Simultaneous voltammetric determination of phenolic antioxidants in food using a boron-doped diamond electrode

A method for the simultaneous determination of butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT) in food was developed using square-wave voltammetry (SWV). The determination of these phenolic antioxidants was carried out using a cathodically pre-treated boron-doped diamond electrode (BDD) and an aqueous-ethanolic (30% ethanol, v/v) 10 mmol L⁻¹ KNO₃ solution (pH_cond. 1.5) as supporting electrolyte. In the SWV measurements using the BDD electrode, the oxidation peak potentials of BHA and BHT present in binary mixtures were separated by about 0.3 V. The attained detection limits for the simultaneous determination of BHA and BHT (0.14 and 0.25 μmol L⁻¹, respectively) are lower than the ones by voltammetric techniques reported in the literature. The proposed method was successfully applied in the simultaneous determination of BHA and BHT in food products, with results similar to those obtained using a high-performance liquid chromatography method, at a 95% confidence level.     

Trace element levels in honeys from different regions of Turkey

A survey of 25 honey samples from different botanical origin, collected all over the Turkey was conducted to assess their trace element contents. The aim of this study was to determine the levels of cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), copper (Cu), nickel (Ni), chromium (Cr), zinc (Zn), aluminium (Al) and selenium (Se) in honey samples from different regions of Turkey. Trace element contents were determined by a flame and graphite furnace atomic absorption spectrometry technique after dry-ashing, microwave digestion and wet-digestion. The accuracy of the method was corrected by the standard reference material, NIST-SRM 1515 Apple leaves. The contents of trace elements in honey samples were in the range of 0.23–2.41 μg g⁻¹, 0.32–4.56 μg g⁻¹, 1.1–12.7 μg g⁻¹, 1.8–10.2 μg g⁻¹, 8.4–105.8 μg kg⁻¹, 2.6–29.9 μg kg⁻¹, 2.4–37.9 μg kg⁻¹, 0.9–17.9 μg kg⁻¹, 83–325 μg kg⁻¹ and 38–113 μg kg⁻¹ for Cu, Mn, Zn, Fe, Pb, Ni, Cr, Cd, Al and Se, respectively. Iron was the most abundant element while cadmium was the lowest element in the Turkish honeys surveyed. The results showed that trace element concentrations in the honeys from different regions were generally correlated with the degree of trace element contamination of the environment.     

Solid phase extraction with flame atomic absorption spectrometry for determination of traces of Ca,K, Mg and Na in quality control of white sugar

A fast and straightforward pre-concentration procedure based on solid phase extraction with a strongly acidic cation-exchanger Dowex 50 W × 8–400 was proposed to determine traces of Ca, K, Mg and Na in white sugar samples by means of flame atomic absorption spectrometry. For this purpose, 20% (m/v) white sugar solutions (100 ml) were driven through resin beds at 10 ml min⁻¹ to retain Ca, K, Mg and Na ions and to separate sucrose that passed through unretained. Thereafter, columns were rinsed with water and elements of interest were recovered prior to measurements using 5 ml of a 2 mol l⁻¹ HCl solution. Detection limits of 0.04, 0.05, 0.02 and 0.01 μg g⁻¹ for Ca, K, Mg and Na, respectively, and precision of measurements within 1–3% were achieved. The proposed method enabled to determine Ca, K, Mg and Na in samples of white sugar within corresponding ranges: 0.66–0.99 μg g⁻¹ (Ca), 2.9–12.2 μg g⁻¹ (K), 0.53–1.57 μg g⁻¹ (Mg) and 0.06–0.30 μg g⁻¹ (Na). Accuracy of this sample pre-treatment procedure and analysis method was assessed by performing spikes and recovery experiments. Recoveries of added Ca, K, Mg and Na were found to be within 97–102%, demonstrating good reliability of results.     

