Characterization and electrochemical properties of carbon-coated Li4Ti5O12 prepared by a citric acid sol-gel method

Since carbon coating can effectively improve electrical wiring of Li₄Ti₅O₁₂ and thus enhance its high rate performance, a novel and simple citric acid sol-gel method for in situ carbon coating is employed in this study. The effects of the amount of the carbon source in the starting xerogel on the particle size, the resistance and the electrochemical performance of the synthesized Li₄Ti₅O₁₂ samples are systematically studied. The physical and electrochemical properties of the obtained samples have been characterized by XRD, TG-DSC, SEM, TEM, BET, A.C. impedance, galvanostatically charge-discharge and cyclic voltammetry tests. The results show that the initial amount of the carbon source in the starting xerogel is a critical factor which determines the content of the coated carbon and the pore volume, therefore governs the high rate performance of the Li₄Ti₅O₁₂/C composites. The Li₄Ti₅O₁₂/C composite with in situ carbon coating of 3.5 wt% exhibits the best electrochemical performance which delivers delithiation capacities of 143.6 and 133.5 mAh g⁻¹ with fairly stable cycling performance even after 50 cycles at 0.5C and 1C rate, respectively.     

Porous Li4Ti5O12 anode material synthesized by one-step solid state method for electrochemical properties enhancement

A porous Li₄Ti₅O₁₂ anode material was successfully synthesized from mixture of LiCl and TiCl₄ with 70 wt% oxalic acid by a modified one-step solid state method. The anode material Li₄Ti₅O₁₂ exhibited a cubic spinel structure and only one voltage plateau occurred around 1.5 V. The initial capacity of porous Li₄Ti₅O₁₂ was 167 and 133 mAh g⁻¹ at 0.5 and 1C charge/discharge rate, respectively, and the capacity retention maintained above 98% after 200 cycles. The porous Li₄Ti₅O₁₂ structure showed promising rate performance with a capacity of 70 mAh g⁻¹ at charge/discharge 10C rate after 200 cycles. It was demonstrated that the porous structure could withstand 50C charge/discharge rate and exhibited excellent cycling stability.     

Sol-gel synthesis and electrochemical performance of Li4Ti5O12/graphene composite anode for lithium-ion batteries

Li₄Ti₅O₁₂/graphene composite was prepared by a facile sol-gel method. The lattice structure and morphology of the composite were investigated by X-ray diffraction (XRD) and scanning electronic microscopy (SEM). The electrochemical performances of the electrodes have been investigated compared with the pristine Li₄Ti₅O₁₂ synthesized by a similar route. The Li₄Ti₅O₁₂/graphene composite presents a higher capacity and better cycling performance than Li₄Ti₅O₁₂ at the cutoff of 2.5-1.0 V, especially at high current rate. The excellent electrochemical performance of Li₄Ti₅O₁₂/graphene electrode could be attributed to the improvement of electronic conductivity from the graphene sheets. When discharged to 0 V, the Li₄Ti₅O₁₂/graphene composite exhibited a quite high capacity over 274 mAh g⁻¹ below 1.0 V, which was quite beneficial for not only the high energy density but also the safety characteristic of lithium-ion batteries.     

Low temperature synthesis of Fe3O4 micro-spheres and its application in lithium ion battery

Fe₃O₄ micro-spheres with nanoparticles close-packed architectures were synthesized via a simple chemical method using (NH₄)₂Fe(SO₄)₂·6H₂O, hexamethylenetetramine, and NaF as reaction materials. This chemical synthesis took place in a vitreous jar under low temperature (90 °C) and atmospheric pressure. The morphology and structure of the as-synthesized products were characterized by field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and Raman spectrum. Electrochemical properties of the as-synthesized Fe₃O₄ micro-spheres as anode electrode of lithium ion batteries were studied by conventional charge/discharge tests, which exhibit steady charge/discharge platforms at different current densities. The as-prepared Fe₃O₄ electrode shows high initial discharge capacity of 1166 and 1082 mAh g⁻¹ at current density of 0.05 and 0.1 mA cm⁻², respectively.     

