共查询到19条相似文献,搜索用时 71 毫秒
1.
2.
本文指出焊接工艺评定是压力容器制造焊接质量控制的重要控制环节,焊接工艺评定应以可靠的焊接性为依据,比较了焊接工艺评定试验与焊接性试验的目的、方法、作用的区别,也指出了焊接工艺评定试验与焊接性试验的联系。 相似文献
3.
张西雷 《中国石油和化工标准与质量》2013,(11):244-245
输油管道焊接工艺评定是为验证所拟定的焊件焊接工艺的正确性而进行的试验过程及结果评价。通常把影响输油管道焊接工艺的因素分为重要因素、补加因素和次要因素。当变更焊接工艺中的任何一个重要因素时,都要重新进行焊接工艺评定。每个工艺评定标准都对焊接工艺评定的重要因素进行了规定,在实际使用时要根据设计要求的标准要求进行焊接工艺评定。 相似文献
4.
依据焊接工艺评定报告及现场施工实际,对Q345R+S11306复合板焊接工作进行了分析,确定了最佳的施工工艺。 相似文献
5.
6.
7.
8.
通过焊接工艺方案的选定和焊接工艺评定试验,确定了最佳工艺参数和相适应的焊工操作手法,并进一步在实际中得到应用,焊出了合格的产品。 相似文献
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
A process we term “natural fiber welding” is demonstrated by which loose fibers are transformed to create a congealed network using an IL solvent. Several examples are discussed that include cellulosic and protein‐based materials. SEM shows the fusion of fibers upon treatment. XRD and FT‐IR spectroscopy of cellulosic materials show that significant amounts of the native polymer structure are retained after the process is completed. Data suggest that material at the fiber exterior is preferentially transformed while material in the fiber core is left in the native state. Data also demonstrate that the amount of material modified can be tailored by control of variables such as the IL solvent concentration, the process temperature, and the processing time.
19.
本文分析了钨极氩弧焊常见故障的现象、原因及预防措施。采用自动脉冲交流钨极氩弧焊接方法对L2纯铝进行了焊接工艺试验,对L2纯铝焊接工艺性进行了研究,得出以下结论:对于3mm厚的L2纯铝板,焊接电流的基值电流90A、脉冲电流170A、焊接速度为178mm/min、送丝速度0.9m/min及脉,中频率为2Hz是较合理的工艺参数。通过测试焊缝的力学性能,接头的抗拉强度的最大值为86.0942MPa,与母材的抗拉强度较接近。从对焊缝组织的观察和分析知,焊缝中的气孔和夹杂物较少。该参数下热影响区的晶粒尺寸也较其它参数下的细小且均匀。 相似文献