共查询到20条相似文献,搜索用时 74 毫秒
1.
2.
DGPS导航定位系统的设计实现 总被引:3,自引:0,他引:3
DGPS导航定位系统由GPS卫星星座、基站及移动单元的GPS接收机、通信链路以及运行于导航计算机的监控程序组成.基站和天线设置对通信数据链路、网络负载能力有很大影响,并采取相应的干扰抑制措施. 相似文献
3.
为改善卫星双向时间比对(TWSTFT)中的周日效应并探究其成因,利用当前ABS-2A卫星的亚欧国际双向时间比对网的冗余性,选取不同时段不同基线长度的卫星双向时间比对链路进行分析。首先将硬件SATRE TWSTFT结果与软件接收机SDR TWSTFT进行比较,然后将SATRE TWSTFT和以亚欧不同实验室为中继站得到的间接TWSTFT结果进行对比分析,最后以完全独立于TWSTFT的GPS精密单点定位(PPP)时间比对为参考,对上述计算结果进行性能评估。结果表明,SDR TWSTFT对亚欧以及亚洲SATRE TWSTFT时间偏差指标(TDEV)平均增益因子为1.75左右。以德国物理技术研究院为中继站的中国科学院国家授时中心和中国计量科学研究院之间的间接链路对直接链路的时间偏差平均增益因子为1.22。 相似文献
4.
5.
将路径损耗应用到可变步长的功率控制算法中,使得闭环功率控制的控制精度和收敛速度有了更大的提高,并加入依据下行信道的质量估计上行信道的损耗和噪声干扰量的机制,从而对MS的发射功率进行迅速调整,然后利用闭环功率控制进一步调节,最后仿真对比3种算法的控制精度和收敛性速度。仿真结果表明改进后的变步长功率控制算法具有更好的功率控制精度和收敛速度。 相似文献
6.
7.
组态王DDE通信 总被引:2,自引:0,他引:2
张国 《试验技术与试验机》2005,45(3):28-30
本文通过介绍组态王与VC程序做DDE通信的开发过程,详细介绍了组态王DDE通信的开发细节,讨论了组态王建立DDE通信链路的具体过程。 相似文献
8.
9.
10.
本文介绍了XK3190-C602仪表的主要功能之-ModbusRTU协议,介绍了C602仪表如何与上位机软件通讯以及如何正确地设置参数使系统达到最佳的性能。 相似文献
11.
12.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
13.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
14.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
15.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献
16.
The article presents a brief review of the wear models based on the kinetic thermofluctuation approach. The materials were developed using SamGTU sclerometric programming software and a set of instruments developed at Samara Engineering University for assessing the parameters of kinetic thermoactivation for surface fracture deformed by friction. The first obtained results of assessments and the estimated prediction of wear resistance exemplified by tribocouple of the aircraft chassis are presented. 相似文献
17.
18.
详细分析了圆柱面素线的直线度公差带在新旧标准中定义和解释的区别,并从对圆柱面素线实际要素检测的角度,提出了推行新标准的实际意义。 相似文献
19.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献