Enhanced electrochemical performances of multi-walled carbon nanotubes modified Li3V2(PO4)3/C cathode material for lithium-ion batteries

The multi-walled carbon nanotubes (MWCNTs) modified Li₃V₂(PO₄)₃/C composite is synthesized by polyvinyl alcohol (PVA) based carbon-thermal reduction method using MWCNTs as a highly conductive agent. PVA mainly supplies a reductive atmosphere to reduce V⁵⁺ and provides a network of carbon to inhibit the aggregation of Li₃V₂(PO₄)₃ particles. The amorphous carbon coating and MWCNTs co-modified composite shows excellent high-rate lithium intercalation/deintercalation property and cycling performance between 3.0 and 4.3 V. The discharge capacities of 131.7 and 122.9 mAh g⁻¹ are obtained at rates of 1 C and 10 C, respectively, for the Li₃V₂(PO₄)₃/(C + MWCNTs). These improvements are attributed to the valid conducting networks of C + MWCNTs and the reduced Li₃V₂(PO₄)₃ particle size by the network carbon from the pyrolysis of PVA.     

Synthesis and electrochemical performance of Li(Ni0.8Co0.15Al0.05)0.8(Ni0.5Mn0.5)0.2O2 with core-shell structure as cathode material for Li-ion batteries

The core-shell structure cathode material Li(Ni_0.8Co_0.15Al_0.05)_0.8(Ni_0.5Mn_0.5)_0.2O₂ (LNCANMO) was synthesized via a co-precipitation method. Its applicability as a cathode material for lithium ion batteries was investigated. The core-shell particle consists of LiNi_0.8Co_0.15Al_0.05O₂ (LNCAO) as the core and a LiNi_0.5Mn_0.5O₂ as the shell. The thickness of the LiNi_0.5Mn_0.5O₂ layer is approximately 1.25 μm, as estimated by field emission scanning electron microscopy (FE-SEM). The cycling behavior between 2.8 and 4.3 V at a current rate of 18 mA g⁻¹ shows a reversible capacity of about 195 mAh g⁻¹ with little capacity loss after 50 cycles. High-rate capability testing shows that even at a rate of 5 C, a stable capacity of approximately 127 mAh g⁻¹ is retained. In contrast, the capacity of LNCAO rapidly decreases in cyclic and high rate tests. The observed higher current rate capability and cycle stability of LNCANMO can be attributed to the lower impedance including charge transfer resistance and surface film resistance. Differential scanning calorimetry (DSC) indicates that LNCANMO had a much improved oxygen evolution onset temperature of approximately 251 °C, and a much lower level of exothermic-heat release compared to LNCAO. The improved thermal stability of the LNCANMO can be ascribed to the thermally stable outer shell of LiNi_0.5Mn_0.5O₂, which suppresses oxygen release from the host lattice and not directly come into contact with the electrolyte solution. In particular, LNCANMO is shown to exhibit improved electrochemical performance and is a safe material for use as an electrode for lithium ion batteries.     

A ZrSiO4/SiC oxidation protective coating for carbon/carbon composites

In order to improve the oxidation resistance of carbon/carbon (C/C) composites, a ZrSiO₄ coating on SiC pre-coated C/C composites was prepared by a hydrothermal electrophoretic deposition process. Phase compositions and microstructures of the as-prepared ZrSiO₄/SiC coating were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The anti-oxidation property and failure mechanism of the multi-layer coating were investigated. Results show that hydrothermal electrophoretic deposition is an effective route to prepare crack-free ZrSiO₄ outer coatings. The multi-layer coating obviously exhibits two-layer structure. The inner layer is composed of SiC phase and the outer layer is composed of ZrSiO₄ phase. The bonding strength between the outer layer coatings and C/C–SiC substrate are 30.38 MPa. The ZrSiO₄/SiC coating displays excellent oxidation resistance and can protect C/C composites from oxidation at 1773 K for 332 h with a mass loss rate of only 0.48 × 10^− 4 g/cm²·h. The mechanical properties of the specimens are 84.36 MPa before oxidation and 68.29 MPa after oxidation. The corresponding high temperature oxidation activation energy of the coated C/C composites at 1573–1773 K is calculated to be 119.8 kJ/mol. The oxidation process is predominantly controlled by the diffusion rate of oxygen through the ZrSiO₄/SiC multi-coating. The failure of the coating is due to the formation of penetrative holes between the SiC bonding layer and the C/C matrix at 1773 K.     

