structure of the phosphor and resulted in reducing the lengths of a and c axes and Β angle of the SrAl₂O₄ crystal. The uniform distortion was accompanied with crystal defects which can trap the holes generated by the excitation of Eu²⁺ ions. The afterglow characteristic of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was thus enhanced.     

One-pot method fabrication of superparamagnetic sulfonated polystyrene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/graphene oxide micro-nano composites

In this work, using monodispersed sulfonated polystyrene (SPS) microspheres as carriers, FeCl₃·6H₂O and FeSO₄·7H₂O as precursors, NaOH as precipitant in the presence of graphene oxide (GO), SPS/Fe₃O₄/GO micro-nano composites were fabricated by a simple one-pot method employing an inverse coprecipitation in-situ compound technology. The SPS/Fe₃O₄/GO micro-nano composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray powder diffractometer, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms and vibrating sample magnetometer. The results show that the SPS/Fe₃O₄/GO micro-nano composites were fabricated with SPS as core, GO and Fe₃O₄ nanoparticles as shell. The SPS/Fe₃O₄/GO micro-nano composites had larger BET specific surface area, average pore width and micropore volume than the pure SPS microspheres. Meanwhile, the SPS/Fe₃O₄/GO micro-nano composites had superparamagnetism and hydrophilic property. The saturation magnetization (M_s) of the SPS/Fe₃O₄/GO micro-nano composites was 10.86 emu/g, which was enough to ensure the convenient magnetic separation of solid and liquid phase.     

Research of mica/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> pearlescent pigment by co-precipitation

Experiments on preparation of mica/Fe₃O₄ pearlescent pigment were performed to discuss influences of several crucial parameters on final products. The samples were characterized by XRD, HRSEM, FTIR and color measurement, the content of Fe₃O₄ on the mica surface was also analyzed by XPS. It was found that the smoothness, compactness and colour deepness of the coating were influenced by different pH values and temperatures. The optimum preparation parameters of mica/Fe₃O₄ pearlescent pigment were obtained: the value of pH ≥ 9.2; the concentration of sodium hydroxide was 0.5 mol/l; the concentration ratio of Fe³⁺ to Fe²⁺ was 1.6 : 1; the velocity of magnetic stirring was 138 ≤ v ≤ 151 r/min; reaction temperature was 70–80°C; calcination temperature was 350°C and calcination time was 3 h.     

The Structure of Fusion-Cast High-Chrome Oxide Refractories in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> - MgO - Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System

The phase composition and structure of fusion-cast refractories composed of 57.0 – 84.2% Cr₂O₃, 4.3 – 36.1% MgO, 2.0 – 9.7% Al₂O₃, and 2.4 – 6.9% SiO₂ have been studied by petrographic and x-ray spectral microprobe analysis methods. Refractories high in MgO with modulus M = (Cr₂O₃ +Al₂O₃)/MgO = 1.64 – 3.1 are shown to consist of spinel phase Mg(Cr, Al)₂O₄ and silicate glass. Refractory materials (80.8 – 84.2% Cr₂O₃, 4.3 – 4.7% MgO, 2.0 – 9.7% Al₂O₃, and 2.7 – 6.9% SiO₂ with M = 18.7 – 20.2) are three-phase systems composed of spinel, escolaite, and glass phase. These materials, owing to their high corrosion resistance, have promising potentiality for practical applications.__________Translated from Novye Ogneupory, No. 12, pp. 69 – 74, December, 2004.     

Fabrication of Coaxial Si<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Heterostructure Nanowires by O<Subscript>2</Subscript> Flow-Induced Bifurcate Reactions

We report on bifurcate reactions on the surface of well-aligned Si_1−x Ge _x nanowires that enable fabrication of two different coaxial heterostructure nanowires. The Si_1−x Ge _x nanowires were grown in a chemical vapor transport process using SiCl₄ gas and Ge powder as a source. After the growth of nanowires, SiCl₄ flow was terminated while O₂ gas flow was introduced under vacuum. On the surface of nanowires was deposited Ge by the vapor from the Ge powder or oxidized into SiO₂ by the O₂ gas. The transition from deposition to oxidation occurred abruptly at 2 torr of O₂ pressure without any intermediate region and enables selectively fabricated Ge/Si_1−x Ge _x or SiO₂/Si_1−x Ge _x coaxial heterostructure nanowires. The rate of deposition and oxidation was dominated by interfacial reaction and diffusion of oxygen through the oxide layer, respectively.     