Effect of foliar application of selenium on its uptake and speciation in carrot

Carrot (Daucus carota) shoots were enriched by selenium using foliar application. Solutions of sodium selenite or sodium selenate at 10 and 100 μg Se ml⁻¹, were sprayed on the carrot leaves and the selenium content and uptake rate of selenium were estimated by ICP–MS analysis. Anion and cation exchange HPLC were tailored to and applied for the separation of selenium species in proteolytic extracts of the biological tissues using detection by ICP–MS or ESI–MS/MS. Foliar application of solutions of selenite or selenate at 100 μg Se ml⁻¹ resulted in a selenium concentration of up to 2 μg Se g⁻¹ (dry mass) in the carrot root whereas the selenium concentration in the controls was below the limit of detection at 0.045 μg Se g⁻¹ (dry mass). Selenate-enriched carrot leaves accumulated as much as 80 μg Se g⁻¹ (dry mass), while the selenite-enriched leaves contained approximately 50 μg Se g⁻¹ (dry mass). The speciation analyses showed that inorganic selenium was present in both roots and leaves. The predominant metabolised organic forms of selenium in the roots were selenomethionine and γ-glutamyl-selenomethyl-selenocysteine, regardless of which of the inorganic species were used for foliar application. Only selenomethionine was detected in the carrot leaves. The identity of selenomethionine contained in carrot roots and leaves was successfully confirmed by HPLC–ESI–MS/MS.     

Comparison of isoflavones composition in seed,embryo, cotyledon and seed coat of cooked-with-rice and vegetable soybean (Glycine max L.) varieties

In order to study the content and composition of isoflavones retained in soybean seed component, obtained each component part the embryo, cotyledon and seed coat tissues of nine different soybean varieties were analyzed for 12 isoflavones using high performance liquid chromatography with photo diode array detector (HPLC-PDA) and were compared to each other. A total average concentration of isoflavone was 2887 μg g⁻¹ in embryo, 575 μg g⁻¹ in whole seed, 325 μg g⁻¹ in cotyledon, and 33 μg g⁻¹ in seed coat. With respect to each tissue of soybean varieties, isoflavone content was highest in Geomjeongkong 2 embryo (5701 μg g⁻¹), Geomjeongolkong whole seed (1321 μg g⁻¹), Heugcheongkong cotyledon (951 μg g⁻¹), and Keunolkong seed coat (56 μg g⁻¹). Isoflavone was least present in Keunolkong embryo (341 μg g⁻¹), Hwaeomputkong whole seed (175 μg g⁻¹), Seonheukkong cotyledon (81 μg g⁻¹), and Seoklyangputkong seed coat (5 μg g⁻¹). Overall, embryo and seed coat of all nine varieties contained isoflavones at the highest and lowest level, respectively. Isoflavones accumulated in the order of malonylglycoside, glycoside, acetylglycoside, and aglycon, among which malonylglycoside was the most abundant form ranging from 66% to 79% of the total isoflavone content in all three tissues. The embryo of cooked-with-rice soybean with black seed coat appears to be the best source of isoflavone.     

Selective determination of copper and iron in various food samples by the solid phase extraction

The solid phase extraction method developed using N-benzoyl-N-phenylhydroxylamine as a chelating reagent and Amberlite XAD-1180 as an adsorbent was used for the determination of Cu(II) and Fe(III) in various food samples by flame atomic absorption spectrometry. The samples were digested by using nitric acid and hydrogen peroxide. The Cu concentrations ranged from 1.01 to 5.81 μg g⁻¹ in cereals, from 0.40 to 9.67 μg g⁻¹ in vegetable and fruits and from 0.37 to 0.70 μg g⁻¹ in infusions while the Fe concentrations ranged from 7.48 to 34.3 μg g⁻¹ in cereals, from 5.74 to 260 μg g⁻¹ in vegetable and fruits, from 1.63 to 5.12 μg g⁻¹ in infusions and from 0.24 to 1.56 mg L⁻¹ in beverage samples. The Cu and Fe concentrations found were compared with the results obtained from the other food studies in the world.     