Effect of the impurity LixNi1−xO on the electrochemical properties of 5 V cathode material LiNi0.5Mn1.5O4

The formation of impurity Li_xNi_1−xO when synthesizing spinel LiNi_0.5Mn_1.5O₄ using solid state reaction method, and its influence on the electrochemical properties of product LiNi_0.5Mn_1.5O₄ were studied. The secondary phase Li_xNi_1−xO emerges at high temperature due to oxygen deficiency for LiNi_0.5Mn_1.5O₄ and partial reduction of Mn⁴⁺ to Mn³⁺ in LiNi_0.5Mn_1.5O₄. Annealing process can diminish oxygen deficiency and inhibit impurity Li_xNi_1−xO. The impurity reduces the specific capacity of product, but it does not have obvious negative effect on cycle performance of product. The capacity of LiNi_0.5Mn_1.5O₄ that contains Li_xNi_1−xO can deliver about 120 mAh g⁻¹.     

Effects of K2O-Li2O doping on surface and catalytic properties of Fe2O3/Cr2O3 system

The effects of K₂O and Li₂O-doping (0.5, 0.75 and 1.5 mol%) of Fe₂O₃/Cr₂O₃ system on its surface and the catalytic properties were investigated. Pure and differently doped solids were calcined in air at 400-600 °C. The formula of the un-doped calcined solid was 0.85Fe₂O₃:0.15Cr₂O₃. The techniques employed were TGA, DTA, XRD, N₂ adsorption at −196 °C and catalytic oxidation of CO oxidation by O₂ at 200-300 °C. The results revealed that DTA curves of pure mixed solids consisted of one endothermic peak and two exothermic peaks. Pure and doped mixed solids calcined at 400 °C are amorphous in nature and turned to α-Fe₂O₃ upon heating at 500 and 600 °C. K₂O and Li₂O doping conducted at 500 or 600 °C modified the degree of crystallinity and crystallite size of all phases present which consisted of a mixture of nanocrystalline α- and γ-Fe₂O₃ together with K₂FeO₄ and LiFe₅O₈ phases. However, the heavily Li₂O-doped sample consisted only of LiFe₅O₈ phase. The specific surface area of the system investigated decreased to an extent proportional to the amount of K₂O and Li₂O added. On the other hand, the catalytic activity was found to increase by increasing the amount of K₂O and Li₂O added. The maximum increase in the catalytic activity, expressed as the reaction rate constant (k) measured at 200 °C, attained 30.8% and 26.5% for K₂O and Li₂O doping, respectively. The doping process did not modify the activation energy of the catalyzed reaction but rather increased the concentration of the active sites without changing their energetic nature.     