Preparation of stable magnetic nanofluids containing Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@PPy nanoparticles by a novel one-pot route

Stable magnetic nanofluids containing Fe₃O₄@Polypyrrole (PPy) nanoparticles (NPs) were prepared by using a facile and novel method, in which one-pot route was used. FeCl₃·6H₂O was applied as the iron source, and the oxidizing agent to produce PPy. Trisodium citrate (Na₃cit) was used as the reducing reagent to form Fe₃O₄ NPs. The as-prepared nanofluid can keep long-term stability. The Fe₃O₄@PPy NPs can still keep dispersing well after the nanofluid has been standing for 1 month and no sedimentation is found. The polymerization reaction of the pyrrole monomers took place with Fe³⁺ ions as the initiator, in which these Fe³⁺ ions remained in the solution adsorbed on the surface of the Fe₃O₄ NPs. Thus, the core-shell NPs of Fe₃O₄@PPy were obtained. The particle size of the as-prepared Fe₃O₄@PPy can be easily controlled from 7 to 30 nm by the polymerization reaction of the pyrrole monomers. The steric stabilization and weight of the NPs affect the stability of the nanofluids. The as-prepared Fe₃O₄@PPy NPs exhibit superparamagnetic behavior.     

An investigation into the conversion of In<Subscript>2</Subscript>O<Subscript>3</Subscript> into InN nanowires

Straight In₂O₃ nanowires (NWs) with diameters of 50 nm and lengths ≥2 μm have been grown on Si(001) via the wet oxidation of In at 850°C using Au as a catalyst. These exhibited clear peaks in the X-ray diffraction corresponding to the body centred cubic crystal structure of In₂O₃ while the photoluminescence (PL) spectrum at 300 K consisted of two broad peaks, centred around 400 and 550 nm. The post-growth nitridation of In₂O₃ NWs was systematically investigated by varying the nitridation temperature between 500 and 900°C, flow of NH₃ and nitridation times between 1 and 6 h. The NWs are eliminated above 600°C while long nitridation times at 500 and 600°C did not result into the efficient conversion of In₂O₃ to InN. We find that the nitridation of In₂O₃ is effective by using NH₃ and H₂ or a two-step temperature nitridation process using just NH₃ and slower ramp rates. We discuss the nitridation mechanism and its effect on the PL.     

Phase Transformations in Stabilized ZrO<Subscript>2</Subscript> - Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Compositions

Data on interactions in the ZrO₂ - Fe₂O₃ system stabilized by oxides in a high-temperature form at 1750°C are obtained. Of all zirconia-based compositions, only magnesium-zirconium cubic solid solution enters into an active reaction with Fe₂O₃ to yield MgFe₂O₄. The solid solutions formed by ZrO₂ with oxides of yttrium, neodymium, and calcium resist degradation by attack from Fe₂O₃; part of iron oxide undergoes dissolution in cubic ZrO₂. __________ Translated from Novye Ogneupory, No. 9, pp. 40 – 43, September, 2005.     

Examining the use of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles to enhance the NH<Subscript>3</Subscript> sensitivity of polypyrrole films

Summary Polypyrrole (PPy) composite films with different contents of Fe₃O₄ were prepared by in-situ polymerization of pyrrole in aqueous solutions. The dependence of dc current changes on the response of the samples exposure to NH₃ vapor has been investigated. The results shows the composite films are more stable than the pristine ones after being exposed to NH₃ vapor. Meanwhile, the response time was reduced with increasing the Fe₃O₄ content in the films. The results might be originated from the structural changes in the PPy films caused by the addition of Fe₃O₄.     

Study on the properties of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-BaO lead-free glass using in the electronic pastes

The Sb₂O₃ doping lead-free glass in Bi₂O₃-B₂O₃-BaO ternary system were prepared in the composition of several different subsystem, and the glass powder was produced through the process of water quenching. Glass transition temperatures (T _g ), glass soften temperatures(T _s ), the volume resistivity (ρ) in the temperature range of 80–200°C, and linear thermal coefficients of expansion in the temperatures range of 25–300°C (α_25–300) were measured for subsystems along with the different ratio of Bi₂O₃, B₂O₃ and BaO. For these subsystems, T _g ranged from 458 to 481°C, and T _s ranged from 490 to 512°C, both decreasing with the increasing of Bi₂O₃/B₂O₃ ratio, and increasing with the increasing of BaO/B₂O₃ ratio. The measured α_25–300 ranged from 65.3 to 76.3 × 10⁻⁷ K⁻¹, with values increasing with increasing Bi₂O₃/B₂O₃ and BaO/B₂O₃ ratio. The volume resistivity remains at a high standards, which may caused by it’s non-alkali composition, and it fluctuated from 10¹³ to 10¹¹ Ω cm with the temperature varied from 80–200°C. The structure of Bi₂O₃-B₂O₃-BaO ternary leadfree glass system was mearsured by FT-IR. The IR studies indicate that these glasses are made up of [BiO₆], [BO₃], and [BO₄] basic structural units, and it appears that Ba²⁺ acts as a glass-modifier in this ternary system, but the Bi³⁺ has entered the glass network when it is in relative high content so as to change the α_25–300, T _s and T _g .     

Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.