Synthesis,characterization, and photophysical properties of novel poly(p‐phenylene vinylene) derivatives with conjugated thiophene as side chains

Two novel poly(p‐phenylene vinylene) (PPV) derivatives with conjugated thiophene side chains, P1 and P2, were synthesized by Wittig‐Horner reaction. The resulting polymers were characterized by ¹H‐NMR, FTIR, GPC, DSC, TGA, UV–Vis absorption spectroscopy and cyclic voltammetry (CV). The polymers exhibited good thermal stability and film‐forming ability. The absorption spectra of P1 and P2 showed broader absorption band from 300 to 580 nm compared with poly[(p‐phenylene vinylene)‐alt‐(2‐methoxy‐5‐octyloxy‐p‐phenylene vinylene)] (P3) without conjugated thiophene side chains. Cyclic voltammograms displayed that the bandgap was reduced effectively by attaching conjugated thiophene side chains. This kind of polymer appears to be interesting candidates for solar‐cell applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Novel porphyrin‐grafted poly(phenylene vinylene) derivatives: Synthesis and photovoltaic properties

A series of novel porphyrin‐grafted poly (phenylene vinylene) derivatives, Porp‐RO‐PPV, were synthesized by a simple two‐step method. These copolymers contain conjugated poly(phenylene vinylene) derivatives as polymer backbone and covalently linked porphyrin units as side chain, which were confirmed by FTIR and ¹H NMR, and used for photovoltaic devices. The thermal, optical properties and sensitizing effect, and photovoltaic properties have been investigated. The emission spectra of Porp‐RO‐PPV copolymers revealed the existence of strong energy transfer from PPV backbone to porphyrin units. The energy conversion efficiency (η_e) of photovoltaic devices based on Porp‐RO‐PPV+PCBM reached 0.33% (78.2 mW/cm², AM1.5) and porphyrin units in the copolymers showed good sensitizing effect at low concentration. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Micropatterning of poly(p‐phenylene vinylene) by femtosecond laser induced forward transfer

Conjugated polymers are important materials for optical applications, among which poly(p‐phenylene vinylene) (PPV) has a major role due to its applicability in sensors, organic light‐emitting diodes and large area displays. Despite advances on the synthesis of PPV‐based polymers and the improvements of their properties, its printing process, in particular involving the solid phase, remains unsuitable for the development of electro‐optical microcircuits. This paper demonstrates the printing of PPV from the solid phase in 2D micropatterns. Such an achievement was performed using laser induced forward transfer with femtosecond pulses, which allows area‐selective deposition within reduced scales as thin as ca 100 nm and 5 µm wide. Raman, fluorescence and electrochemical impedance spectroscopies confirm that the printed PPV micropatterns have the same structure, emission spectrum and conductivity as the target material, revealing the conservation of their original properties even after laser irradiation. The printing process was carried out using PPV films, overcoming the insolubility issue of this material. The optical and electrical characterization of the transferred PPV demonstrates the potential of this method for the patterning of electro‐optical microdevices, since luminescence and electrical conductivity were preserved. © 2018 Society of Chemical Industry     

Polymeric coatings for photostability enhancement of poly(p‐phenylene vinylene) derivative films

Poly(p‐phenylene vinylene) (PPV) derivatives are an important class of conjugated polymers, known for their applications as electroluminescent materials for light‐emitting devices and sensors. These derivatives are highly susceptible to photodegradation by the combined action of oxygen and light. Here, the use of various commercial polymers as protective coatings against the photodegradation of PPV derivatives was explored. Cast films of two similar PPV derivatives, poly[(2‐methoxy‐5‐n‐hexyloxy)‐p‐phenylene vinylene] and poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐p‐phenylene vinylene], were submitted to photodegradation by exposure to white light under atmospheric conditions in order to verify if the type of side chain (linear or branched) had an effect on the photodegradation. No significant differences in the photodegradation behaviour between the two polymers were noticed. The following commercial polymers were tested as protective coatings for the PPV derivative cast films: 99 and 80% hydrolysed poly(vinyl alcohol) (PVA) and starch. The best results were achieved using coatings of 99% hydrolysed PVA, which increased about 700 times the time necessary for complete degradation of the PPV derivative films. The results show the effectiveness of this coating in minimizing and, possibly, controlling the effects of the photodegradation of PPV derivative films, which can be useful in many applications, e.g. oxygen sensors. Copyright © 2009 Society of Chemical Industry     