Synthesis and electrochemical properties of porous LiV3O8 as cathode materials for lithium-ion batteries

In this paper, we report on the synthesis of porous LiV₃O₈ by using a tartaric acid-assisted sol-gel process and their enhanced electrochemical properties for reversible lithium storage. The crystal structure, morphology and pore texture of the as-synthesized samples are characterized by means of XRD, SEM, TEM/HRTEM and N₂ adsorption/desorption measurements. The results show that the tartaric acid plays a pore-making function and the calcination temperature is an important influential factor to the pore texture. In particular, the porous LiV₃O₈ calcined at 300 °C (LiV₃O₈-300) exhibits hierarchical porous structure with high surface area of 152.4 m² g⁻¹. The electrochemical performance of the as-prepared porous LiV₃O₈ as cathode materials for lithium ion batteries is investigated by galvanostatic charge-discharge cycling and electrochemical impedance spectroscopy. The porous LiV₃O₈-300 displays a maximum discharge capacity of 320 mAh g⁻¹ and remains 96.3% of its initial discharge capacity after 50 charge/discharge cycles at the current density of 40 mA g⁻¹ due to the enhanced charge transfer kinetics with a low apparent activity energy of 35.2 kJ mol⁻¹, suggesting its promising application as the cathode material of Li-ion batteries.     

Ultrasonic-assisted in situ synthesis and characterization of superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were synthesized via a modified coprecipitation method, and were characterized with X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Zeta potential and FT-IR, respectively. The influences of different kinds of surfactants (sodium dodecyl benzene sulfonate, polyethyleneglycol, oleic acid and dextran), temperatures and pH values on the grain size and properties were also investigated. In this method, Fe³⁺ was used as the only Fe source and partially reduced to Fe²⁺ by the reducing agent with precise content. The following reaction between Fe³⁺, Fe²⁺ and hydroxide radical brought pure Fe₃O₄ nanoparticles. The tiny fresh nanoparticles were coated in situ with surfactant under the action of sonication. Comparing with uncoated sample, the mean grain size and saturation magnetization of coated Fe₃O₄ nanoparticles decrease from 18.4 nm to 5.9-9.0 nm, and from 63.89 emu g⁻¹ to 52-58 emu g⁻¹ respectively. When oleic was used as the surfactant, the mean grain size of Fe₃O₄ nanoparticles firstly decreases with the increase of reaction temperature, but when the temperature is exceed to 80 °C, the continuous increase of temperature resulted in larger nanoparticles. the grain size decreases gradually with the increasing of pH values, and it remains unchanged when the PH value is up to 11. The saturation magnetization of as-prepared Fe₃O₄ nanoparticles always decreases with the fall of grain size.     

Preparation, structure and photoluminescence of nanoscaled-Nd: Lu3Al5O12

Nd:Lu₃Al₅O₁₂ (Nd:LuAG) nano-crystalline was synthesized by co-precipitation method. Its phase transformation, structure, absorption and photoluminescence properties were studied. The Nd:LuAG polycrystalline phase is formed above 900 °C and its particle sizes are in the range of 18-36 nm. The structure of Nd:LuAG was refined by Rietveld method. The lattice parameters and the distortion of Lu³⁺-O²⁻ polyhedron in Nd:LuAG are larger than that of in pure LuAG. Because the distortion of Lu³⁺-O²⁻ polyhedron is larger than that of Y³⁺-O²⁻ polyhedron in YAG and the distance of Lu³⁺-O²⁻ is smaller than that of Y³⁺-O²⁻ in YAG, Nd³⁺ in LuAG experiences a stronger crystal field effect, which is proved by the crystal field strength and the chemical environment parameter. The absorption spectrum shows that Nd:LuAG has a broad absorption band at 808 nm with FWHM above 6 nm, which is favorable for improving laser efficiency. The fluorescence lifetime from ⁴F_3/2 → ⁴I_11/2 transition is 320 μs and longer than that of Nd:YAG. The longer lifetime is propitious to energy storage. The emission cross section at 1064 nm is 2.89 × 10⁻¹⁹ cm², taking into account the Boltzmann distribution of the excited state. The emission cross section in Nd:LuAG is also larger than that of Nd:YAG, which is useful for laser operation. All results indicate that Nd:LuAG is a promising crystal material to apply in high energy lasers.     

