Interactions in the LiPO3 — MoO3, NaPO3 — MoO3, and KPO3 — MoO3 systems

The MPO₃ — MoO₃ (M=Li, Na, K) pseudobinary systems have been examined by differential thermal analysis and x-ray phase analysis. The phase diagrams have been derived, and the temperatures and compositions of the eutectics have been determined. The compounds have been examined by x-ray phase analysis, infrared spectroscopy, and diffuse reflection spectroscopy. The conductivity and optical properties of the compounds MMoO₂(PO₄) (M=Li, Na, K) have been determined. The coordinates of the liquidus lines have been used to calculate the activities of the components in the MPO₃ — MoO₃ systems. Those activities show large negative deviations from ideal solutions. This indicates strong interaction between particles in the liquid state. Translated from Poroshkovaya Metallurgiya, Nos. 3–4(412), pp. 33–40, March–April, 2000.     

3 200 m3高炉工程经营管理

经营管理是企业管理重要工作之一,经营管理水平的高低,直接影响企业和工程项目的经济效益.在3 200 m3高炉工程建设中围绕工程合同,搞好经营计划、预算的审查,避免工程项目款项超拨失控现象.     

3 200 m3高炉工程施工管理

论述了3 200 m3高炉工程的施工原则、施工管理、施工机械管理的具体内容.通过严格的管理,保证施工进度、工程质量和安全文明施工.     

Ca3La(BO3)3中Dy3+的光致发光

研究了Ca3La(BO3)3基质中Dy^3 的发射光谱和激发光谱。结果表明，强的激发峰值为351nm、367nm和386nm；Dy^3 的488nm和578nm发射的最佳浓度均为xDy=0．03；Dy^3 发射的黄光和蓝光强度比(用Y／B表示)随Dy^3 浓度的增加而逐渐增大；Dy^3 的^4F9/2→^6H15/2、^6H13/2跃迁发射的浓度猝灭机理均为电偶极-电偶极相互作用；同时还探讨了Ce^3 对Dy^3 发光的敏化作用。     

Dy^3＋在（LaO）3BO3和（GdO）3BO3中的光致发光

研究了Ｄｙ＾３＋在（ＬａＯ）３ＢＯ３和（ＧｄＯ）３ＢＯ３中的光致发光;探讨了基质晶体结构、稀土离子ＲＥ＾３＋的电荷半径比（Ｚ／ｒ）和Ｄｙ＾３＋含量对（Ｄｙ＾３＋）发光强度及发光颜色的影响;分析了（ＧｄＯ）３ＢＯ３中Ｂｉ＾３＋对Ｄｙ＾３＋发光的敏化作用及Ｄｙ＾３＋４Ｆ９／２→＾６Ｈ１３／２超灵敏跃迁发射的自身浓度猝灭机理。     

Bi_3PbSr_3Ca_3Cu_4O_y超导体的颗粒超导性

本文对Bi_3PbSr_3Ca_3Cu_4O_y超导体进行了超导电性、磁阻、输运特性等的测量。并利用结构分析等方法,对超导体的颗粒超导性进行了研究。试验观察到了负磁阻效应、回滞和热激活行为,以及颗粒间晶界对输运特性的影响。并对以上结果进行了较详细的分析。     

Luminescence properties of Tm^3＋/Yb^3＋, Er^3＋/Yb^3＋ and Ho^3＋/Yb^3＋ activated calcium tungstate

CaWO4 phosphor activated by the Tm3+/Yb3+,Er3+/Yb3+ and Ho3+/Yb3+ ions were synthesized by a traditional high-temperature solid-state method.The crystal structures and morphologies of the products were characterized by X-ray powders diffraction method(XRD) ,infrared spectra(FT-IR) and scanning electron microscopy(SEM) .The samples were found to show up-conversion luminescence properties.CaWO4 doped with Tm3+/Yb3+ showed blue luminescence characteristic of Tm(III) ion in the range of 460-485 nm,corresponding to the 1G4→3H6 electronic transition.CaWO4 doped with Er3+/Yb3+ showed strong green luminescence at 510-565 nm(2H11/2,4S3/2→4I15/2) and weak red luminescence at 640-685 nm(4F9/2→4I15/2) of Er(III) ion.CaWO4 doped with Ho3+/Yb3+ phosphor emitted green luminescence at 525-560 nm(5S2,5F4→5I8) and red luminescence at 630-670 nm(5F5→5I8) and at 730-770 nm(5S2,5F4→5I7) ,which is the characteristic of Ho(III) ion.     

3 200 m3高炉工程物资供应管理

介绍了3 200 m3高炉工程建设中的材料供应、物资采购和设备供应等管理制度及执行情况.保证了材料供应优质及时,设备能按安装进度组织到货,使工程顺利进行.     

3 200 m3高炉工程质量控制管理

论述了3 200 m3高炉工程质量控制要点、施工质量控制措施和管理办法.建立健全了质量保证体系,强化职工质量意识.通过加强技术、质量管理,使工程质量处于受控状态.施工过程中采用新工艺、新技术,实现了工程创优规划的预期效果.     