Short poly(phenylene vinylene) chains grafted poly(organophosphazene)

Brominated poly(bis(4-methylphenoxyphosphazene) was allowed to react with 1,4-bischloromethylbenzene or 1,4-bischloromethyl-2,5-dimethoxybenzene in solution using phase transfer catalyst or potassium t-butoxide. Poly(p-phenylene vinylene) or poly(2,5-methoxy-1,4-phenylene vinylene) grafted organophosphazene copolymers were obtained. The UV-Vis absorption, photoluminescent, and thermal properties of the copolymers were measured. The copolymers are complete soluble in common organic solvents and fluoresce in the blue color range. The copolymers were used to build a series of organic light emitting diode (OLED). Only weak to nominated intensities with emission color from blue to red were obtained. The photoluminescent and electroluminescent (EL) spectra indicated there is a distribution in the PPV conjugated length. The compositions of the copolymers before and after the graft reaction were analyzed using NMR.     

Molecular weight determination of poly(phenylene sulfide ether)

Poly(phenylene sulfide ether) and poly(phenylene sulfoxide ether sulfide ether) (PPSOESE) were successfully prepared and their structures were proved by several analytical techniques in the present work. The molecular weight (MW) of PPSOESE, a soluble polymer in common organic solvent at room temperature, was determined by gel permeation chromatography. Based on the conversion reaction of the two polymers, the MW of PPSE was calculated and correlated with its intrinsic viscosity. As a result, the Mark‐Houwink equation for PPSE was concluded. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Electroluminescence and photovoltaic properties of poly(p‐phenylene vinylene) derivatives with dendritic pendants

A copolymer of dendronized poly(p‐phenylene vinylene) (PPV), poly{2‐[3′,5′‐bis (2′‐ethylhexyloxy) bnenzyloxy]‐1,4‐phenylene vinylene}‐co‐poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene] (BE‐co‐MEH–PPV), was synthesized with the Gilch route to improve the electroluminescence and photovoltaic properties of the dendronized PPV homopolymer. The polymer was characterized by ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, and electrochemical cyclic voltammetry and compared with the homopolymers poly{2‐[3′, 5′‐bis(2‐ethylhexyloxy) benzyloxy‐1,4‐phenylene vinylene} (BE–PPV) and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH–PPV). Polymer light‐emitting diodes based on the polymers with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/polymer/Ca/Al were fabricated. The electroluminescence efficiency of BE‐co‐MEH–PPV reached 1.64 cd/A, which was much higher than that of BE–PPV (0.68 cd/A) and a little higher than that of MEH–PPV (1.59 cd/A). Photovoltaic properties of the polymer were studied with the device configuration of ITO/PEDOT : PSS/polymer : [6,6J‐phenyl‐C₆₁‐butyric acid methyl ester] (PCBM)/Mg/Al. The power conversion efficiency of the device based on the blend of BE‐co‐MEH–PPV and PCBM with a weight ratio of 1 : 3 reached 1.41% under the illumination of air mass 1.5 (AM1.5) (80 mW/cm²), and this was an improvement in comparison with 0.24% for BE–PPV and 1.32% for MEH–PPV under the same experimental conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Crosslinkable poly(phenylene oxide) containing pendent 1,2-diphenylcyclopropane groups

Crosslinkable poly(phenylene oxide)s containing pendent 1,2-diphenylcyclopropane groups have been synthesized by oxidative polymerization from four new phenols containing the 1,2-diphenylcyclopropane group. The monomers were prepared by base-catalysed decomposition of the corresponding hydroxy-substituted 3,5-diphenyl-2-pyrazolines, which were the products of the reaction between hydroxy-substituted chalcones and hydrazine monohydrate. Characterization of and crosslinking studies on these polymers were carried out utilizing differential scanning calorimetry, thermogravimetric analysis, gel permeation chromatography and nuclear magnetic resonance. The polymers can be thermally cross-linked when heated to 350°C and the glass transition temperatures (T_g) of the polymers increase after crosslinking. The resulting crosslinked networks are insoluble in all solvents examined. Thermogravimetric analysis shows that no significant weight loss accompanies the crosslinking reaction.     