Analysis of potential adulteration in herbal medicines and dietary supplements for the weight control by capillary electrophoresis

Four different phytopharmaceutical dosage forms for use in weight control programs were analyzed. Two different ground herbal blends and their correspondent infusions, a capsule and a tincture were investigated for the presence of compounds used as adulterants in these products. A capillary electrophoresis (CE) method was developed and validated. The optimized experimental conditions were: BGE, sodium tetraborate buffer 20 mM, pH 9.2, voltage applied 30 kV, capillary temperature 25 °C, injection sample at 0.5 Psi during 5 s. Ephedrine, norephedrine, caffeine and furosemide were baseline separated in less than 7 min; the migration times were found to be 2.65, 2.90, 3.75 and 6.58 min, respectively. The analysis showed in sample 3 concentrations of 0.45 ± 0.03 mg g⁻¹ (ephedrine), 0.33 ± 0.02 mg g⁻¹ (norephedrine), 1.09 ± 0.41 mg g⁻¹ (caffeine) and 0.80 ± 0.17 mg g⁻¹ (furosemide). Caffeine content in samples 1, 2 and 4 was 0.61 ± 0.06 mg g⁻¹, 15.66 ± 1.05 mg g⁻¹ and 2.27 ± 0.13 mg ml⁻¹, respectively. Linearity was obtained in the concentration range of 1–1000 μg ml⁻¹. Limits of detection (LOD) and quantification (LOQ) were determined as 0.42 μg ml⁻¹ and 1.40 μg ml⁻¹ (ephedrine), 0.47 μg ml⁻¹ and 1.40 μg ml⁻¹ (norephedrine), 0.12 μg ml⁻¹ and 0.48 μg ml⁻¹ (caffeine), 0.22 μg ml⁻¹ and 0.73 μg ml⁻¹ (furosemide).     

A validated matrix solid-phase dispersion method for the extraction of organophosphorus pesticides from bovine samples

A method based on matrix solid-phase dispersion (MSPD) was developed for the quantitative extraction of five organophosphorus (OPPs) pesticides from bovine samples. The determination was carried out by high performance liquid chromatography (HPLC) with diode array spectrophotometric UV detection. The MSPD extraction with octadecylsilyl (C18) sorbent combined with a silica gel clean-up and acetonitrile elution was optimised for chlorpyrifos, chlorfenvinphos, diazinon, fenitrothion, and parathion-methyl. The method was validated, yielding recovery values higher than 94%, except for chlorfenvinphos in liver (55%), and precision values, expressed as relative standard deviations (RSDs), which were less than or equal to 15% in liver and 11.5% in muscle at spiking levels of 0.25, 2.5 and 5 μg g⁻¹. Linearity was studied from 0.5 to 15 μg g⁻¹, and the limits of detection (LODs) were found to be lower than 0.1 μg g⁻¹_. This method was applied to the analysis of real samples with confirmative analyses performed using gas chromatography–mass spectrometry (GC–MS) in selected ion monitoring mode (SIM).     

Quantitative determination of the phenolic antioxidants using voltammetric techniques

Synthetic antioxidants, such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), show sensitivity to voltammetric waves. The waves of these antioxidants, however, are seriously overlapped and it is difficult to determine them simultaneously. The influence of different parameters (working electrode, supporting electrolyte, pH, voltammetric technique) was evaluated in a quantitative simultaneous determination of three antioxidants in alcoholic mixtures and real sample foods. Glassy carbon (GC) and platinum (Pt) working electrodes were investigated as mediators of oxireduction reactions. Two supporting electrolytes were investigated: Britton-Robinson 0.1 mol l⁻¹ buffer (pH 2.0) and HCl 0.1 mol l⁻¹ (pH 2.0) both with 2 g l⁻¹ (p/v) of methanol. In this paper, voltammetric conditions for the analysis of up to three-component mixtures of antioxidant present at levels: 2.0-100.0 mg l⁻¹ for BHA, 4.0-100.0 mg l⁻¹ for TBHQ and 2.0-20.0 mg l⁻¹ for BHT at GC in HCl 0.1 mol l⁻¹ and 8.0-120.0, 10.0-130.0 and 4.0-30.0 mg l⁻¹ for BHA, TBHQ and BHT, respectively, at Pt in the same supporting electrolyte. The results show that for real food samples, the parameters investigated were satisfactory for quantitative determination using square wave voltammetry (SWV) without chemometric approaches and without suffering overlapping problems.     