Effect of Cr7C3 on the mechanical, thermal, and electrical properties of Cr2AlC

In this work, phase pure Cr₂AlC and impure Cr₂AlC with Cr₇C₃ have been fabricated to investigate the mechanical, thermal, and electrical properties. The thermal expansion coefficient is determined as 1.25 × 10⁻⁵ K⁻¹ in the temperature range of 25-1200 °C. The thermal conductivity of the Cr₂AlC is 15.73 W/m K when it is measured at 200 °C. With increasing temperature from 25 °C to 900 °C, the electrical conductivity of Cr₂AlC decreases from 1.8 × 10⁶ Ω⁻¹ m⁻¹ to 5.6 × 10⁵ Ω⁻¹ m⁻¹. For the impure phase of Cr₇C₃, it has a strengthening and embrittlement effect on the bulk Cr₂AlC. And the Cr₂AlC with Cr₇C₃ would result in a lower high-temperature thermal expansion coefficient, thermal conductivity, specific heat capacity and electrical conductivity.     

Electrochemical performance of magnetron sputter deposited LiFePO4-Ag composite thin film cathodes

LiFePO₄ thin films have been sputtered from a pure LiFePO₄ target onto Ag/SS, Ag/Si₃N₄/Si and Si₃N₄/Si substrates. All of the deposited films were annealed at 973 K for 1 hr in H₂/Ar (5 %) atmosphere. Substrate induced microstructural and crystallographic evolutions have been observed by a scanning electron microscope and X-ray diffraction. Energy dispersion spectra and X-ray photoelectron spectra revealed that Ag was mixed in the LiFePO₄ films deposited on Ag under layers. Ceramic metal composite thin films were obtained. The film conductivity (1 × 10^− 3 Scm^− 1) is therefore elevated by an order of six, compared with pure LiFePO₄ (10^− 9 Scm^− 1). The electrochemical measurements of the LiFePO₄-Ag films showed a flat plateau at 3.4 V (v.s. Li/Li⁺) and a reversible capacity of 80 mAh/g. Optimization of Ag contents may further improve the discharge capacity.     

Synthesis of MnO/C composites through a solid state reaction and their transformation into MnO2 nanorods

MnO nanospheres encapsulated in carbon (MnO/C) composites were synthesized through a one-step solid state reaction between potassium permanganate and salicylic acid at 700 °C, which could be transformed into MnO₂ nanorods after being annealed in ambient atmosphere. Their formation mechanisms and electrochemical performances as anodes in Li-ion batteries (LIBs) were investigated. The first discharge capacity of MnO/C composites was 585.9 mA h g⁻¹, while that of MnO₂ was 1269 mA h g⁻¹, indicating their potential applications in LIBs.     

Electromagnetic wave absorption properties of mechanically mixed Nd2Fe14B/C microparticles

Nd₂Fe₁₄B/C microparticles were prepared by a mechanical mixing technique using a weight ratio of 2:1. Paraffin-bonded Nd₂Fe₁₄B/C composites were fabricated using 40 wt% microparticles, and their electromagnetic wave absorption properties were studied and compared with those of the paraffin-bonded Nd₂Fe₁₄B composites in the 2-18 GHz frequency range and for 1-5 mm thickness. The Nd₂Fe₁₄B/C-paraffin composites exhibit dual dielectric resonance in complex relative permittivity (?_r) and essentially flat response in complex relative permeability (μ_r) rather than showing an abrupt change in both ?_r and μ_r as in the Nd₂Fe₁₄B-paraffin composites. The results are ascribed to the increased electrical resistivity in the Nd₂Fe₁₄B/C-paraffin composites and the protection on the magnetic properties of the Nd₂Fe₁₄B microparticles at 2-18 GHz by the presence of the C phase. Large reflection loss (RL) exceeding −10 dB and an optimal RL of −13.2 dB are achieved in the Nd₂Fe₁₄B/C-paraffin composites from 9.6 to 18 GHz at a thickness of 1.4-2.6 mm and at 18 GHz at a thickness of 1.4 mm, respectively.     