超支化聚苯硫醚与线性聚苯硫醚的对比表征

以2,4-二氯苯硫酚为原料,采用一步法合成超支化聚苯硫醚。笔者运用红外光谱、拉曼光谱、荧光光谱、示差扫描量热分析、热重分析、广角X-射线衍射、溶解实验等分析手段,对超支化聚苯硫醚和线性聚苯硫醚的基本性能进行了对比。由于两者结构上的差异,使得两者表现出不同的特性。超支化聚苯硫醚具有三取代苯结构,具有很强的荧光效应、完全的不结晶、溶于有机溶剂、热降解温度低于线性聚苯硫醚约60℃等特性。广角X-射线衍射谱图也和结晶、无定型线性聚苯硫醚有很大不同。     

Novel hyperbranched poly(phenylene oxide)s with phenolic terminal groups: synthesis, characterization, and modification

Novel hyperbranched poly(phenylene oxide)s (HPPOs) with phenolic terminal groups were prepared from 4-bromo-4′,4″-dihydroxytriphenylmethane via a modified Ullmann reaction. This monomer was treated with potassium carbonate or sodium hydroxide as a base and copper chloride as a catalyst in an aprotogenic solvent, either dimethylsulphoxide (DMSO) or sulfolane. The sulfolane/NaOH system at higher temperature led to more rapid polymerization, and a relative high molecular weight. The degrees of branching of these HPPOs from the DMSO/K₂CO₃ and sulfolane/NaOH systems were 71 and 48%, respectively, as determined by ¹H NMR integration experiments. The phenolic terminal groups underwent facile modification, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain-end groups had a significant influence on the solubility of the hyperbranched poly(phenylene oxide)s. The resulting polymers were characterized by NMR, Fourier transform infrared, gel permeation chromatography (GPC), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC).     

Synthesis and characterization of novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives

Two novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylenevinylene} (EDP‐PPV) and poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDMP‐PPV), and their copolymer, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylene‐vinylene‐co‐2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDP‐co‐EDMP‐PPV; 4:1, 1:1, and 1:4), were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H‐NMR, ¹³C‐NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, and photoluminescence and electroluminescence (EL) spectroscopy. The EL polymers possessed excellent solubility in common solvents and good thermal stability with a 5% weight loss temperature of more than 380°C. The weight‐average molecular weights and polydispersity indices of EDP‐PPV, EDMP‐PPV, and EDP‐co‐EDMP‐PPV were 1.40–2.58 × 10⁵, and 1.19–1.52, respectively. Double‐layer light‐emitting diodes with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline)aluminum/Al devices were fabricated, and EDP‐co‐EDMP‐PPV (1:1) showed the highest EL performance and exhibited a maximum luminance of 1050 cd/m² at 19.5 V. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1259–1266, 2005     

Thermal,mechanical, and morphological characterization studies of poly(2,6‐dimethyl‐1,4‐phenylene oxide) blends with polystyrene and brominated polystyrene

The miscibility of the binary and ternary blends of poly(2,6‐dimethyl‐1,4‐phenylene oxide), brominated polystyrene, and polystyrene was investigated using a differential scanning calorimeter. The morphology of these blends was characterized by scanning electron microscopy. These studies revealed a close relation between the blend structure and its mechanical properties. The compatibilizing effect of poly(2,6‐dimethyl‐1,4‐phenylene oxide) on the miscibility of the polystyrene/brominated polystyrene blends was examined. It was found that poly(2,6‐dimethyl‐1,4‐phenylene oxide), which was miscible with polystyrene and partially miscible with brominated polystyrene, compatibilizes these two immiscible polymers if its contention exceeds 33 wt %. Upon the addition of poly(2,6‐dimethyl‐1,4‐phenylene oxide) to the immiscible blends of polystyrene/brominated polystyrene, we observed a change in the morphology of the mixtures. An improvement in the mechanical properties was noticed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 225–231, 2000     

