Preparation of amidoximated polyester fiber and competitive adsorption of some heavy metal ions from aqueous solution onto this fiber

In this study, a fibrous adsorbent containing amidoxime groups was prepared by graft copolymerization of acrylonitrile (AN) onto poly(ethylene terephthalate) (PET) fibers using benzoyl peroxide (Bz₂O₂) as initiator in aqueous solution, and subsequent chemical modification of cyano groups by reaction with hydroxylamine hydrochloride in methanol. The grafted and modified fibers were characterized by FTIR, TGA, SEM, and XRD analysis. The crystallinity increased, but thermal stability decreased with grafting and amidoximation. The removal of Cu(II), Ni(II), Co(II), Pb(II), and Cd(II) ions from aqueous solution onto chelating fibers were studied using batch adsorption method. These properties were investigated under competitive conditions. The effects of the pH, contact time, and initial ion concentration on the removal percentage of ions were studied. The results show that the adsorption rate of metal ions followed the given order Co(II) > Pb(II) > Cd(II) > Ni(II) > Cu(II). The percentage removal of ions increased with initial ion concentration, shaking time, and pH of the medium. Total metal ion removal capacity was 49.75 mg/g fiber on amidoximated fiber. It was observed that amidoximated fibers can be regenerated by acid without losing their activity, and it is more selective for Pb(II) ions in the mixed solution of Pb‐Cu‐Ni–Co‐Cd at pH 4. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Retention of Pb(II) by a Low-Cost Magnetic Composite Prepared by Environmentally-Friendly Plasma Technique

A low-cost magnetic composite (gelatin/Fe₃O₄) is prepared by Fe₃O₄ nanoparticles treated with gelatin using an environmentally-friendly plasma technique, and is applied for the removal of toxic Pb(II) ions from aqueous solutions. Not only that it originates from cheap and abundant raw materials, the gelatin/Fe₃O₄ composite also has advantages in convenient magnetic separation from aqueous solution, which can hopefully reduce water treatment expenses. The batch experimenta results indicate that the maximum adsorption capacity (q_max) of Pb(II) on this gelatin/Fe₃O₄ composite is ～115 mg/g, higher than most of the other bare and modified magnetic materials, which is considered to be attributed to the strong interaction between Pb(II) and the abundant functional groups introduced by gelatin. When exposed to acidic solutions, the dissolution of the gelatin/Fe₃O₄ nanoparticles is minimal due to the protective character of the grafted gelatin layer on the Fe₃O₄ nanoparticles. The utilization of the plasma technique in the synthesis of magnetic composite agrees well with the tenet of green chemistry. It is promising that this gelatin/Fe₃O₄ composite would become an efficient and economic material for heavy metal ion removal in the practical environmental remediation.     

Removal properties of crosslinked poly(2‐acrylamido glycolic acid) for trace heavy metal ions: Effect of pH,temperature, contact time,and salinity on the adsorption behavior

Crosslinked poly(2‐acrylamido glycolic acid) resin was synthesized by radical polymerization. This resin contains three potential ligand groups and was studied as an adsorbent of trace heavy metal ions from a saline aqueous solution and sea water by using the Batch equilibrium procedure. Adsorption characteristics of the resin toward Cu(II), Ni(II), Cd(II), and Pb(II) were studied spectrophotometrically, both in competitive and noncompetitive conditions. The effect of pH, contact time, amount of sorbent, temperature, and salinity were studied. The resin showed a high affinity particularly for Ni(II). It was possible to remove completely Ni(II) and Pb(II) from the resin by 4M HNO₃. The retention properties of the resin were also investigated for Cu(II) contained in natural sea waters. The retention behavior was similar to that of the synthetic metal ion aqueous solution. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2614–2621, 2003     

Removal of Ni(II), Cd(II), and Pb(II) from a ternary aqueous solution by amino functionalized mesoporous and nano mesoporous silica