Simultaneous multi-channel hydride generation atomic fluorescence spectrometry determination of arsenic,bismuth, tellurium and selenium in tea leaves

A novel, rapid and sensitive method for the simultaneous multi-channel hydride generation atomic fluorescence spectrometry (HG-AFS) determination of total arsenic (As), total bismuth (Bi), total tellurium (Te) and total selenium (Se) in tea leaves was proposed. The operating parameters of self-made multi-channel HG-AFS were optimised, including negative high voltage of photo multiplier tube (PMT), the flow rates of carrier and shield gas, observation height and lamp currents. The conditions of hydride generation for As, Bi, Te and Se were studied in details. Under optimal conditions, the method detection limits (MDL) for As, Bi, Te and Se in tea leaves were 0.0152 μg g⁻¹, 0.0080 μg g⁻¹, 0.0022 μg g⁻¹ and 0.0068 μg g⁻¹, respectively. The proposed method was successfully applied to the simultaneous determination of As, Bi, Te and Se in various tea leaves and the spike recoveries were in the range of 90–103%. The accuracy of method was validated by analysing a tea certified reference material. The obtained values were consistent with the certified ones.     

Determination of lead and cadmium in food samples by the coprecipitation method

In this study, the coprecipitation method developed using a combination of 2-mercaptobenzothiazole (MBT) as a chelating reagent and copper as coprecipitate carrier was used for the determination of trace lead and cadmium in various food samples by graphite furnace atomic absorption spectrometry (GFAAS). The method was applied for the determination of Pb(II) and Cd(II) in salami, sausage, chicken, anchovy, spinach, cabbage, onion, dill, parsley, lettuce, tea and rice samples. The matrix modifiers were added as 50 μg NH₄H₂PO₄ + 3 μg Mg(NO₃)₂ for both Pb(II) and Cd(II). The signals were measured as peak area. The concentrations of Pb(II) and Cd(II) in the food samples were found to be in the range of 6.63 ng g⁻¹ (anchovy) −3.30 μg g⁻¹ (spinach) and 2.67 ng g⁻¹ (salami) −0.51 μg g⁻¹ (lettuce), respectively.     

Determination of trace elements in Croatian floral honey originating from different regions

The concentrations of As, Cd, Cu, Hg and Pb were determined in 54 multi-floral honey samples collected from five regions of Croatia during 2009 and 2010. Element contents decreased in the following order: Cu > Pb > As > Hg > Cd. Significant differences in lead and copper levels were observed between regions. Mean levels of elements (μg kg⁻¹) in all honey samples measured were: 19.7 for As, 1.51 for Cd, 1074 for Cu, 2.72 for Hg and 65.2 for Pb. Copper and lead were the most abundant elements in the Centre region, with range and mean contents of 108–41,271 and 3232 μg kg⁻¹ and 22.0–440 and 131 μg kg⁻¹, respectively. The highest element contents were: As 23.8 μg kg⁻¹ in the South region, Cd 2.11 μg kg⁻¹ in the Southwest region and Hg 2.63 μg kg⁻¹ in the Northeast region. The finding that lead contents in Croatian honey were higher than most reported lead levels in honey from other European countries is of particular concern. These indicate that attention must be focused on setting positions for honey production hives in areas distant from highways and railways.     

Determination of pyrethroids in porcine tissues by matrix solid-phase dispersion extraction and high-performance liquid chromatography

An effective matrix solid-phase dispersion (MSPD) extraction for determination of two pyrethroids (cypermethrin and deltamethrin) in porcine tissues (liver, muscle, heart and kidney) is described. A neutral alumina-based MPSD column was used for extraction of analytes. The high-performance liquid chromatography and ultraviolet detector was applied using a reverse-phase C₁₈ column and acetonitrile-water (85:15, v/v) was used as mobile phase. The good linear fit curve ranging from 0.05 to 50 μg mL⁻¹ for cypermethrin (CM) and deltamethrin (DM) was obtained with a regression coefficient (r) of 0.999. Recoveries at 0.2 and 0.5 μg g⁻¹ levels were between 83.5% and 109%. The limits of detection and quantification were: 0.01 and 0.026 μg g⁻¹ for CM, 0.017 and 0.056 μg g⁻¹ for DM, respectively. The proposed method was successfully applied to the determination of the pyrethroids in porcine tissues.     