Synthesis of poly(phenylene acetylene) from poly(phenylene vinylene)

Summary The objective of this work was to prepare films of poly(phenylene acetylene) from films of a precursor polymer, namely poly(a, a-dibromoxylylene). This polymer was obtained by selective bromination of the vinylene groups of poly(phenylene vinylene) films in bromine/CHCl₃. Pyrolytic dehydrobromination of the brominated films under argon atmosphere gave dark yellow films which showed about 65 wt% of desired phenylene acetylene units.     

Synthesis and characterization of novel soluble alternating copoly(phenylene vinylene) derivative for light‐emitting electrochemical cell

A novel alternating copolymer, poly{[2,5‐di(2‐(2‐ethoxy ethoxy)ethoxy)‐1,4‐phenylene vinylene]‐alt‐1,4‐[phenylene vinylene]}, has been synthesized through the Wittig condensation as electroluminescent material. In this copolymer, one component is phenylene vinylene with flexible oligo(ethylene oxide) side chain that facilitates ion transportation and phase miscibility between nonpolar and polar part of composite luminescent layer, and another is a rigid phenylene vinylene moiety to improve luminescent quantum efficiency and tune color. The copolymer shows good solubility and thermal stability for device fabrication compared to poly(phpeylene vinylene)(PPV). The band gap value of copolymer is between those of corresponding homopolymers, which indicates that alternating copolymerization is a suitable way to obtain luminescent polymer with desired band gap. The maximum wavelength of photoluminescence of copolymer is 539 nm (yellowish‐green). The HOMO and LUMO energy levels obtained by cyclic voltammetry measurement indicate that the electron injection ability of copolymer has been greatly improved compared with that of the PPV. A more balanced carrier injection and higher quantum efficiency are proved by electroluminescent properties of corresponding light‐emitting devices. The turn‐on voltage of LEC device (ITO/copolymer + PEO + LiClO₄/Al) is found to be 2.3 V, with current comparative to LED (ITO/copolymer/Al) at 9.5 V. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1350–1356, 2003     

Characterization of anisotropic structure in poly(phenylene vinylene) films

The evolution of the anisotropic structure in poly(phenylene vinylene) (PPV) films was studied using three nondestructive characterization techniques: prism waveguide coupling, infrared dichroism, and X‐ray diffraction. The anisotropic PPV films were thermally converted from precursor drawn films at fixed length. The three‐dimensional refractive indices, infrared dichroic ratios, crystal alignment, and orientation function were determined from each film. The results show that converted cast PPV film has a highly planar structure with a tendency for the PPV chains to orient parallel to the film surface. The a axis of the crystal unit cell is normal to the film plane. One‐way stretching converts the film from a planar structure to a uniaxial structure.     

Development and characterization of homogeneous membranes prepared from sulfonated poly(phenylene oxide)

This article investigates the comprehensive properties of sulfonated poly(phenylene oxide) (SPPO) membranes with different sulfonation degrees and presents the completion of previous work necessary for the application of SPPO membranes to proton‐exchange membrane fuel cells. The sulfonation level has been accurately determined by conductometric titration and ¹H‐NMR, and the glass‐transition temperature has been obtained with both differential scanning calorimetry and dynamic mechanical thermal analysis. Sulfonic groups attached to the aromatic ring in the poly(phenylene oxide) backbone split at 220–340°C, but the main‐chain splitting temperature of SPPO is similar to that of the pure polymer. In addition, the effects of sulfonic groups and water on the tensile strength of these membranes have been studied. An increase in the sulfonate groups in the polymer results in an increase in the water uptake. Atomic force microscopy phase images of the acid‐form membranes clearly show the hydrophilic domains, and the ionic regions of the membranes with a low sulfonation degree are isolated and become connected to produce a cocontinuous morphology as the degree of sulfonation increases. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1244–1250, 2005     