In the present study, the application for the removal of Ni(II), Cd(II) and Pb(II) ions from aqueous solution by using mesoporous silica materials, namely, MCM-41, nanoparticle of MCM-41, NH₂-MCM-41 (amino functionalized MCM-41) and nano NH₂-MCM-41 was investigated. Suitable adsorbents preparation techniques were developed in the laboratory. The effects of the solution pH, metal ion concentrations, adsorbent dosages, and contact time were studied. It was found that NH₂-MCM-41 showed the highest uptake for metal ions in aqueous solution. The results indicated that the adsorption of Ni(II), Cd(II) and Pb(II) ions on the surface of the adsorbent was increased with increasing solution pH. The experimental data were analyzed using the Langmuir and Freundlich equations. Correlation coefficients were determined by analyzing each isotherm. It was found that the Langmuir equation showed better correlation with the experimental data than the Freundlich. According to the parameters of the Langmuir isotherm, the maximum adsorption capacity of NH₂-MCM-41 for Ni(II), Cd(II) and Pb(II) was found to be 12.36, 18.25 and 57.74 mg/g, respectively. The kinetic data of adsorption reactions and the evaluation of adsorption equilibrium parameters were described by pseudo-first-order and pseudo-second-order equations. The synthesized solid sorbents were characterized by Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen sorption measurements.     

Synthesis of Magnetic Fe3O4 Modified Graphene Nanocomposite and its Application on the Adsorption of some Dyes from Aqueous Solution

A novel magnetic Fe₃O₄ modified reduced graphene oxide nanocomposite (Fe₃O₄@SiO₂-rGO) was prepared by a covalent bonding method. The morphology and properties of the Fe₃O₄@SiO₂-rGO were characterized by transmission electron microscopy and X-ray diffraction. The prepared Fe₃O₄@SiO₂-rGO was tested as an efficient adsorbent for the removal of some dyes from aqueous solution for the first time. The performance of Fe₃O₄@SiO₂-rGO was evaluated using methylene blue and neutral red as model compounds. Experiments were carried out to investigate the adsorption kinetics and adsorption capacity of the adsorbent and the effect of the adsorbent dosage and sample solution pH on the removal of the dyes. Kinetic data were well fitted by pseudo second-order model. The Langmuir model and the Freundlich model were used to study the adsorption isotherms. The Fe₃O₄@SiO₂-rGO nanocomposite showed to be a highly efficient adsorbent with the advantage of separation convenience. The thermodynamic parameters indicated that the adsorption of the dyes onto the Fe₃O₄@SiO₂-rGO was a spontaneous process.     

Valine-Coated Magnetic Nanoparticles: Synthesis,Characterization, and Application in Removal of Cd(II) Ions from Aqueous Solution

A novel Valine coated magnetic nano-particles (MNPs-Val) has been synthesized for the removal of Cd(II) ions from aqueous solution. The MNPs-Val were developed by electrostatic attraction of valine (C₅H₁₁NO₂) on the bare surface of Fe₃O₄ nanoparticles and characterized by using FT-IR, XRD, SEM, and TEM analysis. The morphology and average particles size 15-27 nm of MNPs-Val were analyzed by SEM and TEM. The coated MNPs were applied for adsorptive removal of Cd(II) ions from aqueous solutions. Factors affecting the adsorption of Cd(II) ions on the MNPs-Val surface such as the pH, temperature, adsorbent dosage, and contact time were investigated which have significant effect on the metal ion removal. The Cd(II) ions adsorption equilibrium on the MNPs-Val could be achieved in 35 min at the optimized pH 5 and follow the pseudo-second order kinetics model. The experimental data for the adsorption of Cd(II) was followed by the Langmuir isotherm and the maximum adsorption capacity was obtained at 0.2 g L^?1 adsorbent dose at 308 K.     