Preparation and characterization of spinel Li4Ti5O12 anode material from industrial titanyl sulfate solution

Spinel Li₄Ti₅O₁₂ anode material is successfully synthesized by a solid-state method using lithium carbonate and titanium precursors which are prepared by the low cost industrial titanyl sulfate solution. The characters of H₂TiO₃ and TiO₂ precursors are determined by TG/DTA and SEM methods. TG-DAT and EDS methods show that H₂TiO₃ can absorb sulphate ions which can be present as impurities. XRD method shows that the impure phases of Li₂SO₄ and rutile TiO₂ appear in Li₄Ti₅O₁₂ synthesized by H₂TiO₃. The formation of Li₂SO₄ is identified in thermodynamics during the process of calcination. Owing to the formation of Li₂SO₄ impurity, the capacity of the Li₄Ti₅O₁₂ synthesized by H₂TiO₃ is low. One effective way that can tackle this problem is to remove the sulphur by calcining H₂TiO₃, after calcinations, the production will have a thermal treatment with Li₂CO₃. The obtained Li₄Ti₅O₁₂ shows better electrochemical performance. The specific capacities can be increased by 20 mAh g⁻¹ at 0.1, 0.5 and 1C rates.     

Complex permeability and microwave absorption properties of planar anisotropy Ce2Fe17N3−δ particles

The effective complex permeability of Ce₂Fe₁₇N_3−δ particles/epoxy resin composites with various volume concentrations p were measured in the frequency range of 0.1-15 GHz. The intrinsic quasi-static permeability μ^′0,i of Ce₂Fe₁₇N_3−δ particle was calculated by Bruggerman's (BG) effective medium theory. Meanwhile, the effective quasi-static permeability μ^′0,e of composites were calculated by the BG theory and modified Bruggerman's (MBG) effective medium theory, respectively. Through analyzing the experiment data, the effective shape factors of Ce₂Fe₁₇N_3−δ composites were determined. The intrinsic natural resonance frequency of Ce₂Fe₁₇N_3−δ was obtained using Landua-Lifshitz-Gilbert (LLG) equation. The minimum EM absorbing values with RL ≤ −30 dB are observed for all the volume concentrations.     

Synthesis and electrochemical properties of Li4Ti5O12

The spinel compound Li₄Ti₅O₁₂ was synthesized by a solid state method. In this synthesizing process, anatase TiO₂ and Li₂CO₃ were used as reactants. The influences of reaction temperature and calcination time on the properties of products were studied. When calcination temperature was 750 °C and calcination temperature was 24 h, the products exhibited good electrochemical properties. Its discharge capacity reached 160 mAh g⁻¹ and its capacity retention was 97% at the 50th cycle when the current rate was 1 C. When current rate increased to 10 C, its first discharge capacity could reach 136 mAh g⁻¹, and its capacity retention was 85% at the 50th cycle.     

Microwave dielectric properties and its compatibility with silver electrode of Li2MgTi3O8 ceramics

The effects of BaCu(B₂O₅) (BCB) additions on the sintering temperature and microwave dielectric properties of Li₂MgTi₃O₈ ceramic have been investigated. The pure Li₂MgTi₃O₈ ceramic shows a relative high sintering temperature (∼1000 °C) and good microwave dielectric properties as Q × f of 40,000 GHz, ?_r of 27.2, τ_f of 2.6 ppm/°C. It was found that the addition of a small amount of BCB can effectively lower the sintering temperature of Li₂MgTi₃O₈ ceramics from 1025 to 900 °C and induce no obvious degradation of the microwave dielectric properties. Typically, the 0.5 wt% BCB added Li₂MgTi₃O₈ ceramic sintered at 900 °C for 2 h exhibited good microwave dielectric properties of Q × f = 36,200 GHz (f = 7.31 GHz), ?_r = 26 and τ_f = −2 ppm/°C. Compatibility with Ag electrode indicates this material can be applied to low temperature-cofired ceramics (LTCC) devices.