Electrodeposition of insulating poly(phenylene oxide) films with variable thickness

Ability to control key characteristics of electrodeposited polymers plays a vital role for their applications. In this work the results on tailoring the thickness of electronically insulating poly(phenylene oxide) (PPO) type polymer films have been showed. Pinhole‐free PPO films with variable thickness in the range of 10–50 nm were grown by controlling the potential applied during the electrochemical polymerization on the surface of titanium nitride (TiN) substrates. The insulating properties of the PPO film were confirmed by testing its permeability to redox species by cyclic voltammetry. Thermal stability of the PPO films with different thicknesses was investigated by in‐situ spectroscopic ellipsometry up to 400 °C in various environments. This insight is important for the optimization of the PPO anneal conditions in order to remove the residual solvent and potentially improve the polymer chains stacking. Our results provide the basis for electrodeposition of PPO films with variable thickness for diverse applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44533.     

Effect of high-performance polymers on crystallization and multiple melting behavior of poly(phenylene sulfide)

The crystallization and multiple melting behavior of poly(phenylene sulfide) (PPS) and its blends with amorphous thermoplastic bisphenol A polysulfone (PSF) and phenolphthalein poly(ether ketone) (PEK-C), crystalline thermoplastic poly(ether ether ketone) (PEEK), and thermosetting bismaleimide (BMI) resin were investigated by a differential scanning calorimeter (DSC). The addition of PSF and PEK-C was found to have no influence on the crystallization temperature (T_c) and heat of crystallization (ΔH_c) of PPS. A significant increase in the value of T_c and the intensity of the T_c peak of PPS was observed and the crystallization of PPS can be accelerated in the presence of the PEEK component. An increase in the T_c of PPS can also be accelerated in the BMI/PPS blend, but was no more significant than that in the PEEK/PPS blend. The T_c of PPS in the PEEK/PPS blends is dependent on the maximum temperature of the heating scans and can be divided into three temperature regions. The addition of a second component has no influence on the formation of a multiple melting peak. The double melting peaks can also be observed when PPS and its blends are crystallized dynamically from the molten state. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 637–644, 1998     

Macro-counterions in a precursor to poly(phenylene vinylene): Toward defect-free luminescent films

Thermal elimination of a water soluble poly(xylylidene) precursor to poly(phenylene vinylene) (PPV) was accomplished in air at 80 °C using the macro-counterion poly(ethylene glycol)-4-nonylphenyl-3-sulfopropyl ether (PEGNOPS). The high relative photoluminescence efficiency was ascribed to the low carbonyl content, with a possible contribution from PPV chain separation, which minimizes radiationless interchain exciton formation. In addition, the PEGNOPS precursor showed no carbonyl formation on long term storage, in contrast to the precursors with dodecylbenzene sulfonate and chloride counterions.     

Thin films of insoluble copolymer derived from poly(phenylene‐vinylene) obtained by thermal evaporation under vacuum

A new copolymer, referred to as poly(phenylene‐vinylene) (PPV)‐ether, built as PPV a polymer with some (? CH?CH? ) links changed into (? CH₂? O? CH₂? ) ethylic‐ether links, is insoluble in common solvents. PPV‐ether films are deposited by the thermal evaporation technique. X‐ray photoelectron spectroscopy for chemical analysis measurements indicate that the surface contamination decrease in the case of vacuum‐evaporated PPV‐ether. The scanning electron micrographs indicate that the surface of these vacuum‐deposited PPV‐ether are uniform. By comparison to the reference powder, the modification of the properties of the evaporated PPV‐ether are related to the decrease of the chain length and surface contamination. The results of the photoluminescence measurements reveal a shifting of the luminescence to blue in the vacuum‐evaporated PPV‐ether. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3091–3099, 2003