A novel lead ion‐imprinted chelating nanofiber: Preparation,characterization, and performance evaluation

A novel Pb(II) ion‐imprinted chelating nanofibers (nIIP), synthesized by combining electrospinning with surface ion imprinting technique, was reported in this study. nIIP was characterized with Fourier transmission infrared spectrometry and scanning electron microscopy, respectively. The performance of nIIP for Pb(II) sorption was conducted through a batch adsorption experiments. Experimental data showed that adsorption capacity of nIIP was much higher than that of non‐ion imprinted chelating acrylic microfibers (mNIP) derived from commercial available acrylic microfibers, and adsorption behaviors agreed well with pseudo‐second‐order kinetic and Langmuir isotherm model. The values of Gibbs free energy change derived from experimental data suggested that the adsorption Pb(II) on nIIP is spontaneous and favorable at high temperature. In addition, nIIP had the highest selectivity among three tested fibrous adsorbents for Pb(II) from binary metal solution, the selectivity coefficients for Pb(II) from binary metal solution of Pb(II)/Cu(II), Pb(II)/Ni(II), and Pb(II)/Cd(II) onto nIIP were 47, 101, and 162, respectively. Besides, a forty adsorption/desorption cycles revealed that nIIP was a promising recyclable adsorbent. In conclusion, the novel nIIP is a highly effective adsorbent for enrichment and separation of Pb(II) in the presence of competitive ions in aqueous solution, and it is potential to be applied for recovering metals from heavy metal polluted industrial wastewater such as Pb(II)/Cd(II), Pb(II)/Ni(II), and Pb(II)/Cu(II) polluted wastewater. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41507.     

Facile preparation of magnetic chitosan modified with thiosemicarbazide for adsorption of copper ions from aqueous solution

In this study, magnetic chitosan modified with thiosemicarbazide (TSC‐Fe₃O₄/CTS) was facilely synthesized with glutaraldehyde as the crosslinker, and its application for removal of Cu(II) ions was investigated. The as‐prepared TSC‐Fe₃O₄/CTS was characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray powder diffraction (XRD), and scanning electron microscopy (SEM). The results showed that TSC‐Fe₃O₄/CTS has high adsorption capacity and selectivity towards Cu(II) ions. Adsorption experiments were carried out with different parameters such as pH, solution temperature, contact time and initial concentration of Cu(II) ions. The adsorption process was better described by the pseudo‐second‐order model. The sorption equilibrium data was fitted well with the Langmuir isotherm model and the maximum adsorption capacity toward Cu(II) ions was 256.62 mg/g. The thermodynamic parameters indicated that the adsorption process of Cu(II) ions was exothermic spontaneous reaction. Moreover, this adsorbent showed excellent reusability and the adsorption property remained stable after five cycles. This adsorbent is believed to be one of the promising and favorable adsorbent for the removal of Cu(II) ions from aqueous solution. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44528.     

Synthesis of new chelating ion exchange resin with hydroxamic and amidoxime groups and study of its metal binding property

The synthesis of a new chelating ion exchanger with hydroxamic and amidoxime groups was performed by an aminolysis reaction of an ethylacrylate/acrylonitrile/divinylbenzene copolymer with hydroxylamine in the presence of sodium ethoxylate. We studied the retention property of the new resin for Pb(II), Cd(II), Cu(II), Ni(II), Zn(II), Mn(II), and Fe(III) metal cations from aqueous solutions. The retention capacity depends on the contact time, the pH of the solution, and the types of counterions of the metal cations. Competitive adsorptions of Pb(NO₃)₂ + Fe₂(SO₄)₃, Pb(NO₃)₂ + MnSO₄, Pb(NO₃)₂ + Cd(NO₃)₂, and Pb(NO₃)₂ + CuCl₂ on the new chelating ion exchanger were performed. The results showed that the resin preferentially retained the Pb(II) ions from the binary aqueous mixtures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2956–2962, 2003     

Adsorption of some heavy metal ions from aqueous solutions on Nafion 117 membrane

Nafion 117 membrane was investigated for the removal of Ni(II), Co(II), Pb(II), Cu(II) and Ag(I) metal ions from their synthesized aqueous solutions. The different variables affecting the adsorption capacity of the membrane such as contact time, initial metal ion concentration in the feed solution, pH of the sorption medium and temperature of the solution were investigated on a batch sorption basis. The affinity of Nafion 117 membrane towards heavy metal ions was found to increase in the sequence of Cu(II), Ni(II), Co(II), Pb(II), and Ag(I) with adsorption equilibrium achieved after 30 min for all metal ions. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 3.1-5.9. The variation of temperature in the range of 25-65 °C was found to have no significant effect on the adsorption capacity. Nafion 117 membrane was found to have high stability combined with repeated regeneration ability and can be suggested for effective removal of heavy metal ions such as Cu(II), Ni(II) and Co(II) from aqueous solutions.     

