用Authorware 7.0制作CAI测试软件

随着计算机多媒体技术日新月异的发展和普及,计算机辅助教育CAI越来越显示其优越性,由美国Macromedia公司开发的Authorware软件为我们制作CAI课件提供了全面的支持,除了可以制作教学展示课件,还可以制作测试软件,用来测试教学效果,有较强的动态交互性。本文以制作英语课件的判断题和选择题为例,详细介绍如何利用Authorware 7.0制作CAI测试软件,并对用户的回答进行统计,评定成绩。     

应用屏幕捕捉软件丰富多媒体CAI课件制作

分析当今普遍流行的屏幕捕捉软件，结合“计算机辅助设计”课程CAI课件的制作实践，探讨了如何应用屏幕捕捉软件丰富多媒体CAI课件的制作。     

应用屏幕捕捉软件丰富多媒体CAI课件制作

分析当今普遍流行的屏幕捕捉软件,结合“计算机辅助设计”课程CAI课件的制作实践,探讨了如何应用屏幕捕捉软件丰富多媒体CAI课件的制作。     

浅谈小学数学CAI课件的制作

要制作CAI课件首先应熟悉制作流程,本文对小学数学CAI课件的制作谈一点看法。一、确定课题小学数学教学课件的制作,是为了运用计算机辅助教师解决难点、重点,而不能完全代替教师的授课。     

浅谈小学数学CAI课件的制作

要制作CAI课件首先应熟悉制作流程,本文对小学数学CAI课件的制作谈一点看法. 一.确定课题 小学数学教学课件的制作,是为了运用计算机辅助教师解决难点、重点,而不能完全代替教师的授课.教师应吃透教学理念,认真推敲思考本课有无必要使用CAI、哪些环节需要设计CAI、CAI的设计对课堂教学有多大益处、怎样设计好CAI以便处理好教学环节等问题.     

基于本体论的知识组织在智能CAI中的应用

针对传统CAI课件的教学材料和选用的表达方式过分依赖教师固有的教学思路和教学大纲，以及对教学课件的知识缺乏有效组织的缺点，本文将新引入计算机领域的，可以有效进行知识组织的本体论引入到CAI课件中，通过对CAI课件进行本体化分析，构建领域知识本体，从而得到CAI课件的本体论表示，也即对CAI课件进行有效地知识组织，从而使传统CAI课件向着智能化的方向发展。最后通过对C语言程序设计课程的实例分析，验证了基于本体论的智能CAI的有效性。     

多媒体课件制作的原则与技巧

计算机辅助教学（CAI）是现代教育技术的重要组成部分，也是目前学校教学改革的一个重要方面。本文根据作者多媒体课件制作的经验，介绍了多媒体课件制作的原则与技巧。     

浅谈中职多媒体课件制作中的有关注意事项——以《计算机应用基础》课程为例

计算机辅助教学(CAI)是一种以计算机软件为载体的教学,当今时代CAI已经成为现代教育技术的重要组成部分。新时代的教育者应该积极运用现代化的教育技术,结合当地中职生的实际情况来设计开发多媒体课件,并注意多媒体课件开发设计的每个细节,充分了解和认识各种多媒体课件的设计开发制作技术,设计开发出更好的课件。     

多媒体教学与课件的制作

随着计算机信息技术普及程度的提高，应用多媒体技术教学已成为教师改革教学方法、改进教学手段、改善教材形式和重新整合教学内容及结构的重要途径；同时，应用CAI课件教学也是教师办公自动化的一种体现。因此，学习多媒体技术的基本理论，掌握CAI课件的制作技能，已成为信息时代广大教育工作者的迫切需要。     

基于F1ash5．0的多媒体课件开发研究

随着教育事业的飞速发展．社会对计算机辅助教学软件(cay课件）的需求也与日俱增，CAI课件的开发已成为教育界研究的热门课题。在以前的多媒体CAI制作领域．多媒体课件开发主要由VB、Authorware等来完成．基于VB的多媒体课件开发对技术要求较高．在教师中普及有一定的难度．而Authorware在动画的制作上十分薄弱，往往无法满足需要。针对这种情况，我们在比较了多种多媒体创作软件之后，提出使用Flash5．0来制作多媒体课件。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.