3 200 m3高炉工程桩基工程施工

通过解决、处理天钢二期工程桩基施工中遇到的实际问题,总结了桩基施工中常见问题处理方法及预防措施.     

白光LED用LaPO4:Eu3+红色荧光粉的合成与表征

利用水热法制备了性能稳定的红色荧光粉LaPO4:Eu3+,同时研究了不同的Eu3+浓度、煅烧温度对荧光粉发光性能的影响.通过X射线粉末衍射(XRD)和扫描电子显微镜(SEM)来表征荧光粉的晶体结构和颗粒大小及形貌;用激发光谱和发射光谱以及荧光衰减曲线来表征荧光粉的荧光性能.结果表明:未煅烧时前躯体主要是六方晶相LaPO4·0.5H2O,煅烧温度在900℃时,所制备样品为单斜相LaPO4:Eu3+;SEM图像显示5 at.%Eu3+掺杂LaPO4呈椭球形,颗粒长约为500 nm,宽约为300 nm.最大发射波长和激发波长分别为592 nm和393 nm,发射光谱中592 nm和612 nm的发射峰对应的是Eu3+离子的5D0→7F1和5D0→7F2跃迁.其荧光寿命为3.32 ms.     

Properties of red-emitting phosphors Sr2MgSi2O7:Eu3+ prepared by gel-combustion method assisted by microwave

Novel red-emitting phosphors Sr2MgSi2O7:Eu3+ were prepared by gel-combustion method assisted by microwave. The phase struc-ture and luminescent properties of as-synthesized phosphors were investigated by XRD and fluorescence spectrophotometer, respectively. The results showed that the as-synthesized sample was Sr2MgSi2O7 with tetragonal crystal structure. The excitation spectrum of Sr2MgSi2O7:Eu3+ was composed of two major parts: one was the broad band between 200 and 350 nm, which belonged to the charge transfer of Eu3+-O2-; the other consisted of a series of sharp lines between 350 and 450 nm, ascribed to the f-f transition of Eu3+. The emission spec-trum consisted of two emission peaks at 593 and 616 nm, which was attributed to 5D0→7F1 and 5D0→7F2 of Eu3+, respectively. The concen-tration of Eu3+ (x) had great effect on the emission intensity of Sr2-xMgSi2O7:Eu3+x. When x varied in the range of 0.04-0.18, the intensity of emission peaks at 593 and 616 nm increased gradually with the concentration of Eu3+ increasing. It was interesting that no concentration quenching occurred. Moreover, the luminescent intensity could be greatly enhanced with incorporation of charge compensator Li+ ions.     

Luminescent properties of Ba3Gd（BO3）3：Eu^3＋ phosphor for white LED applications

Luminescent material Ba3Gd(BO3)3 doped with Eu3+ ion was prepared by high temperature solid-state method. The preparing conditions, luminescent properties, and particle morphology of Ba3Gd(BO3)3:Eu3 + phosphor were studied with X-ray diffraction (XRD), fluorescence spectroscopy, and scanning electron microscopy (SEM). The results obtained by XRD showed that pure phase of Ba3Gd(BO3)3 was obtained at 1000℃. Images from SEM displayed that the particles of Ba3Gd(BO3)3:Eu3+ phosphor had a spherical shape with an average diameter of about 200-400 nm. The luminescence spectra showed that Ba3Gd(BO3)3:Eu3+ phosphor was effectively excited by the near ultraviolet (UV) light (396 nm) and blue light (466 nm). The main emission peaks of Ba3Gd(BO3)3:Eu3+ phosphor were assigned to the supersensitive transition 5D0-7F2 (611 and 616 nm) of Eu3+ ion when samples were excited at 255 and 396 nm, respectively, and the luminescent intensity of Ba3Gd(BO3)3:Eu3+ at 611 and 616 nm reached to the maximum when the doped content of Eu3+ ion was 10mol.%. Therefore, this phosphor could be a promising red component for possible applications in the field of white LED.     

Preparation and Characterization of Sol-Gel Derived Au Nanoparticle Dispersed Y2O3：Eu Films

Gold nanoparticles dispersed Y2O3 films were prepared through a sol-gel method by using yttrium acetate and Au nanoparticles colloid as precursors. The films were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM） and UV-VIS absorption spectra. XRD patterns and TEM images of Y2O3 ＋ Au films give the same resuits on structure and particle size as that of pure Y2O3 films. The surface plasma resonance （SPR） of Au nanoparticles in Y2O3 ＋ Au film was observed around 550 nm in the absorption spectrum and its position shifts to red with increasing annealing temperature is caused by the increase of dielectric constant of Y2O3 matrix and the size of Au nanoparticles. The second and third order nonlinear optical effects of Y2O3 ＋ Au films were also observed. The photoluminescent properties of Y2O3 ： Eu ＋ Au films were investigated and results indicate that there exist an energy transfer from Eu^3 ＋ to Au nanoparticles and this energy transfer decreases the emission of Eu^3 ＋ in Y2O3 ： Eu ＋ Au film.     