Continuous preparation of Fe3O4 nanoparticles combined with surface modification by L-cysteine and their application in heavy metal adsorption

L-cysteine functionalized Fe₃O₄ magnetic nanoparticles (Cys–Fe₃O₄ MNPs) were continuously fabricated by a simple high-gravity reactive precipitation method combined with surface modification through a novel impinging stream-rotating packed bed with the assistance of sonication. The obtained Cys–Fe₃O₄ MNPs was characterized by XRD, TEM, FTIR, TGA and VSM, and further used for the removal of heavy metal ions from aqueous solution. The influence of pH values, contact time and initial metal concentration on the adsorption efficiency were investigated. The results revealed that the adsorption of Pb(II) and Cd(II) were pH dependent process, and the pH 6.0 was found to be optimum condition. Moreover, the adsorption kinetic for Cys–Fe₃O₄ MNPs followed the mechanism of the pseudo-second order kinetic model, and their equilibrium data were fitted with the Langmuir isothermal model well. The maximum adsorption capacities calculated from Langmuir equation were 183.5 and 64.35 mg g⁻¹ for Pb(II) and Cd(II) at pH 6.0, respectively. Furthermore, the adsorption and regeneration experiment showed there was about 10% loss in the adsorption capacity of the as-prepared Cys–Fe₃O₄ MNPs for heavy metal ions after 5 times reuse. All the above results provided a potential method for continuously preparing recyclable adsorbent applied in removing toxic metal ions from wastewater through the technology of process intensification.     

A new functionalized reduced graphene oxide adsorbent for removing heavy metal ions in water via coordination and ion exchange

ABSTRACT

Heavy metal ion pollution has become a serious problem. In this paper, a new type of adsorbent, reduced graphene oxide grafted by 4-sulfophenylazo groups (RGOS), was synthesized to adsorb heavy metal ions in an aqueous solution via two kinds of adsorption modes, ion exchange and coordination. The maximum adsorption capacities of the RGOS for Pb(II), Cu(II), Ni(II), Cd(II) and Cr(III) were 689, 59, 66, 267 and 191 mg/g, respectively. Adsorption equilibrium time of RGOS for heavy metal ions is no more than 10 min. Adsorption mechanism was supposed based on elemental analyses, adsorption data, and Fourier transform infrared spectra.     

Preparation and Characterization of Charred Xanthated Sugarcane Bagasse for the Separation of Heavy Metals From Aqueous Solutions

Introduction of xanthate group onto sugarcane (Saccharum officinarum) bagasse has been investigated for the removal of cadmium, lead, nickel, zinc, and copper from their aqueous media. The charred xanthated sugarcane bagasse (CXSB) was found to have significant adsorption capacity which is more than that of various bio-sorbents mentioned in the available literatures. The newly developed bio-sorbent was characterized by SEM, FTIR, TGA/DTA, and elemental analysis. The velocity of sorption of the tested metals was fast, reaching equilibrium within 40 min. The maximum loading capacities was found to be 225 for Cd(II), 318 for Pb(II), 144 for Ni(II), 164 for Zn(II), and 178 for Cu(II) mg g^?1, respectively. The fast kinetics results and high adsorption capacity indicated that CXSB can be applied as the selective adsorbent for the treatment of heavy metal ions from aqueous solutions.     