Effect of modifiers for As,Cu and Pb determinations in sugar-cane spirits by GF AAS

Palladium plus magnesium nitrates with and without Ir, Ru and W were evaluated for the simultaneous determination of As, Cu and Pb in cachaça by graphite furnace atomic absorption spectrometry. For 20 μL of sample, 5 μL Pd(NO₃)₂ and 3 μL Mg(NO₃)₂ dispensed together onto the Ir-coated platform of the THGA, analytical curves in the 0–30.0 μg L⁻¹ As, 0–1.50 mg L⁻¹ Cu and 0–60.0 μg L⁻¹ Pb were built up and typical linear correlation coefficients were always better than 0.999. The limit of detection was 1.30 μg L⁻¹ As, 140 μg L⁻¹ Cu and 0.90 μg L⁻¹ Pb. As, Cu and Pb contents in 10 cachaça samples agreed with those obtained by ICP-MS. Recoveries of spiked samples varied from 96% to 106% (As), 97% to 112% (Cu) and 92% to 108% (Pb). The relative standard deviation (n = 12) was typically 2.7%, 3.3% and 1.9%.     

Occurrence of patulin and its dietary intake through apple juice consumption by the Spanish population

A survey was conducted to determine levels and dietary intake of Patulin (PAT) from apple juices consumed in Spain. One hundred samples of apple juice were bought from distinct supermarkets. PAT was extracted by a liquid–liquid extraction technique and analysed with a micellar electrokinetic chromatography (MEKC) method. 66% of the samples contained PAT over the limit of detection of the method (0.7 μg L⁻¹). The PAT apple juice mean and median levels obtained were 19.4 and 4.8 μg L⁻¹, respectively, in a range between 0.7 and 118.7 μg L⁻¹. In 11% of the samples, PAT contamination exceeded the maximum permitted level of 50 μg L⁻¹ established by the EU regulation. In Spain, no significant variations were observed with respect to data published 15 years ago.     

Determination of methylmercury in marine and freshwater fish in Ghana using a combined technique of dithizone extraction and gas–liquid chromatography with electron capture detection

Concentrations of methylmercury (MeHg) residues were determined in different marine and freshwater fishes from Ghana. Samples were treated with ethanolic potassium hydroxide in water bath at 100 °C for 1 h. After neutralising with HCl and washing with hexane, MeHg was extracted with dithizone in toluene, cleaned up and determined by gas chromatography with electron capture detection (GC–ECD). The method was sensitive with good precision, detection limit of 0.0005 μg g⁻¹ (0.5 μg kg⁻¹) and provided good separation for organomercury compounds. The validity of the method was established using dogfish muscle certified reference material, DORM-2. The method was applied to different fish species. Concentration of MeHg in the edible muscle tissue of the tested fish ranged from 0.009 to 0.107 μg g⁻¹ wet weight. The concentrations of MeHg in the fish samples obtained do not however, constitute any significant mercury exposure to the general population through consumption of the tested fish species.     

Dispersive liquid–liquid microextraction for the determination of organochlorine pesticides residues in honey by gas chromatography-electron capture and ion trap mass spectrometric detection

A simple dispersive liquid–liquid microextraction (DLLME) protocol for the determination of 15 organochlorine pesticides residues in honey is proposed. The selected pesticides were separated using gas chromatography and detected by electron capture (ECD) or ion trap mass spectrometry (GC-IT/MS). Several parameters affecting the extraction efficiency namely type and volume of organic extraction solvent, type and volume of disperser solvent, sample pH, ionic strength, extraction time and centrifugation speed were systematically investigated. The final DLLME protocol involved the addition of 750 μL acetonitrile (disperser) and 50 μL chloroform (extraction solvent) into a 5 mL aqueous honey solution followed by centrifugation. The sedimented organic phase (chloroform) were analysed directly by GC-IT/MS or evaporated and reconstituted in acetonitrile prior to the GC-ECD analysis. The analytical performance of the GC-ECD and GC-IT/MS methods was compared and discussed. Under the selected experimental conditions, the enrichment factors varied between of 36 and 114. The limits of detection (LOD) were in the range of 0.02–0.15 μg L⁻¹ (0.4–3 ng g⁻¹) for GC-ECD and 0.01–0.2 μg L⁻¹ (0.2–4 ng g⁻¹) for GC-IT/MS which is adequate to verify compliance of products to legal tolerances. The proposed method was applied to the analysis of the selected organochlorine pesticides residues in various honey samples obtained from Greek region. Mean recoveries were ranged from 75% to 119% while the precision was better than 20% in both methodologies.     