Luminescence properties of YAl3(BO3)4 phosphors doped with Eu3+ ions

YAl3(BO3)4: Eu3+ phosphors were prepared by the conventional solid state reaction. The phase structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). Doping YAl3(BO3)4: Eu3+ phosphors with concentration of Eu3+ ions of 0, 2, 5, 8 and 10 mol% were studied and their luminescent properties at room temperature were discussed. The excitation spectrum of Y0.95Eu0.05Al3(BO3)4 was composed of a broad band centered at about 252 nm and a group of lines in the longer wavelength re-gion. In the emission spectra, the peak wavelength was about 614 nm under a 252 nm UV excitation. The optimal doping concentration of Eu<3+ ions in YAl3(BO3)4: Eu3+ phosphors was 8 mol%.     

Luminescent properties of Eu~(3+) doped Gd_2WO_6 and Gd_2(WO_4)_3 nanophosphors prepared via co-precipitation method

Eu3+ doped Gd2WO6 and Gd2(WO4)3 nanophosphors with different concentrations were prepared via a co-precipitation method. The structure and morphology of the nanocrystal samples were characterized by using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM), respectively. The emission spectra and excitation spectra of samples were measured. J-O parameters and quantum efficiencies of Eu3+ 5D0 energy level were calculated, and the concentration quenching of Eu3+ luminescence in dif...     

Synthesis and photoluminescent properties of water-soluble TbF_3 nanoparticles

Monodispersed and water-soluble TbF3 nanoparticles were synthesized at a relatively low temperature in aqueous solution using citric acid as an additive,and characterized by X-ray diffraction(XRD),field emission scanning electron microscopy(FE-SEM),Fourier transform infrared spectra(FTIR),photoluminescence(PL) spectra and lifetime.The as-prepared TbF3 nanoparticles had orthorhombic structure and were composed of monodispersed spherical particles with an average particle size of 50 nm.The excitation spectrum...     

Luminescent properties of Eu³⁺-doped BaZrO₃ phosphor for UV white light emitting diode

A novel orange phosphor Eu3+ doped barium zirconate(BaZrO3) was synthesized by conventional solid state reaction method and its crystal structure and luminescent properties were investigated in this paper.The X-ray diffraction patterns(XRD) showed that simple BaZrO3 phase was obtained.Monitoring at 596 nm,the excitation spectrum consisted of a broad band and a series of narrow bands and the stronger excitation peaks located at 275 and 393 nm,respectively.The emission spectrum excited by 393 nm UV light was composed of four narrow bands.The strongest emission was located at 596 nm.The appropriate concentration of Eu3+ was 0.025(molar fraction) for the highest emission intensity at 596 nm.The H3BO3 and ammonium were added as flux and the results showed that 2 wt.% NH4F ions was the optimal flux for BaZrO3:Eu3+.     

Cooperative energy transfer in Eu3+,Yb3+ codoped Y2O3 phosphor

Under 980 nm laser excitation,red emission(5D0-7FJ(J=0,1,2)) of Eu3+ was observed in cubic Y2O3 codoped with Eu3+ and Yb3+.The dependence of the upconverted emission on doping concentration and laser power was studied.Yb3+ emission around 1000 nm(2F5/2-2F7/2) was reported upon excitation of Eu3+ ions.The decay curves of 5DJ(J=0,2) emission of Eu3+ under excitation of 266 nm pulse laser were examined to investigate the Eu3+→Yb3+ energy transfer process.Cooperative energy transfer process was discussed as the possible mechanism for the visible up-conversion luminescence of Eu3+ and near-infrared down-conversion emission of Yb3+.     

Luminescent properties of Ca2SiO4:Eu3+ red phosphor for trichromatic white light emitting diodes

The luminescent properties of Eu3 doped Ca2SiO4 red phosphors synthesized by the flux fusion reaction method were investigated. It was found that the excitation spectrum included two regions: the weak excitation band below 325 nm and strong narrow peaks above 325 nm. The main peak of the excitation band was located at 400 nm. The peaks located at 290 nm were assigned to the combination of the charge transfer transition of O-Eu, peaks above 325 nm (325, 385, 400, 470, 511, and 539 nm) were assigned to the f–f transitions of Eu3 . The emission spectrum was dominated by the red peak located at 612 nm due to the electric dipole transition of 5D0–7F2. In addition, the ef- fects of the Eu3 content and charge compensators of Li , Na , K , and Cl– ions on the emission intensity were investigated. The experiment results suggested that the strongest emission was obtained when the concentration of the Eu3 ions was 0.3 mol–1, and Li ions gave the best improvement to enhance the emission intensity. Ca2SiO4:Eu3 , Li was thus suitable for low-cost trichromatic white light emitting diodes (WLED) based on UV InGaN chip.