Investigation of adsorption of lead,mercury and nickel from aqueous solutions onto carbon aerogel

Recently a new form of activated carbon has appeared: carbon aerogel (CA). Its use for the removal of inorganic (and especially metal ions) has not been studied. In the present study, the adsorption of three metal ions, Hg(II), Pb(II) and Ni(II), onto carbon aerogel has been investigated. Batch experiments were carried out to assess adsorption equilibria and kinetic behaviour of heavy metal ions by varying parameters such as agitation time, metal ions' concentration, adsorbent dose and pH. They facilitated the computation of kinetic parameters and maximum metal ion adsorption capacities. Increasing the initial solution pH (2–10) and carbon concentration (50–500 mg per 50 cm³) increases the removal of all three metal ions. A decrease of equilibrium pH with an increase of metal ion concentration led us to propose an adsorption mechanism by ion exchange between metal cations and H⁺ at the carbon aerogel surface. Carboxylic groups are especially involved in this adsorption mechanism. Langmuir and Freundlich isotherm models were used to analyse the experimental data of carbon aerogel. The thermodynamics of the metal adsorption was also investigated for the practical implementation of the adsorbent. The sorption showed significant increase with increase of temperature. Kinetics models describing the adsorption of Hg(II), Pb(II) and Ni(II) ions onto carbon aerogel have been compared. Kinetics models evaluated include the pseudo‐first order and second order model. The parameters of the adsorption rate constants have been determined and the effectiveness of each model assessed. The result obtained showed that the pseudo‐second order kinetic model correlated well with the experimental data and better than the pseudo‐first order model examined in the study. Mass transfer coefficients obtained can be useful in designing wastewater treatment systems or in the development of environmental technologies. Copyright © 2005 Society of Chemical Industry     

New Inorganic–Organic Hybrid Materials and Their Oxides for Removal of Heavy Metal Ions: Response Surface Methodology Approach

In this paper, Cu(II), Fe(III), Pb(II), and Zn(II) heavy metal ions were removed from their aqueous solutions by using novel inorganic–organic hybrid materials, Al-GPTS-H and Al-GPTS-NaOSiMe₃-H (hybrid material-1 and 2, respectively), and their oxides (calcined-1 and 2) as adsorbents. These ions removal by adsorption was optimized by using response surface methodology (RSM). Central composite design (CCD) method was used in order to investigate the effects of initial pH, initial metal concentration of solutions and adsorbent quantity on the adsorption efficiency (R, %). As a result of the experiments under optimum conditions, the maximum % R values were obtained by hybrid material-1 for Fe(III) (99.89%) and by calcined material-1 for Pb(II) (97.14%), respectively. These quite high adsorption efficiency values have shown that these hybrid materials and their oxides are suitable to use for heavy metal ions removal from aqueous solutions.     

Cysteine-metal affinity chromatography: determination of heavy metal adsorption properties

Various adsorbent materials have been reported in the literature for heavy metal removal. We have developed a novel approach to obtain high metal sorption capacity utilising cysteine containing adsorbent. Metal complexing aminoacid-ligand cysteine was immobilised onto poly(hydroxyethylmethacrylate) (PHEMA) microbeads. PHEMA-cysteine affinity microbeads containing 0.318 mmol cysteine/g were used in the removal of heavy metal ions (i.e. copper, lead and cadmium) from aqueous media containing different amounts of these ions (50–400 mg/l for Pb(II) and Cd(II), 25–60 mg/l for Cu(II)) and at different pH values (4.0–7.0). The maximum adsorption capacity of heavy metal ions onto the cysteine-containing microbeads under non-competitive conditions were 0.259 mmol/g for Pb(II), 0.330 mmol/g for Cd(II) and 0.229 mmol/g for Cu(II). The affinity order was observed as follows: Cd(II)>Pb(II)>Cu(II). The competitive adsorption capacities of the heavy metals were 0.260 mmol/g for Cd(II) and 0.120 mmol/g for Cu(II). Pb(II) adsorption onto cysteine-immobilised microbeads was zero under competitive conditions. The affinity order was as follows: Cd(II)>Cu(II)>Pb(II). The formation constants of cysteine–metal ion complexes have been investigated applying the method of Ruzic. The calculated value of stability constants were 1.75×10⁴ l/mol for Pb(II)–cysteine complex and 4.35×10⁴ l/mol for Cd(II)–cysteine complex and 1.39×10⁴ l/mol for Cu(II)–cysteine complex. PHEMA microbeads carrying cysteine can be regenerated by washing with a solution of hydrochloric acid (0.05 M). The maximum desorption ratio was greater than 99%. These PHEMA microbeads are suitable for repeated use for more than three adsorption–desorption cycles without considerable loss in adsorption capacity.     