Development of polyclonal antibody-based indirect competitive enzyme-linked immunosorbent assay for sodium saccharin residue in food samples

A sensitive and specific polyclonal antibody (PcAb)-based indirect competitive enzyme-linked immunosorbent assay (icELISA) for sodium saccharin is described. 6-Amino saccharin was coupled to carrier protein for artificial antigen by diazotisation. New Zealand white rabbits were immunised to obtain anti-sodium saccharin PcAb and then icELISA was developed. The assay showed high sensitivity and specificity to sodium saccharin, with the 50% inhibition value (IC₅₀) of 0.243 μg mL⁻¹, workable range (IC₃₀–IC₇₀) of 0.050–12.8 μg mL⁻¹ and limit of detection (LOD, IC₂₀) of 0.021 μg mL⁻¹. The average recoveries of sodium saccharin in spiked food samples were estimated ranging from 70.7% to 98.8%. A statistically significant correlation of results was obtained between this new ELISA and previously established HPLC approaches with the food-relevant sodium saccharin concentration range 0–320 μg mL⁻¹ (R² = 0.9887–0.9975). These results indicated that the established ELISA was a potential and useful analytical tool for rapid determination of sodium saccharin residue in food samples.     

Effect of phosphorus on the fruit yield and food value of two landraces of Trichosanthes cucumerina L.- Cucurbitaceae

Studies were conducted in the early season of 2002 and 2003 at the Teaching and Research Farm, Obafemi Awolowo University, Ile-Ife, Nigeria to evaluate the effect of phosphorus (P) on fruit yield and chemical composition of two landraces of Trichosanthes cucumerina L. For the purpose of the study, two landraces of T. cucumerina named Landrace I and Landrace II were used. The five levels of phosphorus evaluated were 0, 30, 60, 90 and 120 kg P₂O₅ ha⁻¹ using single super phosphate fertilizer (8% P). Statistical analysis showed that 90 kg P₂O₅ ha⁻¹ gave statistically significant higher fruit yield (16.4 tons ha⁻¹) compared to other P levels. The fruit yield of the two Landraces did not differ significantly. Except for crude protein content, the 90 kg P₂O₅ ha⁻¹ produced significantly higher ether extract (1.22 g 100 g⁻¹), crude fibre (1.93 g 100 g⁻¹), moisture content (90.5 g 100 g⁻¹), ash (0.90 g 100 g⁻¹), total sugars (0.81 g 100 g⁻¹) and ascorbic acid (28.7 mg 100 g⁻¹) than other P levels. The essential amino acids compositions were also significantly higher at 90 g 100 g⁻¹ compared to other lower P levels. Landrace I had significantly higher ether extract (0.90 g 100 g⁻¹) content than Landrace II (0.62 g 100 g⁻¹) while Landrace II in turn had significantly higher total sugar (0.76 g 100 g⁻¹) compared to Landrace I (0.61 g 100 g⁻¹). The essential amino acids composition is high and the oxalate composition is low. The high ascorbic acid and amino acid content together with a low oxalate composition suggested a strong basis for encouraging the cultivation of this indigenous fruit vegetable to augment nutrient requirement, improve diet and consequently alleviate poverty, preserve the biodiversity and increase the gene bank of neglected wild species of high quality nutrient sources.     

Comparison of the cell wall composition for flesh and skin from five different plums

Cell walls were isolated from flesh and skin of five plum varieties corresponding to three species (Prunus domestica L., Prunus salicina Lindl. and Prunus insititia Lindl.) using the alcohol-insoluble solids (AIS) procedure. Yields varied from 83 to 114 g kg⁻¹ dry weight in the flesh and from 192 to 361 g kg⁻¹ dry weight in the skins. Their main sugars were uronic acid (224–322 mg g⁻¹ AIS), cellulosic glucose (139–170 mg g⁻¹ AIS), galactose and arabinose. Galactose and arabinose ratio were variable between the varieties. The degrees of methylation were high (62–84).