Influence of Fe3O4 nanoparticles decoration on dye adsorption and magnetic separation properties of Fe3O4/rGO nanocomposites

Magnetite (Fe₃O₄) nanoparticles were prepared by solvothermal method and its composites with reduced graphene oxide namely FG1, FG2, and FG3 (changing magnetite precursor loading 0.1, 0.5, and 1 respectively) were used as adsorbents for the removal of methyl violet (MV) dye. The structural and morphological results confirm that rGO sheets were decorated with Fe₃O₄ and it ensures the variation of active sites toward dye removal property. The maximum adsorption capacity obtained for FG2 was 196 mg/g. The adsorption isotherms and kinetics better fit Langmuir and pseudo-second-order kinetic model for FG1 and FG2. Increasing of Fe₃O₄ loading on rGO reduces the dye adsorption sites and too low Fe₃O₄ loading affects the magnetic separation. The optimal loading of Fe₃O₄ on rGO is important parameter for the adsorption process and fast separation of adsorbent.     

Synthesis and characterization of polyacrylamide‐grafted coconut coir pith having carboxylate functional group and adsorption ability for heavy metal ions

The present investigation was undertaken to evaluate the effectiveness of a new adsorbent prepared from coconut coir pith (CP), a coir industry‐based lignocellulosic residue in removing metal ions from aqueous solutions. The adsorbent (PGCP‐COOH) having a carboxylate functional group at the chain end was prepared by grafting polyacrylamide onto CP using potassium peroxydisulphate as an initiator and in the presence of N,N′‐methylenebisacrylamide as a crosslinking agent. The adsorbent was characterized by infrared (IR) spectroscopy, thermogravimetry (TG), X‐ray diffraction (XRD) patterns, scanning electron microscopy (SEM), and potentiometric titration. The adsorbent exhibits very high adsorption potential for the removal of Pb(II), Hg(II), and Cd(II) ions from aqueous solutions. The optimum pH range for metal ion removal was found to be 6.0–8.0. The adsorption process follows a pseudo‐second‐order kinetic model. The adsorption capacities for Hg(II), Pb(II), and Cd(II) calculated using the Langmuir isotherm equation were 254.52, 189.49, and 63.72 mg g^?1, respectively. Adsorption isotherm experiments were also conducted for comparison with a commercial carboxylate form cation exchanger. Different industry wastewater samples were treated by the PGCP‐COOH to demonstrate its efficiency in removing heavy metals from wastewater. The reusability of the PGCP‐COOH was also demonstrated using 0.2M HCl. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 3670–3681, 2007     

Facile Synthesis of FeCo/Fe3O4 Nanocomposite with High Wave-Absorbing Properties

The FeCo/Fe₃O₄ nanocomposite was synthesized using the hydrothermal approach, in which the FeCo alloy and Fe₃O₄ are formed by one step. The structure of the FeCo/Fe₃O₄ nanocomposite was characterized by means of Scanning electron microscopy (SEM), X-ray diffraction (XRD) and X-ray energy-dispersive spectrometer spectroscopy (EDX). They show that the mass ratio of FeCo/Fe₃O₄ strongly depends on the reaction temperature. Such various architectures follow a stepwise growth mechanism of the composites prepared in various reaction temperatures were also discussed. It indicates that this strategy is facile, effective and controllable for the synthesis of FeCo/Fe₃O₄ by the one-step method. Furthermore, the magnetic and wave-absorbing properties of the nanocomposites with various structures were investigated in detail. The results show that the FeCo/Fe₃O₄ with higher mass ratio has higher magnetic properties. Moreover, the FeCo/Fe₃O₄ nanocomposite shows high wave-absorbing properties (e.g., −37.9 dB), which are expected to apply in microwave absorbing materials.